Filtern
Dokumenttyp
Referierte Publikation
- ja (18) (entfernen)
Schlagworte
- POD (9)
- Human factors (6)
- NDT reliability (3)
- Bayesian approach (2)
- NDE reliability (2)
- NDT (2)
- Open space technology (2)
- Radiography (2)
- Reliability (2)
- Structural health monitoring (2)
- Zuverlässigkeit (2)
- Bayes'sches updating (1)
- Copper (1)
- Corrosion resistance (1)
- Eddy current testing (1)
- Endlagerung radioaktiver Abfälle (1)
- Heat treatment (1)
- In-service inspection (1)
- Legal regulations (1)
- Manual ultrasonic testing (1)
- Martensitic stainless steels (1)
- Modulares Modell (1)
- NDT practice (1)
- Nondestructive testing (1)
- Nuclear (1)
- Nuclear power plants (1)
- Nuclear waste (1)
- Phased array (1)
- Phased array ultrasonic testing (1)
- Probability (1)
- Probability of Detection (POD) (1)
- Probability of detection (1)
- Product liability (1)
- RT (1)
- Service inspection companies (1)
- TRL-UT (1)
- Time pressure (1)
- Ultrasonic (1)
- Ultrasonic testing (1)
- Ultrasonics (1)
- Visual testing (1)
- Zerstörungsfreie Prüfung (1)
Since the beginnings of the European American Workshops (EAW) in 1997, the aim was to gather the experts in NDE reliability and discuss burning topics with the aim of identifying crucial problems and suggesting ways to move forward. This was usually achieved during the so-called break-out sessions, in which predetermined topics were discussed. During the 5th EAW, held in Berlin in 2013, this approach was replaced by an Open Space Technology (OST) approach. The benefit of this approach is seen in the freedom of topic choices, i. e., the topics are not predetermined but rather arise at that moment in that space and by the participants choice. The following topics arose: new reliability methods (Bayesian, MAPOD,
), structural health monitoring, definition of requirements of NDE by customer versus provider, what value of POD is good enough?, human factors, manual versus automated inspection, and basic concepts of reliability of NDE. The participants were encouraged to walk from one session to another and openly express their opinions. These were in the end summarized by a chosen group of moderators and presented in this paper.
Der Artikel beschreibt eine arbeitspsychologische Analyse des Einflusses der menschlichen Faktoren auf die Zuverlässigkeit zerstörungsfreier Prüfungen (ZfP). Im Zeitraum von 5 Jahren wurde eine Serie von Untersuchungen zur wiederkehrenden Prüfung in Kernkraftwerken sowie zur Prüfung von Komponenten für die Endlagerung von radioaktivem Abfall durchgeführt. Dieser Beitrag gibt einen Überblick über vier Studien, diskutiert ausgewählte experimentelle Ergebnisse, und schlägt sich daraus ergebende Möglichkeiten zur Optimierung des ZfP-Verfahrens, der Prüfanweisung sowie zur Schulung des Personals vor. Die experimentellen Ergebnisse haben gezeigt, dass sowohl hoher Zeitdruck als auch hohe psychische Arbeitsbeanspruchung die Qualität des Prüfungsergebnisses negativ beeinflussen. Auffällig waren die Einflüsse der Einteilung des Arbeitsplans, der Kommunikation, der Prüfanweisung, der Prüfaufsicht sowie der Demonstrationsübung. Die abgewandelte Fehlermöglichkeits- und Einflussanalyse (Failure Mode and Effects Analysis FMEA) wurde zur Identifizierung potentieller menschlicher Risiken während der Datenaufnahme und deren Auswertung benutzt. Darauf basierend werden verschiedene Präventivmaßnahmen, wie z.B. menschliche Redundanz und Automatisierung vorgeschlagen, sowie sich daraus möglicherweise ergebende Probleme diskutiert. Die experimentellen Ergebnisse haben gezeigt, dass menschliche Redundanz bei kritischen Anwendungen, wie beispielweise der Fehleridentifizierung, zu anderen Fehlerquellen führen kann, wie sozialem Faulenzen bei den Prüfern. Die Verwendung automatisierter softwarebasierter Entscheidungshilfen zur Fehlererkennung bzw. Fehlergrößenbestimmung kann zu übersteigertem Vertrauen in das automatisierte System (automation bias) durch die Prüfer und somit zu Fehlentscheidungen führen. Dadurch kann die Zuverlässigkeit der Prüfung in ungewollter Weise beeinflusst werden. Um die Zuverlässigkeit und Sicherheit der technischen Prozesse zu gewährleisten ist es wichtig, als Hauptfehlerquelle nicht mehr nur das einzelne Individuum zu sehen, sondern ebenfalls die Organisation zu berücksichtigen.
The human factors approach relies on understanding the properties of human capability and limitations under various conditions and the application of that knowledge in designing and developing safe systems. Following the principles of the MTO (Man Technology Organisation) approach, emphasis should be given to the way people interact with technical as well as organisational systems.
A model describing human factor influences in relation to the performance shaping factors and their effect on manual ultrasonic inspection performance had been built and a part of it empirically tested. The experimental task involved repeated inspection of 18 defects according to the standard procedure under no, middle and high time pressure. Stress coping strategies, the mental workload of the task, stress reaction and organisational factors have been measured. The results have shown that time pressure, mental workload and experience influence the quality of the inspection performance. Organisational factors and their influence on the inspection results were rated as important by the operators. However, further research is necessary into the effects of stress.
