Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (14) (entfernen)
Schlagworte
- Nanopulver (3)
- Dispergierung (2)
- Folie (2)
- Partikelgröße (2)
- Porosity (2)
- Tribologie (2)
- Agglomeration (1)
- Average pore size (1)
- Bending strenght (1)
- Bending strength (1)
Influence of Slip Viscosity on the Mechanical Properties of High Purity Alumina made by Gelcasting
(1997)
The infrared-optical properties and particularly the emissivity of sintered ceramics depend on the material's bulk properties and structural properties such as porosity, pore size distribution and pore diameter. The infrared-optical properties can be varied across a wide range by specifically selecting the material's bulk and structural properties. A major concern of the present study is the development of a ceramic coating material with a total emissivity below 0.2 at a temperature of 800 °C. For this purpose, various samples of a TiO2-Y2O3 (TY) ceramic composite were produced with different properties. On variation in the Y2O3 content from 5 to 60 wt%, the porosity of the ceramic composites varies from 3 % to 47 % with the mean pore diameter lying in a range from 0.3 µm to 1.7 µm. The addition of graphitic pore builders increases the porosity up to 60 % and the mean pore diameter to a maximum of 15 µm. By optimizing the total porosity and the pore size of the TY ceramics, a total emissivity as low as 0.17 at 800 °C could be achieved.
Die Dispergiereigenschaften von verschiedenen nanoskaligen Pulvern mit unterschiedlicher Kornfraktion im Bereich von 10 bis 250 nm werden in verdünnten und konzentrierten keramischen Schlickern mit der Ultraschallspektroskopie untersucht. Alle stabilen Suspensionen weisen im entsprechenden pH-Bereich eine monomodale Partikelgrößenverteilung auf. Durch die Charakterisierung der Suspensionen mit der Ultraschallspektroskopie kann eine verbesserte Bewertung hinsichtlich Homogenität und Agglomeratbildung auch für nanoskalige Pulver erhalten werden. Dies ermöglicht eine bessere Qualitätskontrolle prozessrelevanter Schritte bei der Verarbeitung.