Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (51)
- Vortrag (8)
- Posterpräsentation (6)
- Buchkapitel (2)
- Forschungsbericht (2)
Schlagworte
- GERG-2008 equation of state (6)
- Nanocomposite (6)
- Ionic liquid (5)
- Supercapacitor (5)
- Carbon dioxide (4)
- Density measurements (4)
- Equations of state (4)
- Ionic liquids (3)
- Mischphasenthermodynamik (3)
- Ringversuch (3)
- Density data (2)
- Equation of state (2)
- Gas analysis (2)
- Gas solubility (2)
- Graphene (2)
- Gravimetric preparation (2)
- Ionische Flüssigkeiten (2)
- NO2 (2)
- Perovskite (2)
- Photocatalyst (2)
- Reduced graphene oxide (2)
- Single-sinker densimeter (2)
- Speed of sound (2)
- Spurenverunreinigungen (2)
- Virial coefficients (2)
- Volumetric data (2)
- 1-Hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide (1)
- Acoustic resonance (1)
- Acoustic resonator (1)
- Acoustic virial coefficients (1)
- Adsorbent (1)
- Adsorption excess isotherm (1)
- Advanced Materials (1)
- Alkanol (1)
- Analysis (1)
- Anion (1)
- Antibacterial agent (1)
- Asymmetric supercapacitor (1)
- Atom transfer radical polymerization (1)
- Automotive gases (1)
- Binary gas mixture (1)
- Binary liquid mixture (1)
- Binary mixture (1)
- Binary mixtures (1)
- Binary mixtures CO2 + O2 (1)
- Biogas (1)
- Bioverfahrenstechnik (1)
- Block copolymer (1)
- C.I. disperse red 60 (1)
- CCQM (1)
- CCQM-K (1)
- CCQM-K101 (1)
- CO2 + n-alkanes (1)
- Caloric properties (1)
- Calorific value (1)
- Carbon nano-onion (1)
- Carbon nanotube (1)
- Cation (1)
- Certification (1)
- Chitosan (1)
- Chromatographische Analyse (1)
- Coal mine methane (1)
- Composite material (1)
- Copper hydroxide (1)
- Critical endpoints (1)
- Cryogenic state (1)
- Dampf/flüssig/flüssig-Gleichgewicht (1)
- Degradation (1)
- Density (1)
- Density measurement (1)
- Dissociation equilibrium (1)
- Dissoziationsgleichgewicht (1)
- Dye degradation (1)
- EURAMET.QM-K111 (1)
- Electrochemical behavior (1)
- Energy gases (1)
- Extraktion (1)
- FT-IR-Spektroskopie (1)
- Faseroptik (1)
- Fe3O4 (1)
- Fe3O4 nanoparticles (1)
- Gas calorimetry (1)
- Gas chromatography (1)
- Gas standards (1)
- Gasanalytik (1)
- Gasgualität (1)
- Gaslöslichkeit (1)
- Gaslöslichkeiten (1)
- Gasreinheit (1)
- Gassensorik (1)
- Graphene oxide (1)
- H2Safety@BAM (1)
- Heat capacity (1)
- Helium (1)
- Henry's law constant (1)
- High-pressure phase equilibria (1)
- High-pressure solubility (1)
- Historical Developments (1)
- Hydrogen (1)
- Hydrogen analysis (1)
- Hydrogen-containing gas mixture (1)
- Hydrogen-containing mixture (1)
- Hydrogen-containing mixtures (1)
- Hydrogen-containing natural gas (1)
- Hydrogen-enriched natural gas (1)
- Hydrophilic ionic liquid (1)
- Ionic Liquids (1)
- Ionische Fluide (1)
- Ionische Flüssigkeit (1)
- Liquefied natural gas-like mixtures (1)
- Methane (1)
- Metrologie (1)
- Metrology (1)
- Meßverfahren (1)
- Microwave (1)
- Multi-walled carbon nanotube (1)
- Nahekritisches Gas (1)
- Nanocluster (1)
- Nanohybrid (1)
- Nanospheres (1)
- Natural gas mixtures (1)
- Nearcritical gas (1)
- Ni-Co oxide (1)
- Nickel foam (1)
- Nitrogen (1)
- Non-conventional fuel gases (1)
- Normung (1)
- Nylon (1)
- Obituary (1)
- Ordered mesoporous solid (1)
- Oxidative polymerization (1)
- Perturbed-Chain Statistical Association Fluid Theory (1)
- Phase Equilibria (1)
- Phase equilibria (1)
- Phasengleichgewichte (1)
- Physical Chemistry (1)
- Poly(methyl methacrylate) (1)
- Polyester (1)
- Polystyrene (1)
- Propane in nitrogen (1)
- Purity analysis (1)
- Raffineriegas (1)
- Real samples (1)
- Regel- und Messtechnik (1)
- Room-temperature ionic lilquids (1)
- Salting-out behavior (1)
- Sampling (1)
- Simultaneous solubility of gases (1)
- Single sinker densimeter (1)
