Filtern
Dokumenttyp
Sprache
- Englisch (3)
- Deutsch (1)
- Mehrsprachig (1)
Referierte Publikation
- ja (5) (entfernen)
Schlagworte
Organisationseinheit der BAM
Die Gefährdung durch Pipelines ist in der Öffentlichkeit wegen zahlreicher Berichte über Unfälle weitgehend präsent. Warum? Weil jeder Unfall die Gefahr von massiven Umweltschäden mit sich bringt und bei Leitungen, die durch besiedeltes Gebiet führen, sogar mit menschlichen Opfern verbunden sein kann. Thema dieses Beitrags ist ein neuartiges Ultraschall-Verfahren, das eine schnellere, sichere und kostengünstigere Prüfung derartiger Rohrleitungssysteme erlaubt.
The spatial resolution in ultrasonic testing as a wave phenomenon in nature is limited to a
certain fraction of the wavelength, usually defined to be close to the Rayleigh criterion. In case of
complicated reflector surfaces – such as stress corrosion cracking - this limitation prevents an exact
visualization of the defect shape. There exist a few approaches to improve the spatial resolution, whose
reconstruction quality all in common also depend on the achieved signal-to-noise ratio of the raw data. In this
work we present a specific SAFT analysis, in which a high number of different angles of incidence produce a
sufficiently high number of different reflections at the crack edges resulting in an improved SNR. In doing
so, we reconstruct a coherent crack structure. First investigations were made at artificially simulated crack
configurations with different contours and curvatures in flat and cylindrical test blocks. The measurements
results visualized by representative scans – show details of crack design and crack orientation. We also will
present a comparison of the SAFT analysis between modelling and phased array measurements.
Quantitative NDE methods play a key role when it comes to inspect components,
which requires high operational safety. UT-SAFT is one of the well-known reconstruction tools,
which provides information about the defect size. In this work we studied the use of phased array
technique in combination with the SAFT algorithm to inspect power plant components. As a first
example we inspected a real-sized mock-up model representing a part of a reactor pressure vessel with
a 180 mm-thick ferritic base material followed by a 6 mm-thick austenitic cladding layer. The phased
array probe was coupled at the outer ferritic surface. We detected and sized fatigue cracks within the
cladding with a depth ranging from 4 mm to 10 mm. Secondly, we investigated a mock-up model
resembling a nozzle including a thermo sleeve inlet and a maximum wall thickness of about 37 mm.
Artificially inserted notches with a depth of 3 mm could be detected and sized, where the thermo
sleeve is welded at the inside of the nozzle.
Die Zahl der industriellen Anwendungen mit Einsatz von Faserverbundwerkstoffen wächst kontinuierlich vor allem wegen der exzellenten Materialeigenschaften und des geringen Gewichtes dieses Werkstoffes. Entsprechend steigen die Anforderungen an zerstörungsfreie Prüfsysteme zur Gewährleistung des sicheren Betriebes von Komponenten und Strukturen bestehend aus Verbundwerkstoffen.
Im Rahmen des EU-Projekes VITCEA (Validated Inspection Techniques for Composites in Energy Applications) wird das Ziel verfolgt, neue Prüfverfahren für moderne Verbundwerkstoffe zu entwickeln und zu validieren. Im Vordergrund steht hierbei als Applikation im Industriesektor Energieversorgung die Prüfung von sicherheitsrelevanten Komponenten von onshore und offshore Windkraftanlagen, wie z.B. deren Rotorblätter und tragende Strukturen.
Eine Teilaufgabe innerhalb des Projektes stellen der Vergleich und die Validierung verschiedener Ultraschallprüfmethoden bezüglich ihrer Fähigkeit zum Nachweis der typischen Herstellungs- und betriebsbedingten Materialschädigungen von CFK und GFK dar.
Neben verschiedenen konventionellen Ultraschall-Prüftechniken, werden die Phased-Array-Prüfung, insbesondere die Prüfung mit Matrixarrays, sowie die Untersuchung mit berührüngsloser Luftultraschalltechnik bezüglich ihrer Nachweisgrenzen und der Möglichkeiten zur Fehlercharakterisierung an Faserverbundwerkstoffen untersucht. Die Ergebnisse werden mit Untersuchungen mit thermographischen Methoden und Mikrowellentechnik verglichen.
Hollow axle inspection can be performed without demounting the axles and without dismantling the wheels and the brake discs by using the drilling for the scan. To increase inspection reliability and inspection speed, the application of phased array systems instead of conventional probes is a good choice. For solid shaft inspection phased array setups became standard in the recent years. Nevertheless, for hollow axle inspection typically a number of conventional probes rotating through the axles drilling are applied.
The new approach uses an electronically steered rotating sound field from a phased array for the circumferential scan. This is realized by a cone shaped phased array which operates in immersion technique. That allows a significant increase in inspection speed and a reduction of the mechanical effort of the inspection system. The inspection can be carried out by a linear movement of the probe setup along the axles drilling. Applying additional focal laws allows exact inclination and focusing of the sound beam in the plane vertical to the specimen axis to concentrate the sound in the zones close to the external surface. An additional focus in the plane of incidence increases overall resolution and sensitivity.
The cone type phased array probe has been optimized to detect transversal flaws in and close to the outer surface of the hollow axle with orientation in the radial-radial plane. The prototype probe system, sound field simulations and measurement results are presented.