Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (117)
- Zeitschriftenartikel (18)
- Vortrag (8)
- Buchkapitel (3)
- Posterpräsentation (3)
- Monografie (1)
- Beitrag zu einem Sammelband (1)
Sprache
- Englisch (151) (entfernen)
Schlagworte
- Transport (20)
- Impact limiter (17)
- Radioactive material (17)
- Transport packages (14)
- Fire test (11)
- Wood (10)
- IAEA (9)
- Numerical analysis (9)
- Package (9)
- Safety assessment (9)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (8)
Federal Institute for Materials Research and Testing (BAM) is the responsible authority for the
assessment of mechanical and thermal safety as well as quality issues within the licensing procedure
for transport casks for radioactive materials. The assessment includes a brittle fracture analysis of all
relevant cask components.
For cask bodies where a steel bottom is welded to a steel shell, specimens for testing of sufficient
fracture resistance can normally not be extracted directly from the welding seam area of the cask.
Therefore, a methodology has to be developed to ensure compliance with the safety analysis
considerations and the approved design specification. This paper describes such a methodology
including brittle fracture analysis and de-termination of required material properties as well as aspects
of quality assurance during manufacturing.
Transport packages for spent fuel have to meet the International Atomic Energy Agency requirements for different transport conditions. Physical state of spent fuel and fuel rod cladding as well as geometric configuration of fuel assemblies are important inputs for the evaluation of package capabilities under these conditions. In this paper, the mechanical behaviour of high burn-up spent fuel assemblies under transport conditions is analysed with regard to assumptions to be used in the activity release and criticality safety analysis. In particular the different failure modes of the fuel rods (fine cracks or complete breakage), which can cause release of gas, volatiles, fuel particles or fragments have to be properly considered in these assumptions. In view of the complexity of interactions between the fuel rods as well as between fuel assemblies, basket, and cask containment, the exact mechanical analysis of such phenomena is nearly impossible. The gaps in information concerning the material properties of cladding and pellets, especially for the high burn-up fuel, make the analysis more complicated additionally. In this context some practical approaches based on experiences of BAM Federal Institute for Material Research and Testing within safety assessment of packages for transport of spent fuel are discussed.
Methodological aspects for finite element modeling of lid systems for type B(U) transport packages
(2012)
The regulatory compliance of the containment system is of essential importance for the assessment
process of Type B(U) transport packages. The requirements of the IAEA safety standards for
transport conditions implies high loading on the containment system. The integrity of the
containment system has to be ensured in mechanical and thermal tests.
The containment system of German SNF and HLW transport packages usually includes bolted lids
with metal gaskets. The finite element (FE) method is recommended for the analysis of lid systems
according to the guideline BAM-GGR 012 for assessment of bolted lid and trunnion systems. FE
analyses provide more accurate and detailed information about loading and deformation of such
kind of structures. The results allow the strength assessment of the lid and bolts as well as the
evaluation of relative displacements between the lid and the cask body in the area of the gasket
groove.
This paper discusses aspects concerning FE simulation of lid systems for Type B(U) packages for
the transport of SNF and HLW. The work is based on the experiences of BAM Federal Institute for
Materials Research and Testing as the German competent authority for the mechanical design
assessment of such kind of packages. The issues considered include modeling strategies, analysis
techniques and the interpretation of results. A particular focus of this paper is on the evaluation of
the results with regard to FE accuracy, influence of the FE contact formulation and FE modeling
techniques to take the metallic gasket into account.