- Solid heterogeneity (1)
- Solubility (1)
- Solvation properties (1)
- Sorption (1)
- Speed-of-sound measurements (1)
- Supercritical carbon dioxide (1)
- Supercritical fluid dyeing (1)
- Ternary systems (1)
- Thermodynamic data (1)
- Thermodynamics (1)
- TiO2 nanoparticles (1)
- Transport properties (1)
- Ultraschall (1)
- Vapor-liquid-liquid equilibrium (1)
- Virial coefficient (1)
- Volumetric properties (1)
- Wastewater (1)
- Water content (1)
- Wirkstoffe (1)
- Zerstörungsfreie Prüfung (1)
- Zertifikat (1)
- Zinc ferrite (1)
- [bmim][PF6] and [hmim][Tf2N] (1)
- [hmim][Tf2N] (1)
- adsorption (1)
- carbon capture and storage (1)
- composite materials (1)
- equation of state (1)
- graphene oxide (1)
- microwave synthesis (1)
- nanoparticles (1)
- p-Phenylenediamine (1)
- photocatalysis (1)
- poly (2-hydroxyethyl methacrylate) (PHEMA) (1)
- single-sinker densimeter (1)
- thermophysical properties (1)
- zertifizierte Referenzmaterialien (1)
- Überkritische Fluide (1)
Organisationseinheit der BAM
- 1 Analytische Chemie; Referenzmaterialien (28)
- 1.4 Prozessanalytik (27)
- 1.0 Abteilungsleitung und andere (1)
- 5 Werkstofftechnik (1)
- 5.4 Multimateriale Fertigungsprozesse (1)
- 8 Zerstörungsfreie Prüfung (1)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (1)
- 8.4 Akustische und elektromagnetische Verfahren (1)
- 8.6 Faseroptische Sensorik (1)
Eingeladener Vortrag
- nein (8)
The solubility of a single gas as well as the simultaneous solubility of several gases in an ionic liquid is of great interest in many areas of chemical engineering, particularly in heterogeneous catalysis. One of the most interesting features involved in the study of the simultaneous solubility of several gases in a pure ionic liquid is the difference between experimental data and predictions for the simultaneous solubility (based on experimental data for the solubility of the single gases). The well soluble gas might act as a cosolvent or as an antisolvent for a sparsely soluble second gas. New experimental results and a correlation are presented for the simultaneous solubility of hydrogen (i.e., a sparsely soluble gas) and carbon dioxide (a well soluble gas) in the ionic liquid 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([hmim][Tf2N]) at temperatures between 293 K and 373 K and pressures up to about 9.2 MPa. The experimental results reveal that carbon dioxide acts as a cosolvent for hydrogen in that particular ionic liquid. A correlation shows that the cosolvency effect can be modeled by considering interaction parameters between hydrogen and carbon dioxide in liquid [hmim][Tf2N]. The correlation can also be used to quantify that cosolvency effect: one mole of carbon dioxide in 1000 g of [hmim][Tf2N] increases the solubility of (small amounts of) hydrogen by about 20%.
Poly(p-phenylenediamine) (PpPD)/carboxylic acid-functionalized multiwalled carbon nanotubes (c-MWCNTs) nanocomposites were prepared by chemical oxidative polymerization using potassium persulfate (K2S2O8) as an oxidant. Field-emission scanning electron microscopy (FE–SEM) and field-emission Transmission electron microscopy (FE–TEM) showed that a tubular layer of PpPD was coated on the surface of carbon nanotubes with a thickness of 10–20 nm. FT–IR analysis provided an evidence for the formation of nanocomposites. The thermal stability of nanocomposites was improved by addition of c-MWCNTs as confirmed by thermogravimetric analysis (TGA). XRD spectra showed that the crystalline nature of PpPD was not affected much by the addition of c-MWCNTs. As the content of c-MWCNTs was increased, the electrical conductivity of the nanocomposites increased due to the interaction between polymer and nanotubes that enhances electron delocalization.
