Filtern
Dokumenttyp
- Zeitschriftenartikel (4) (entfernen)
Referierte Publikation
- nein (4) (entfernen)
Schlagworte
- CFD Modellierung (1)
- Combustion efficiency (1)
- Combustion factor (1)
- Cone calorimeter (1)
- Fire load density (1)
- Flammschutzmittel (1)
- Großversuch (1)
- Single burning item test (1)
- Wohnungsbrände (1)
The amount of heat, which is released by fire loads during the combustion
process, depends on the material characteristics, the ventilation
conditions, the storage density and the distribution. To evaluate the
structural stability of buildings in case of fire, the fire load has to be
quantified. In Germany, the fire load is quantified by using the combustion
factor m, while internationally the combustion efficiency χ is
applied. Both factors assess the burning behavior of materials, but the
determination is carried out in different ways. Since the testing facility
was abolished fifteen years ago, it is not possible to determine the combustion
factor m anymore. So, it should be found out, if the combustion
efficiency χ is a convenient method to quantify the fire load under the
consideration of the German standards. As a part of the research, combustion
efficiencies χ were determined for eight materials in the cone
calorimeter and the single burning item test at different heat fluxes.
The values of the combustion efficiencies χ as well as the corresponding
combustion factors m were discussed and compared to the values of the
literature. The results show an influence of the testing facility on the
combustion efficiency. The values of the combustion efficiency determined
in the single burning item test were higher than the values from
the cone calorimeter.
In Europa kommen ca. 80 % der Brandtoten bei Wohnungsbränden ums Leben. Dabei sind Brände in Wohn- und Schlafzimmern besonders gefährlich. Einige Objekte, wie Polstermöbel und Fernseher, stellen im Brandfall eine besonders große Gefahr dar, da sie sich schon durch kleine Zündquellen, wie ein Feuerzeug oder eine Kerze, leicht entzünden lassen, eine hohe Wärmefreisetzungsrate haben und viel Rauch produzieren. Ein einzelnes Sofa kann in einem Raum einen Flashover erzeugen. Besonders im Kinderzimmer tritt oft eine Häufung an besonders gefährlichen Objekten wie Polstermöbeln, Matratzen und elektrischen Geräten auf. Da Kinder sich im Brandfall oft falsch verhalten sie verstecken sich an schwer zugänglichen Orten wie unter dem Bett oder im Schrank anstatt den Raum zu verlassen sind sie besonders gefährdet.