Filtern
Erscheinungsjahr
- 2012 (10) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (4)
- Beitrag zu einem Tagungsband (3)
- Vortrag (2)
- Sonstiges (1)
Schlagworte
- Acoustic emission (4)
- Beton (2)
- CIF- und CDF-Prüfung (2)
- Frost- und Frost-Tausalz-Prüfung (2)
- Photogrammetrie (2)
- Röntgen-3D-CT (2)
- Baustoffe (1)
- Brandschutz (1)
- Computed tomography (1)
- Computertomographie (1)
Eingeladener Vortrag
- nein (2)
This paper presents the results of an
experimental study on the transient strain of high
strength concrete (HSC) under heating up to 750 °C
and the impact of polypropylene (PP) fibers. Concerning
this topic only few results are available in the
literature and systematic investigations are missing.
However, basic knowledge is necessary for the
understanding of the internal damage processes in
the material as well as for heated structures. The
transient strain during heating can be separated in two
basic components: the free thermal strain and the
mechanical strain. They were experimentally determined
exemplarily for one HSC. For the determination
of the mechanisms of transient strain and particularly
the influence of PP fibers different techniques were
applied. In this context the monitoring of the microcracking
was done for the first time with acoustic
emission analysis in combination with ultrasonic
measurements. This new approach helps fundamentally
to explain the impact of PP fibers on free thermal
strain and mechanical strain during heating up.
Furthermore weight loss measurements were carried
out to characterize the moisture transport. It was
shown that the PP fibers cause an acceleration of the
moisture transport in the temperature range from 200
to 250 °C which leads to drying shrinkage in opposite
direction to the free thermal strain. Hence this paper is
a contribution to the general understanding of the
impact of PP fibers in HSC at high temperatures and
emphasizes the important influence of PP fibers on the
thermal and mechanical induced strain of HSC.
Bauteile bzw. Tragwerke aus Hochleistungsbetonen müssen in der Regel gegen brandinduzierte Abplatzungen mit geeigneten Maßnahmen geschützt werden, um einen ausreichenden Feuerwiderstand im Brandfall zu gewährleisten. Die bisher wirtschaftlich und technologisch sinnvollste Methode zur Verhinderung von explosionsartigen Betonabplatzungen im Brandfall ist die Zugabe von Polypropylen-Fasern. Die Wirksamkeit der Fasern konnte zwar empirisch gezeigt werden, es stellt sich allerdings die Frage, welche Mechanismen zur Verhinderung der Abplatzungen führen. Der vorliegende Beitrag fasst bisherige Theorien zur Wirkungsweise von Polypropylen-Fasern in brandbeanspruchten Hochleistungsbetonen zusammen und stellt eine innovative Methodologie zur Erforschung der mikrostrukturellen Prozesse vor. Die Ergebnisse zeigen, dass die nach dem Schmelzen und Zersetzen der Polypropylen-Fasern frei werdenden Mikrokanäle durch eine gleichzeitig einsetzende Mikrorissbildung netzartig verbunden werden. Die Mikrorissbildung ermöglicht somit den Abbau von Eigen- und Zwangsspannungen im Beton (mechanischer Effekt) und die Entstehung eines Transportwegesystems für den ausströmenden Wasserdampf (Permeationseffekt).--------------------------------------------------------------------------- Structural members and bearing structures of high performance concrete generally have to be protected against explosive spalling due to fire exposure to guarantee a sufficient fire resistance. Up to now, the economically and technologically most worthwhile method to prevent explosive spalling is the addition of polypropylene fibres. Though the effectiveness of the fibres could be shown empirically, the mechanisms preventing explosive spalling are still debatable. The present article summarizes the existing theories concerning the mode of action of polypropylene fibres in fire exposed high performance concretes and presents an innovative methodology for analysing the micro structural processes. The results show that due to the thermal decomposition of the polypropylene fibres micro channels are created and simultaneously connected due to a netlike micro crack formation. This enables the relief of internal stresses (mechanical effect) and the formation of a permeable transport system for the escaping water vapour (permeation effect).