Experimental results are reported for the solubility of carbon dioxide in liquid mixtures of water and the ionic liquid 1-n-butyl-3-methylimidazolium methylsulfate ([bmim][CH3SO4]). Three (gas-free) solvent compositions were considered with mass fractions of [bmim][CH3SO4] of w' ≈ 0.15, 0.50, and 0.87 (mole fractions x' ≈ 0.013, 0.066, and 0.33). In the isothermal experimental series, the temperature was about (293, 333, and 373) K. The total pressure ranged up to about 10 MPa. The molality of carbon dioxide in the solvent mixture of (water + [bmim][CH3SO4]) (the mole fraction of carbon dioxide in the liquid) ranged up to approximately 1.64 mol·kg1 (about 0.0332). The experimental results are used to determine Henry's constant of carbon dioxide in the liquid mixtures of (water + [bmim][CH3SO4]) as well as the partial molar volume of that gas at infinite dilution in those solvent mixtures. The phase equilibrium is described by applying an extension (to solvent mixtures) of Pitzer's molality scale-based equation for the Gibbs excess energy.
Adding some salt to a homogeneous aqueous liquid solution of an organic solvent often results in a liquid–liquid phase split. However, such a phase split can also be achieved by charging such a liquid with a gas, in particular when the temperature is close to the critical temperature of that specific gas. This phenomenon is called 'salting out by a near-critical gas'. It might be applied in a high-pressure extraction process, for example, to separate and recover valuable biomolecules from aqueous phases. Using a neutral gas like, for example, ethene for pressurizing additionally allows to adjust the pH of the coexisting liquid phases and to influence the partitioning of biomolecules when they change their electric net charge with the pH of the solution. The design of such separation processes requires not only reliable information on the phase forming system, that is, the ternary system (near-critical gas + water + organic solvent), but also on the partitioning of typical solutes to the coexisting phases. The present publication reports data (from an experimental study with a static-analytical device) for the partitioning of four biomolecules, that is, L-histidine, Aspirin, cimetidine, and 4-dimethylaminoantipyrine (at nearly infinite dilution) to coexisting liquid phases of the high-pressure three-phase liquid–liquid–vapor (L1L2V) equilibrium of the ternary system (ethene + water + 2-propanol) at (293 and 333) K and pressures from about (5.5 to 17) MPa. The coexisting liquid phases are characterized by distinctly different compositions, the aqueous phase being more hydrophilic than the alkanol-rich phase. Moreover, electrolytes were additionally added to adjust the pH conditions in the liquid phases. The pH-dependent dissociation equilibrium and the related net charge of the biomolecules primarily determine the partitioning behavior: The pH effect is stronger than the impact of varying pressure or temperature. For example, a switch from basic to acidic conditions can invert the partitioning, if that switch at the same time effects a change in the net charge of the solute, for example, from an ionic to a neutral molecule (or vice versa). The ionic solute is more hydrophilic (and thus prefers the aqueous phase), whereas the neutral or zwitterionic solute is less hydrophilic (i.e., more lipophilic) and consequently prefers the propanol-rich liquid phase.
There is a high international priority attached to activities which reduce NOx in the atmosphere. The current level of permitted emissions is typically between 50 µmol/mol and 100 µmol/mol, but lower values are expected in the future. Currently, ambient air quality monitoring regulations also require the measurement of NOx mole fractions as low as 0.2 µmol/mol. The production of accurate standards at these levels of mole fractions requires either dilution of a stable higher concentration gas standard or production by a dynamic technique, for example one based on permeation tubes.
The CCQM-K74 key comparison was designed to evaluate the level of comparability of National Metrology Institutes' measurement capabilities and standards for nitrogen dioxide (NO2) at a nominal mole fraction of 10 µmol/mol.
The measurements of this key comparison took place from June 2009 to May 2010.
Seventeen laboratories took part in this comparison coordinated by the BIPM and VSL. The key comparison reference value was based on BIPM measurement results, and the standard measurement uncertainty of the reference value was 0.042 µmol/mol.
