Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (12)
- Beitrag zu einem Tagungsband (8)
- Beitrag zu einem Sammelband (7)
- Vortrag (7)
- Posterpräsentation (5)
Schlagworte
- Radar (8)
- Non-destructive testing (7)
- Ground penetrating radar (5)
- Masonry (5)
- Tomography (4)
- Moisture (3)
- Void detection (3)
- Zerstörungsfreie Prüfung (3)
- Automatisierung (2)
- Bridge inspection (2)
Eingeladener Vortrag
- nein (7)
Die drei Beispiele zerstörungsfreier Prüfungen an Spannbetonbrücken zeigen unterschiedliche Problemstellungen und deren Lösung mit unterschiedlichen Ansätzen.
Allen drei Beispielen gemeinsam ist die Verwendung kommerzieller Geräte. Diese werden von verschiedenen Anbietern bereitgestellt. Eine weitere Gemeinsamkeit ist, dass die Grundgeräte durch zusätzliche Maßnahmen ergänzt. Erst dann ist der gewünschte Untersuchungserfolg sicher gestellt.
Im ersten Beispiel wurde die vom Auftraggeber geforderte Präzision dadurch erreicht, dass systematische Voruntersuchungen stattfanden. Die Übertragung der Lokalisierung direkt auf die Betonoberfläche stellte sicher, dass keinen Informationsverluste an die nachfolgenden Aufgaben auftraten.
Das zweite Beispiel zeigt den Nutzen von Automatisierung und Kombination von Verfahren. Damit können dem Auftraggeber die notwendigen Angaben über Einbauteile mit großer Detaitreue und leicht verständlicher Visualisierung aufbereitet werden. Der abschließende Bericht zeigt, wie vorhandene Auswertungen sinnvoll durch noch in der Forschung befindliche Ansätze bereichert werden.
Insgesamt ist die zerstörungsfreie Prüfung in der Lage, an Brücken preisrelevante Fragestellungen zu lösen. Voraussetzung hierfür ist eine sorgfältig geplante Vorgehensweise und ein sicheres Verständnis der Grundlage der eingesetzten Geräte und Auswertungsschritte.
Ground Penetration Radar (GPR) as a non-destructive (NDT)-method can be applied to obtain detailed information about the inner structure and condition of bridges without damaging the structure.
In this paper the capabilities and limitations of the application of the fast inspection technique GPR will be demonstrated.
In addition to GPR investigations, geoelectrical measurements, coring and petrophysical investigations have been carried out.
The investigated railway bridge in Olesnica is a typical European masonry arch bridge (age, construction and span length).
It shows typical damage to the masonry arches such as increasing salt concentration, destruction, material losses and longitudinal cracks.
Radar measurements were carried out with two main objectives: (1) Identification of basic geometric dimensions of the bridge and identification of construction details; (2) Evaluation of the condition of the masonry, such as mechanical damage (e.g. cracks) or variation of the moisture content.
Radar antennas of different frequencies (having different penetration depths) have been used to estimate the thickness of the walls.
Because of the high attenuation in the inner masonry structure the measurements have not produced satisfying results, but the radar measurements have been successfully applied to investigate the moisture distribution in the masonry.
These results have been verified by coring and through geoelectrical measurements.
Cracks were studied at two testing areas at one wing wall of the bridge using an automatic 2D radar scanning system.
The radar data were processed using advanced data processing tools like FT-SAFT reconstruction and data fusion.
The processing sequence allowed the creation of high-resolution depth sections (C-Scans).
Positioning accuracy of an automatic scanning system for GPR measurements on concrete structures
(2012)
Air voids in concrete like honeycombs are one of the major concerns regarding quality assurance for the construction of infrastructure buildings like bridges or tunnels. This paper shows that voids in reinforced concrete walls or slabs can be detected by two standard ground coupled GPR antennas in transmission mode using a two-side zero-offset profiling configuration like in borehole radar applications. For the detection of voids only the amplitudes of the direct wave in transmission mode are evaluated. Even when the depth of the void can not be detected in this configuration, the major advantage of the zero-offset profiling in transmission mode is a lower interference with the surrounding reinforcement compared to a regular one-side reflection profiling. The capability of the two-side zero-offset profiling is demonstrated on a test specimen with a set of polystyrene balls of two different sizes representing voids like honeycombs in concrete. GPR measurements are realized by an automated scanning system in order to allow for a synchronous movement of the antennas. In transmission mode voids can be detected at greater depths compared to reflection mode, since the travel path of the direct wave is half as long. Another characteristic of the transmission mode is that the direct wave through the air voids is faster and arrives earlier than the direct wave in the surrounding concrete. Hence it can be separated from the strong reflection of the reinforcement. Finally the measurements in transmission mode are less sensitive to the antenna frequency and polarization than in reflection mode.