Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (132)
- Vortrag (40)
- Zeitschriftenartikel (25)
- Posterpräsentation (4)
- Buchkapitel (3)
- Monografie (1)
- Beitrag zu einem Sammelband (1)
Schlagworte
- Transport (28)
- Radioactive material (18)
- Impact limiter (17)
- Radioaktive Stoffe (14)
- Transport packages (14)
- IAEA (13)
- Fire test (11)
- Wood (10)
- Numerical analysis (9)
- Package (9)
- Safety assessment (9)
- Drop test (7)
- FEM (7)
- Numerische Analyse (7)
- Spent fuel (7)
- Thermal test (7)
- Ageing (6)
- Drop testing (6)
- Pressure build-up (6)
- Shock absorber (6)
- Spent nuclear fuel (6)
- Transport package (6)
- Transportbehälter (6)
- Dual purpose casks (5)
- Fire (5)
- Mechanische Bewertung (5)
- Drop tests (4)
- Dual purpose cask (4)
- Fallprüfungen (4)
- Fuel rods (4)
- High burn-up (4)
- IAEA regulations (4)
- Interim storage (4)
- Leakage rate (4)
- Mechanik (4)
- Package design (4)
- Radioactive materials (4)
- Radioactive waste (4)
- Radioaktives Material (4)
- Seals (4)
- Simulation (4)
- Smouldering (4)
- Spent fuel assessment (4)
- Storage (4)
- Testing (4)
- Zwischenlagerung (4)
- Acceleration (3)
- Bauartprüfung (3)
- Beförderung (3)
- Cask (3)
- Combustion (3)
- Containment (3)
- Design testing (3)
- Explicit dynamics (3)
- FEA (3)
- Fallprüfung (3)
- Gefahrgut (3)
- Großkomponenten (3)
- IAEA puncture drop test (3)
- Kerntechnische Anlagen (3)
- Mechanical analysis (3)
- Metal seals (3)
- Retention (3)
- Routine conditions of transport (3)
- Rückbau (3)
- Safety (3)
- Similarity (3)
- Smoldering (3)
- Transport conditions (3)
- Typ-B (3)
- Wet content (3)
- Zulassung (3)
- Acceleration values (2)
- Accident transport conditions (2)
- Activity release (2)
- Aging (2)
- Aging management (2)
- Aging mechanisms (2)
- Anerkennung (2)
- Assessment (2)
- Bolt design (2)
- Calculation (2)
- Closure system (2)
- Corrosion (2)
- Crush test (2)
- Cylindrical cask (2)
- Disposal (2)
- Dual Purpose Casks (2)
- Failure (2)
- Finite element methods (2)
- Fracture Mechanics (2)
- Full-scale (2)
- Gas generation (2)
- Heat Flux (2)
- High level waste (2)
- ISO (2)
- Kerntechnik (2)
- Lagerung (2)
- Large scale testing (2)
- Load attachment (2)
- Load cycles (2)
- Material (2)
- Maximum deceleration (2)
- Maximum deformation (2)
- Mechanical assessment (2)
- Moisture content (2)
- Nuclear fuel (2)
- Package testing (2)
- Propane (2)
- Quality assurance (2)
- RAM (2)
- Radioactive (2)
- Radioaktiv (2)
- Regulations (2)
- Scaling (2)
- Secondary impact (2)
- Spent fuel transport cask (2)
- Spruce wood (2)
- Stowage (2)
- Strahlenschutz (2)
- Structural Health Monitoring (2)
- Thermal analysis (2)
- Transport Package (2)
- Transport Packages (2)
- Transport cask (2)
- Transport safety (2)
- Trunnion (2)
- Type-B (2)
- Type-B Package (2)
- Validation (2)
- Valve (2)
- Verification (2)
- Welding (2)
- Wet intermediate level waste (2)
- 1-m-Fallprüfung (1)
- 1-m-punch-bar-drop-test (1)
- ACT (1)
- Accident Scenario (1)
- Accident conditions (1)
- Accident conditions of transport (1)
- Ageing Management (1)
- Ageing mechanisms (1)
- Aktivitätsfreisetzung (1)
- Alterung (1)
- Aluminium (1)
- Antragsverfahren (1)
- Appendix IV (1)
- Approved packages (1)
- Assessment method (1)
- Assessment of leak tightness (1)
- B(U) (1)
- BAM-GGR 016 (1)
- BIM (1)
- Bar length (1)
- Basket design (1)
- Belastungsversuch (1)
- Boiled joints (1)
- Bolted flange joints (1)
- Bolted trunnion (1)
- Brennelementverhalten (1)
- Bruchmechanik (1)
- Burn-up (1)
- Calorimeter (1)
- Calorimetric test (1)
- Cask design (1)
- Cesium corrosion (1)
- Chrush (1)
- Cladding (1)
- Cladding alloy (1)
