Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- Elutionsverfahren (3)
- Biomaterial (2)
- Bone (2)
- EDX (2)
- Kontaminierter Boden (2)
- MKW (2)
- PAK (2)
- PCB (2)
- Phenole (2)
- 3D analysis (1)
Organisationseinheit der BAM
This contribution summarizes actual developments and draft fundamental teaching topics in the field of nondestructive testing in civil engineering (NDT-CE). It is based on the first memorandum on teaching and research in the field of NDT-CE at German speaking universities and provides an overview of the academic education and highlights possible focuses, especially in teaching but also takes into account noteworthy developments and topics in research in the field of NDT-CE.
Suggestions are given for the development and advancement of the teaching curricula in regards to a comprehensive and sound professional education of students in civil engineering and adjacent disciplines.
Polycapillary halflenses are widely used to focus X-ray radiation onto a small spot. Additionally they can reduce the field of view of a semiconductor detector when placed in front of one. In 3D micro X-ray fluorescence spectroscopy (3D Micro-XRF) with synchrotron radiation, two polycapillary halflenses are used in a confocal geometry. Up until now, characterization measurements in the focal plane have only been performed in the case of the lens focusing parallel radiation. Assumptions have been made, that in the other case, when isotropic radiation from a spot source is transported to a detector, the acceptance distribution in the focal plane is also Gaussian. We performed measurements with an electron beam as well as a proton beam which confirm this assumption. In addition, a comparison between measurements in collecting and focusing mode show differences in spot size and transmission. These differences exemplify the fact that there is not one global spot size or transmission function of a polycapillary halflens. Illumination and divergence effects can alter both characteristic lens parameters.
To date, there are very few technologies available for the conversion of low-temperature waste heat into electricity. Thermomagnetic generators are one approach proposed more than a century ago. Such devices are based on a cyclic change of magnetization with temperature. This switches a magnetic flux and, according to Faraday’s law, induces a voltage. Here we demonstrate that guiding the magnetic flux with an appropriate topology of the magnetic circuit improves the performance of thermomagnetic generators by orders of magnitude. Through a combination of experiments and simulations, we show that a pretzel-like topology results in a sign reversal of the magnetic flux. This avoids the drawbacks of previous designs, namely, magnetic stray fields, hysteresis and complex geometries of the thermomagnetic material. Our demonstrator, which is based on magnetocaloric plates, illustrates that this solid-state energy conversion technology presents a key step towards becoming competitive with thermoelectrics for energy harvesting near room temperature.
The functional expression of human bone derived cells grown on resorbable bioactive glass ceramics
(2002)
Bioactive ceramics used as coating materials combine the conductive properties of a bioceramic with the mechanical stability of the metal implant. We studied a calcium zirconium phosphate-containing coating material, FA-CZP [Ca5(PO4)3F, CaZr4(PO4)6], that is relatively insoluble in the biological milieu. The reaction of bone to this material was investigated histologically and histomorphometrically in an animal trial. Cylindrical Ti6Al4V specimens that had been coated with FA-CZP by plasma spraying were implanted in the femoral condyles of rabbits. The implants were left in place for 2, 4, 6, 12, and 14 weeks. FA-CZP led to impaired mineralization of the newly formed bone at the interface. Noncalcified osteoid was found throughout the whole study period. The layer seemed to become thicker with time. The mineralization disorder is evidently caused by zirconium ions. The presence of zirconium in the osteoid in contact with the implant was demonstrated by means of two different staining methods.
In activation analysis of traces in small samples, the non-equivalence of the activating radiation doses of sample and calibration material gives rise to sometimes tolerable systematic errors. Conversely, analysis of major components usually demands high trueness and precision. To meet this, beam geometry activation analysis (BEAMGAA) procedures have been developed for instrumental photon (IPAA) and neutron activation analysis (INAA) in which the activating neutron/photon beam exhibits broad, flat-topped characteristics. This results in a very low lateral activating flux gradient compared to known radiation facilities, however, at significantly lower flux density. The axial flux gradient can be accounted for by a monitor-sample-monitor assembly. As a first approach, major components were determined in high purity substances as well as selenium in a cattle fodder additive.
Ziel des Vorhabens ist es, die Robustheit des Schüttelverfahrens nach E DIN 19527 mit einem Wasser-/Feststoffverhältnis von 2 l/kg für unterschiedliche Bodenarten und Bodenmaterialien zu überprüfen. Gleichzeitig soll bei diesen Untersuchungen das Stoffspektrum auf weitere prioritäre organische Kontaminanten erweitert werden. Dies stellt die Voraussetzung für die Durchführung von Ringversuchen zur Validierung der Norm DIN 19527 dar.
Osteoclastic bioresorption of biomaterials: Two- and three-dimensional imaging and quantification
(2010)
Purpose: Bioresorbable materials have been developed in the hope that the body will replace them with newly formed tissue. The first step of this remodeling process in bone is the bioresorption of the material by osteoclasts. The aim of this study was to analyze osteoclastic resorption of biomaterials in vitro using the commonly used two-dimensional methods of light-microscopy (LM) and scanning electron microscopy (SEM) in comparison with infinite focus microscopy (IFM), a recently developed imaging method allowing for three-dimensional surface analysis. Methods: Human hematopoietic stem cells were cultivated in the presence of the cytokines M-CSF and RANK-L for 4 weeks directly on dentin and a calcium phosphate cement. Osteoclast development was surveyed with standard techniques. After removal of the cells, resorption was characterized and quantified by LM, SEM and IFM. Results: Osteoclast cultures on the biomaterials presented the typical osteoclast-specific markers. On dentin samples LM, SEM as well as IFM allowed for discrimination of resorption. Quantification of the resorbed area showed a linear correlation between the results (LM vs. SEM: r=0.996, p=0.004; SEM vs. IFM: r=0.989, p=0.011; IFM vs. LM: r=0.995). It was not possible to demarcate resorption pits on GB14 using LM or SEM. With IFM, resorption on GB14 could be visualized and quantified two- and three-dimensionally.