For inspection of thick-walled (50mm) copper canisters for final disposal of spent nuclear fuel in Sweden, ultrasonic inspection using phased array technique (PAUT) is applied. Because thick-walled copper is not commonly used as a structural material, previous experience on Phased Array Ultrasonic Testing for this type of application is limited. The paper presents the progress in understanding the amplitudes and attenuation changes acting on the Phased Array Ultrasonic Testing inspection of copper canisters. Previous studies showed the existence of a low pass filtering effect and a heterogeneous grain size distribution along the depth, thus affecting both the detectability of defects and their "Probability of Detection" determination. Consequently, the difference between the first and second back wall echoes were not sufficient to determine the local attenuation (within the inspection range), which affects the signal response for each individual defect. Experimental evaluation of structural attenuation was carried out onto step-wedge samples cut from full-size, extruded and pierced&drawn, copper canisters. Effective attenuation values has been implemented in numerical simulations to achieve a Multi Parameter Probability of Detection and to formulate a Model Assisted Probability of Detection through a Monte-Carlo extraction model.
The focus of NDT reliability research in the past was in the field of two high risk industries: (atomic) power plants and aircrafts. The responsible organizations have been well aware of the risks and founded projects to understand and optimize critical steps during production, operation and maintenance. But the use of NDT is not limited to these two fields. The risks during operation of chemical plants, trains or windmills are different from the area above but evident. The coverage by legal regulations is relatively low. Instead of this owner responsibility, product liability and financial issues are the driving forces to do inspections and to use non-destructive testing. The different targets and financial issues influence the practice of NDT-inspections. A survey of this practice and its results are shown.
How much information do we need? A reflection of the correct use of real defects in POD-evaluations
(2016)
To evaluate the capability of a non destructive testing system the “truth” of the used defects is essential. But what exactly is the truth of a real defect? And how much information is usable for the study? This presentation gives an overview about an advanced use of multiple metallographic cuts for the POD evaluation. In the presentation an approach is shown where information of metallographic studies are reconstructed and weighted to gain the essential information about real defects and which information are important for the detection with radiographic testing equipment. Furthermore, different connection points are discussed were additional knowledge from simulation and artificial defects can be used to gain additional certainty for the result of the evaluation. The methodology is used for the evaluation for the digital radiographic testing system for the testing of electron-beam welds, which is one possible choice to seal the Finnish copper canisters for the final deposit of spent nuclear fuel.
Die Fehlerauffindwahrscheinlichkeit oder 'Probability of Detection' ist zu einer wichtigen Qualitätskennzahl von zerstörungsfreien Prüfsystemen geworden. Die Einschätzung von nur künstlichen Fehlern ist jedoch als Bewertungsgrundlage meist nicht ausreichend. Die später verwendeten Prüfobjekte mit den real vorkommenden Fehlern sind die zu betrachtende Basis, für die der Endanwender eine gültige Qualitätseinschätzung der angewandten zerstörungsfreien Prüfung fordert. Jedoch ist bei dem Fall, dass die Datenmenge gering ist, auch die Aussage der POD beschränkt. Es muss daher eine Zwischenlösung gefunden werden, in der die Informationen von beiden Prüfungen kombiniert werden. Die Mathematik ermöglicht mit der Bayes'schen Statistik, diese Informationen miteinander zu kombinieren und somit beide Informationen in die Bewertung einfließen zu lassen. Dabei spielt jedoch der Zusammenhang zwischen Signal und Fehlerausprägung eine wichtige Rolle. Praktisch angewendet und erprobt wird diese Vorgehensweise für die Bewertung der zerstörungsfreien Prüfungen der Firma POSIVA, die sich mit dem Bau eines Endlagers für hochradioaktiven Abfall in Finnland beschäftigt.
Das Ziel des Artikels ist es eine Übersicht über neue methodische Ansätze und Verfahren zur Bewertung der Zuverlässigkeit von ZfP-Systemen in Übereinstimmung mit den spezifischen Anforderungen verschiedener industrieller Anwendungen zu geben. Nach einem Überblick über die in den vergangenen Jahrzehnten erreichten Fortschritte, wird der Fokus auf die gegenwärtigen Entwicklungen gerichtet. Für hohe Sicherheitsanforderungen wurde die quantitative Fehlerauffindwahrscheinlichkeit (probability of detection, POD) basierend auf 'hit/miss'- oder 'Signal-Response'-Analysen und die ROC-Analyse (Receiver Operating Characteristics) als typische Werkzeuge entwickelt. Im Rahmen des modularen Modells für die ZfP-Zuverlässigkeit unterscheidet man zwischen den rein physikalisch-technischen Einflussfaktoren, den industriellen Anwendungsfaktoren und den menschlichen Faktoren. Es hilft zum Beispiel zu erkennen, welche dieser Faktoren man in Modellierungsrechnungen bzw. mittels offenen oder Blindversuchen untersuchen kann. Ein neues Paradigma wird für die Betrachtung der POD als eine Funktion der gewählten Systemparameter und somit als Optimierungswerkzeug verwendet, anstelle sie für die endgültige Beurteilung zu nehmen. Zur Handhabung der Zuverlässigkeitsuntersuchung von realen Defekten in einer realistischen Umgebung werden ökonomisch vertretbare, aber dennoch präzise genug arbeitende Methoden, wie der Ansatz von Bayes oder modellbasierte Methoden vorgestellt. Die menschlichen Faktoren sind oft von ausschlaggebender Wichtigkeit für die Gesamtzuverlässigkeit. Hier hilft ein systematischer psychologischer Ansatz die Engpässe und Verbesserungsmöglichkeiten zu finden.