- Cladding failure (1)
- Containment analysis (1)
- Containment compliance (1)
- Content simulation (1)
- Convection (1)
- Criticality (1)
- Criticality analysis (1)
- Criticality safety analysis (1)
- Crush testing (1)
- Decommissioning (1)
- Design approval (1)
- Design assessment (1)
- Design assessment of RAM packages (1)
- Design computations (1)
- Design of the packaging attachment points (1)
- Digital Models (1)
- Dop test (1)
- Drop Tests (1)
- Drop height adaption (1)
- Druckaufbau (1)
- Dry storage (1)
- Ductile cast iron (1)
- Dynamic simulation (1)
- Dynamics (1)
- ENSA (1)
- Electrical resistance method (1)
- Encapsulation (1)
- Encapsulations for damaged spent nuclear fuel (1)
- Endlager (1)
- Entsorgung (1)
- Experience feedback list (1)
- Experimental testing (1)
- Extended storage (1)
- FE mesh refinement (1)
- Fallversuch (1)
- Finite Element Analysis (1)
- Finite Element Simulation (1)
- Finite Elemente Simulation (1)
- Finite element (1)
- Finite element analysis (1)
- Finite element calculation (1)
- Finite element model (1)
- Fire Qualification (1)
- Fire Reference (1)
- Fire Reference Package (1)
- Fire Test Stand (1)
- Fire testing (1)
- Flask (1)
- Fracture initiation (1)
- Friction (1)
- Fuel assemblies (1)
- Fuel rod (1)
- Gap analysis (1)
- Gasket (1)
- Gefahrgutregeln der BAM (1)
- German guideline BAM-GGR 012 (1)
- Großer Fallturm Horstwalde (1)
- Guide (1)
- Heat (1)
- Heat flux (1)
- High-level waste (1)
- Hot cell (1)
- Hot cell testing (1)
- Hydrogen (1)
- Hüllrohr (1)
- IAEA Regu-lations (1)
- IAEA Regulations (1)
- IAEA advisory material TS-G-1.1 (1)
- IAEA fire testing (1)
- IAEA regulations (SSR-6, SSG-26) (1)
- IAEO (1)
- ILW package (1)
- IP-2 (1)
- IP-3 (1)
- Impact (1)
- Impact behavior (1)
- Inspections (1)
- Insulation (1)
- Internal collision (1)
- Internal gaps (1)
- Internal impacts (1)
- Internal shock absorber (1)
- Intumescent material (1)
- Inventaraufprall (1)
- Inventarverhalten (1)
- Kritikalität (1)
- Ladungssicherung (1)
- Lagerbehälter (1)
- Large components (1)
- Large objects (1)
- Lastanschlag (1)
- Leakage mechanism (1)
- Leaktightnes (1)
- Length of puncture bar (1)
- Lid behavior (1)
- Lid/content interaction (1)
- Load cases (1)
- Load cases for transport (1)
- Local and nominal assessment criteria (1)
- Local stress and strain fields (1)
- Log term behavior (1)
- Long-term storage (1)
- Lost cases (1)
- Management (1)
- Management system (1)
- Manufacturing (1)
- Material model (1)
- Material model wood (1)
- Mechanical behavior of wood (1)
- Mechanical behaviour (1)
- Mechanical tests (1)
- Mechanisches Verhalten (1)
- Mechanism (1)
- Metal seals reliability (1)
- Modalanalyse (1)
- Modelling of gaskets (1)
- Moisture metre (1)
- Multi-Modal Transportation Test (1)
- NCT (1)
- New package design (1)
- Non-approved (1)
- Normen (1)
- Nuclear power plant (1)
- Numerical approach (1)
- Numerical calculations (1)
- Numerical modelling (1)
- Numerical simulation (1)
- Operating procedures (1)
- Package assessment (1)
- Package safety (1)
- Packages for radioactive material (1)
- Packaging (1)
- Periodical Review (1)
- Periodical review (1)
- Pressure (1)
- Pressure build up (1)
- Propane gas (1)
- Puncture Bar Drop Test (1)
- Puncture bar drop test (1)
- Puncture bar test (1)
- Puncture drop test (1)
- Quality Management (1)
- Quality management system (1)
- RAM transport package (1)
- Radioactive Material (1)
- Radioactive Materials (1)
- Radioactive material cask (1)
- Radioactive material storage (1)
- Radioactive material transport (1)
- Radioactive materials transport (1)
- Radioactve (1)
- Radioaktive (1)
- Radioaktive Abfälle (1)