Commonly, to determine osteoclastic resorption of biomaterials only the resorbed area is measured. The depth of the resorption pit, however, may also be important for the performance of a material. To generate such data we used two calcium phosphate ceramics (Ca10 and Ca2). The solubility of the materials was determined according to DIN EN ISO 10993-14. They were scanned three-dimensionally using infinite focus microscopy and subsequently cultivated for 4 weeks in simulated body fluid without (control) or with human osteoclasts. After this cultivation period osteoclasts number was determined and surface changes were evaluated two- and three-dimensionally. Ca10 and Ca2 showed solubilities of 11.0 ± 0.5 and 23.0 ± 2.2 mg g-1, respectively. Both materials induced a significant increase in osteoclast number. While Ca10 did not show osteoclastic resorption, Ca2 showed an increased pit area and pit volume due to osteoclastic action. This was caused by an increased average pit depth and an increased number of pits, while the average area of single pits did not change significantly. The deduced volumetric osteoclastic resorption rate (vORR) of Ca2 (0.010.02 µm3 µm-2 day-1) was lower than the remodelling speed observed in vivo (0.08 µm3 µm-2 day-1), which is in line with the observation that implanted resorbable materials remain in the body longer than originally expected. Determination of volumetric indices of osteoclastic resorption might be valuable in obtaining additional information about cellular resorption of bone substitute materials. This may help facilitate the development of novel materials for bone substitution.
Für die vom Bundesumweltministerium vorgesehene Mantelverordnung sind validierte Unter-suchungsmethoden erforderlich. Dazu gehört auch die Herstellung von wässrigen Eluaten, z.B. zur Beurteilung der Mobilität von Schadstoffen und der Ableitung von Grenzwerten.
Ziel des Vorhabens war es, auf der Grundlage geeigneter Testmaterialien (mit prioritären organischen Schadstoffen kontaminierte Böden und Bodenmaterialien) Ringversuche zur Validierung des Schüttelverfahrens nach E DIN 19527 und des Säulenverfahrens für die Übereinstimmungs-untersuchung nach DIN 19528 durchzuführen. Auf der Grundlage der Untersuchungsergebnisse sollten beide Normen bezüglich der Vorgehensweise präzisiert werden und es sollten die während des Ringversuchs ermittelten Verfahrenskenndatenn zur Validierung der Normen herangezogen werden. Darüber hinaus sollten Säulen- und Schüttelverfahren als Übereinstimmungstest vergleichend bewertet werden.
Es wurden vier geeignete Ringversuchsmaterialien hergestellt und an insgesamt 18 Ringversuchsteilnehmer ausgegeben. Die Auswertung der Ringversuche erfolgte auf der Grundlage klassischer Statistik nach DIN ISO 5725 mit Hilfe der AuswertesoftwareProLab 2011 (quo data).
Auf der Grundlage der Validierungsringversuche wurden die Verfahrenskenndaten für die Norm DIN 19527 ermittelt. Die statistische Auswertung der eingereichten Datensätze war aufgrund der großen Streubreite der Daten schwierig. Die vorgeschriebenen statistischen Methoden zur Datenauswertung adressieren die Behandlung nicht gleichverteilter Datensätze nur ungenügend. Das muss bei der Bewertung der Ergebnisse und deren Zuverlässigkeit berücksichtigt werden.
Generell kann festgestellt werden, dass keine signifikanten Unterschiede zwischen den Ergebnissen der Schüttel- und Säulenelution beobachtet werden. Dabei werden beim Schüttelverfahren tendenziell etwas geringere Gesamtmittelwerte erzielt als beim Säulenverfahren, die berechneten Vergleichsvariationskoeffizienten sind für das Schüttelverfahren meist etwas niedriger. Dennoch erweisen sich beide Elutionsverfahren bei den eingesetzten Ringversuchsmaterialien als gut vergleichbar.
One of the crucial characteristics of functionalized thin films is their porosity (i.e., the ratio between the pore volume and the volume of the whole film). Due to the very low amount of material per coated area corresponding to thin films, it is a challenge for analytics to measure the film porosity. In this work, we present an Approach to determine the porosity of thin films by means of electron probe microanalysis (EPMA) either by wavelength-dispersive X-ray spectrometry (WDX) or by energy-dispersive X-ray spectrometry (EDX) with a scanning electron microscope (SEM). The procedure is based on the calculation of the film mass deposition from electron-excited X-ray spectra. The
mass deposition is converted into film density by division of measured film thickness.
Finally, the film porosity is calculated from the measured film density and the density of bulk, nonporous film material. The general applicability of the procedure to determine the
porosity is demonstrated on thin templated mesoporous TiO₂
films, dip-coated on silicon
wafer, with controlled porosity in the range of 15 to 50%. The high accuracy of the mass deposition as determined from X-ray spectra was validated with independent methods (ICP-OES and weighing). Furthermore, for the validation of the porosity results, ellipsometry, interference fringes method (IFM), and focused ion beam (FIB) cross sectioning were employed as independent techniques. Hence, the approach proposed
in the present study is proven to be suited as a new analytical tool for accurate and relatively fast determination of the porosity of thin films.