This key comparison demonstrated that the results of the majority of the participants agreed within limits of ±3% relative to the reference value. The results of only one laboratory lay significantly outside these limits. Likewise this comparison made clear that a full interpretation of the results of the comparison needed to take into account the presence of nitric acid (in the range 100 nmol/mol to 350 nmol/mol) in the cylinders circulated as part of the comparison, as well as the possible presence of nitric acid in the primary standards used by participating laboratories.
Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.
The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).
DatesIssue 1A (Technical Supplement 2012)
This pilot study compares the performance of participants in analyzing gas mixtures of nitrogen dioxide in nitrogen by comparison with in-house gravimetric standards using Fourier transformed infrared spectroscopy (FT-IR). In this study the same gas mixtures were used as in the key comparison CCQM-K74, which was designed to evaluate the level of comparability of National Metrology Institutes' measurement capabilities for nitrogen dioxide (NO2) at a nominal mole fraction of 10 µmol/mol. In the comparison CCQM-K74 most of the participants used chemiluminescence, with a small number using UV absorption or FT-IR spectroscopy, and thus it is of interest to improve understanding of the comparative performance of these techniques because they do not exhibit any cross-sensitivity to nitric acid (HNO3), which was known to be present in the mixtures used for the comparison.
The results of this pilot study indicate good consistency and a level of agreement similar to that reported in the comparison CCQM-K74, demonstrating that FT-IR can be operated as a comparison method when calibrated with appropriate gas standards and can achieve similar measurement uncertainties to chemiluminescence and UV absorption techniques.
An additional pilot study, CCQM-P110-B2, was conducted on the same gas mixtures in parallel with this pilot study. The second study addressed FT-IR spectroscopy when used to measure the gas mixtures with respect to reference spectra. The results of this second study will be reported elsewhere.
Main text. To reach the main text of this paper, click on Final Report.
The final report has been peer-reviewed and approved for publication by the CCQM-GAWG.
DatesIssue 1A (Technical Supplement 2012)
Untersuchungen zur gasinduzierten Phasentrennung bzw. zum Aussalzen mit nahekritischen Gasen wurden an verschiedenen wässrigen Lösungen (auch mit ionischem Fluid) durchgeführt. Ziel war der Nachweis und die Charakterisierung von Hochdruckmehrphasengleichgewichten, die sich für eine technische Anwendung eignen. Kriterien hierfür sind Auftreten des Flüssig/flüssig-Phasenzerfalls bei relativ niedrigem Druck, seine Existenz über einen weiten Druck- und Zusammensetzungsbereich und damit verbunden eine druckinduzierte Änderung der Zusammensetzung der koexistierenden Flüssigphasen. Die eingesetzten ionischen Fluide zeigen zwar das gewünschte Phasenverhalten, erfüllen die Kriterien aber nur teilweise. Im Vorgriff auf eine mögliche Anwendung wurde die Verteilung eines hochmolekularen, amphiprotischen Naturstoffs auf die koexistierenden Flüssigphasen untersucht und durch Einstellung des pH-Werts gezielt verändert. -------------------------------------------------------------------------------------------------------------------------------------
Investigations on gas-induced phase split, i.e., salting out by a nearcritical gas, were carried out for several aqueous solutions (including an ionic liquid). The research aimed to verify and characterize high-pressure multiphase equilibria that might be suitable for technical applications. The respective criteria are occurrence at relatively low pressures and the existence of the phase equilibrium phenomenon over a significant region of both composition and pressure, which is related to a pressure-induced significant alteration of the compositions of the coexisting liquid phases. The employed ionic liquids revealed the expected phase behavior but without full compliance of all criteria. In anticipation of an application, the partitioning of an amphiprotic, high-molecular biomolecule to the coexisting liquid phases was successfully administered via a pH variation.
Refinery gas is a complex mixture of hydrocarbons and non-combustible gases (e.g., carbon monoxide, carbon dioxide, nitrogen, helium). It is obtained as part of the refining and conversion of crude oil. This key comparison aims to evaluate the measurement capabilities for these types of mixtures. The results of the key comparison indicate that the analysis of a refinery-type gas mixture is for some laboratories a challenge. Overall, four laboratories (VSL, NIM, NPL and VNIIM) have satisfactory results. The results of some participants highlight some non-trivial issues, such as appropriate separation between saturated and unsaturated hydrocarbons, and issues with the measurement of nitrogen, hydrogen and helium.
Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.
The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).
DatesIssue 1A (Technical Supplement 2012)