- Radioaktive Materialien (1)
- Radiolysis (1)
- Real transport (1)
- Reduced scale packages (1)
- Regeln (1)
- Regulation (1)
- Results from experiments (1)
- Revision of load case data (1)
- Rückbau kerntechnischer Anlagen (1)
- SCO-III (1)
- SNF (1)
- SNL (1)
- SSR-6 (1)
- Safety Analysis (1)
- Scale Models (1)
- Scaled model (1)
- Schwingungsdynamik (1)
- Sea (1)
- Sealed sources (1)
- Sealing (1)
- Sealing behavior (1)
- Ship (1)
- Sicherheit (1)
- Sicherheitstechnische Auslegung (1)
- Similarity theory (1)
- Slap-down (1)
- Spalte (1)
- Special encapsulation (1)
- Special form radioactive material (1)
- Spent Nuclear Fuel (1)
- Spent fuel assemblies (1)
- Spent fuel behavior (1)
- Spent fuel behaviour (1)
- Spent fuel/high-level waste (1)
- Spruce (1)
- Stahldorn (1)
- Stoßdämpfende Bauteile (1)
- Structural analysis (1)
- Surveillance (1)
- System Identification (1)
- Thermal Design (1)
- Thermal Test (1)
- Thermal testing (1)
- Thermal tests (1)
- Thermik (1)
- Thermo-mechanical analyses (1)
- Tie-down and stowage (1)
- Transport and storage cask (1)
- Transport and storage casks (1)
- Transport and storage casks for spent nuclear fuel or high level waste (1)
- Transport casks (1)
- Transport of radaioactive materials (1)
- Transport of radioactive materials (1)
- Transport package design (1)
- Transport packages for radioactive material (1)
- Transportability (1)
- Transportation (1)
- Transportation of radioactive materials (1)
- Trunnion design (1)
- Trunnions (1)
- Ttransport (1)
- Typ (1)
- Typ A (1)
- Typ B(U)-Verpackung (1)
- Typ-B Versandstück (1)
- Type B (1)
- UF6 (1)
- Uranhexaflourid (1)
- Vapourisation (1)
- Verifizierung (1)
- Verpackung (1)
- Verzögerungswerte (1)
- Water (1)
- Wet Content (1)
- Zulassungen (1)
- radioaktives Material (1)
- Überwachung (1)
Organisationseinheit der BAM
Specific attention should be paid on safety demonstrations transmitted by applicants in the case of approval request for the package designs containing enriched UF6. Concerning the shipment of enriched UF6, the package designs consist in general of a filled 30B cylinder surrounded by an overpack.
The description of the content, considering the UF6 origin, i.e. natural or reprocessed, shall be clearly justified especially when the UF6 isotopic composition exceeds the limits specified in ASTM standards.
Concerning the containment of the UF6, the applicant shall demonstrate in all conditions of Transport the leak-tightness of the valve and plug of the cylinders filled with enriched UF6. In this regard, when justifications are based on numerical calculations, the absence of contact between These components of the cylinder and the internal surfaces of the overpack after the regulatory drop tests shall be shown. In particular, absence of contact between the valve and any other component of the packaging shall be confirmed to respect the current IAEA regulations [3]. If complementary calculations show a contact between the plug and the internal surfaces of the overpack, additional tests are required to confirm that the strength resulting from this contact will not affect the plug leak-tightness. It can be noticed that the future revision of the IAEA regulations will include additional provision in case of contact of the plug with any other component of the packaging. In addition, the applicant shall demonstrate that the melting temperature of the valve, including the tinned joint, will not be exceeded during the regulatory fire test.
Furthermore, the representativeness of the ballast used to simulate the behaviour of the UF6 loaded within the cylinder shall be justified if drop tests are performed.
Finally, specific provisions relative to the use of plugs and the maintenance of cylinders should be included in the safety analysis reports.
When storage of spent nuclear fuel or high level waste is carried out in dual purpose casks (DPC), the effects of aging on safety relevant DPC functions and properties have to be managed in a way that a safe transport after the storage period of several decades is capable and can be justified and certified permanently throughout that period. The effects of aging mechanisms (e.g. radiation, different corrosion mechanisms, stress relaxation, creep, structural changes and degradation) on the transport package design safety assessment features have to be evaluated. Consideration of these issues in the DPC transport safety case will be addressed. Special attention is given to all cask components that cannot be directly inspected or changed without opening the cask cavity, like the inner parts of the closure system and the cask internals, like baskets or spent fuel assemblies. The design criteria of that transport safety case have to consider the operational impacts during storage. Aging is not the subject of technical aspects only but also of intellectual aspects, like changing standards, scientific/technical knowledge development and personal as well as institutional alterations. Those aspects are to be considered in the management system of license holders and in appropriate design approval update processes. The paper addresses issues that are subject of an actual International Atomic Energy Agency TECDOC draft 'Preparation of a safety case for a dual purpose cask containing spent nuclear fuel'.
When storage of spent nuclear fuel (SNF) or high-level waste (HLW) is done in dual purpose casks (DPC), the effects of aging on safety relevant DPC functions and properties have to be managed in a way that a safe transport after the storage period of several decades is capable, and can be justified and certified permanently throughout that period. The effects of aging mechanisms (like e.g. radiation, different corrosion mechanisms, stress relaxation, creep, structural changes and degradation) on the transport package design safety assessment features have to be evaluated. The consideration of these issues in the DPC transport safety case will be addressed. Special attention is given to all cask components which cannot be directly inspected or changed without opening the cask cavity, what are the inner parts of the closure system and the cask internals, like baskets or spent fuel assemblies. The design criteria of that transport safety case have to consider the operational impacts during storage. Aging is not subject of technical aspects only, but also of 'intellectual' aspects, like changing standards, scientific/ technical knowledge development and personal as well as institutional alterations. Those aspects are to be considered in the management system of the license holders and in appropriate design approval update processes. The paper addresses issues which are subject of an actual IAEA TECDOC draft 'Preparation of a safety case for a dual purpose cask containing spent nuclear fuel'.
The moisture content of wood is known to have a significant influence on the woods mechanical properties. Using wood as an energy absorber in impact limiter of packages for the transport of radioactive material, it is of particu-lar importance to ensure the moisture content and thus relevant mechanical properties to be in specified limits. The paper surveys the influence of wood moisture content on the mechanical properties of wood. Different measuring methods are discussed with respect to in-situ applicability, accuracy and effort. The results of an experimental ana-lysis of the accuracy of hand-held moisture meters using the electrical resistance method are discussed. Conclu-sions are drawn regarding the measurement of moisture content of wood upon delivery as well as of complete im-pact limiter assemblies. Requirements for quality surveillance during manufacturing of wood filled impact limiter are derived and it is exemplified how to meet them. Construction, manufacturing and inspection of impact limiter encapsulation with regard to leak-tightness are addressed.
The moisture content of wood is known to have a significant influence on the wood's mechanical properties. Using wood as an energy absorber in impact limiters of packages for the transport of radioactive material, it is of particular importance to ensure the moisture content and thus relevant mechanical properties to be in specified limits. The paper surveys the influence of wood moisture content on the mechanical properties of wood. Different measuring methods are discussed with respect to in situ applicability, accuracy and effort. The results of an experimental analysis of the accuracy of hand held moisture metres using the electrical resistance method are discussed. Conclusions are drawn regarding the measurement of moisture content of wood upon delivery as well as of complete impact limiter assemblies. Requirements for quality surveillance during manufacturing of wood filled impact limiters are derived and it is exemplified how to meet them. Construction, manufacturing and inspection of impact limiter encapsulation with regard to leak tightness are addressed.
BAM Federal Institute for Materials Research and Testing is the competent authority for mechanical safety assessment of transport packages for radioactive material in Germany. The further development of state-of-the-art technology concerning assessment methods is essential for a qualified work of involved designers and authority experts. The paper gives an example of current development done to improve understanding and modeling capabilities of wood filled impact limiter. In order to reduce the loads applied to the package containment, which result from regulatory drop tests, most packages are protected by energy dissipating impact limiter. Wood, encapsulated by steel sheets, is one of the materials typically used for energy dissipation in these impact limiter. Very often, mechanical safety cases regarding the 9 m drop test are performed computationally, where it is essential to use reliable and verified computational methods and models. In this context, the paper presents an approach for a finite element material model for wood. Thereby, the mechanical behavior of wood under compression loading is the focus of the development work. Additionally, material orientation as well as strain rate, temperature and lateral constraint may vary. A large number of experiments, particularly compression tests, was designed and performed to establish an adequate experimental database for modeling verification. The experimental results enabled the derivation of necessary requirements: The material model has to take into account strain rate and temperature dependencies as well as the anisotropic characteristics of the material, a proper yield criterion, flow rule and hardening law. Such a material model is currently not available in established commercial dynamic finite element codes. Thus it is necessary to create a user-defined material model considering the mentioned requirements. A first step was done by determining a yield surface as well as detecting flow and hardening mechanisms from experimental force-deflection curves. In a next step the LS-DYNA material model MAT_75 was altered according to conclusions of former BAM development work, regarding the modeling of post-peak softening as a function of lateral constraint. Future research will contain the further development, implementation and verification of a material model for wood.
Packages for the transport of SNF and HLW are usually equipped with impact limiters to reduce the loads that result from the regulatory 9 m drop test. A common impact limiter design in Germany is a welded steel sheet structure filled with wood. The material wood is the main energy absorber, while the steel sheet provides the integrity of the impact limiter. The IAEA allows mechanical safety cases of transport packages to be carried out computationally, as long as the models used are reliable. In this context, a Finite Element (FE) modeling approach for wood and its application to impact limiters in the calculation of a 9 m drop test is presented.
A user material model for wood was developed for the dynamic FE-Code LS-DYNA. Its features are based on a series of crush tests with spruce wood specimens. The model considers wood as a material with transversely isotropic properties, i.e. in the directions parallel and perpendicular to the fiber. The plastic material behavior depends on the state of stress. This has shown to be important to account for the lateral constraint of wood in impact limiters resulting from steel sheet encapsulation. Lateral constraint or respectively, a multiaxial stress state, increases the compression strength level of wood, limits the softening effect and increases the hardening effect. Lateral constraint also increases volumetric and reduces deviatoric deformation. The wood material model considers various hardening and softening characteristics via input flow curves. It considers effects of temperature and strain rate on strength as well. The development of a multi-surface yield criterion and a plastic potential that enables the user input of plastic Poisson's ratios were the challenges during the development of material model.
A dynamic FE calculation of a horizontal drop test with an 18,000 kg test package was performed. The wood material model was used to model the wooden impact limiter inlays. The impact limiter deformation and the package deceleration were compared to the experimental drop test results to rate the performance of the wood material model.
Accident safe packages for the transport of spent nuclear fuel and high-level waste shall fulfil international IAEA safety requirements. Compliance is shown by consecutive mechanical and thermal testing. Additional numerical analysis are usually part of the safety evaluation. For damage protection some package designs are equipped with wood filled impact limiters encapsulated by steel sheets. The safety of these packages is established in compliance with IAEA regulations. Cumulative mechanical and fire tests are conducted to achieve safety standards and to prevent loss of containment. Mechanical reliability is proven by drop tests. Drop testing might cause significant damage of the impact limiter steel sheets and might enable sufficient oxygen supply to the impact limiter during the fire test to ignite the wood filling. The boundary conditions of the fire test are precisely described in the IAEA regulatory. During the test the impact limiter will be subjected to a 30 minute enduring fire phase. Subsequent to the fire phase any burning of the specimen has to extinguish naturally and no artificial cooling is allowed. At BAM a large-scale fire test with a real size impact limiter and a wood volume of about 3m3 was conducted to investigate the burning behaviour of wood filled impact limiters in steel sheet encapsulation. The impact limiter was equipped with extensive temperature monitoring equipment. Until today burning of such impact limiters is not sufficiently considered in transport package design and more investigation is necessary to explore the consequences of the impacting fire. The objective of the large scale test was to find out whether a self-sustaining smouldering or even a flaming fire inside the impact limiter was initiated and what impact on the cask is resulting. The amount of energy, transferred from the impact limiter into the cask is of particular importance for the safety of heavy weight packages. With the intention of heat flux quantification a new approach was made and a test bench was designed.