Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (14)
- Deutsch (6)
- Italienisch (1)
Referierte Publikation
- nein (21) (entfernen)
Schlagworte
- Non-destructive testing (7)
- Cultural heritage (6)
- Historic masonry (6)
- Radar (4)
- Structural modelling (4)
- Damage (3)
- Flood (3)
- Historisches Mauerwerk (3)
- Non-destructive testing in civil engineering (3)
- Validation (3)
Organisationseinheit der BAM
ONSITEFORMASONRY is a research project funded by the European Commission under the 5. Framework Programme 1998-2002 in the Thematic Programme: Energy, Environment and Sustainable Development and the Key Action: The City of Tomorrow and Cultural Heritage.
The main objective of the project is the development and improvement of methodologies for the evaluation of the structure of historic masonry Cultural Heritages. For effective restoration and conservation of historic buildings, a detailed assessment of the structural safety and physical damages of the masonry structure is required. Therefore, typical masonry damages and the most frequent pathologies in each region have been identified and summarised in a catalogue of problems and damages. Selected non-destructive (NDT) and minor-destructive (MDT) techniques are performed by the partners including the development of software packages for fast and automated data analysis. The strategy for an effective and useful combination of different NDT and MDT methods will be worked out considering the results of case studies and taking into account the experiences of the consortium members. Recommendations and guidelines for the application of the integrated methodologies will be developed in close co-operation with end-users.
Ziel des von der Europäischen Kommission geförderten Projektes ONSITEFORMASONRY war die Entwicklung und Optimierung von Verfahren und Verfahrenskombinationen für die Bewertung der Struktur- und Materialeigenschaften von historischem Mauerwerk. Es wurden zerstörungsfreie und zerstörungsarme Methoden wie z. B. Radar, Ultraschall, Impact-Echo, Mikroseismik, aktive Thermografie und Flat-Jack weiterentwickelt und im Rahmen einer Vielzahl von Fallstudien vor Ort eingesetzt. In dieser Veröffentlichung werden die Ergebnisse des Projektes vorgestellt, und es wird auf weiterführende Literatur und Informationsquellen verwiesen.
Aufbau eines historischen Mauerwerkskörpers ("Obelix") zur Bewertung von zerstörungsfreien Verfahren
(2004)
Zusammenfassung
Auf dem Gelände der BAM entstand im Frühjahr 2003 ein Probekörper, der die Verbindung bildet zwischen Laborprüfkörpern und realen Bauwerken aus Mauerwerk. Er dient der Validierung und Weiterentwicklung von zerstörungsfreien Prüfverfahren zur Untersuchung von historischem Mauerwerk. Dabei wurde große Sorgfalt auf die Materialauswahl und den strukturellen Aufbau gelegt. Die Materialien sollten denen von realen, historischen Bauwerken entsprechen. Der strukturelle Aufbau ergibt sich aus praxisrelevanten Fragestellungen. Der Probekörper steht auch anderen Arbeitsgruppen für Verfahrensvalidierungen zur Verfügung.
Strategies and methodologies for the assessment of historic masonry structures based on non-destructive and minor-destructive testing methods were developed in the European Research Project ONSITEFORMASONRY and were successfully applied to assess the structure and material properties of selected structural elements in the Altes Museum in Berlin-Mitte.
For the planning of a broad reconstruction within the framework of a master plan concerning the whole of Museum Island in Berlin, several questions arose which are also typical for other historic structures in general, thus the Altes Museum was chosen as a pilot site for the validation of non-destructive testing methods.
The research project "Ultrasonic Net for Concrete Monitoring (UNeCOM)" aims at developing a methodology for an embedded ultrasonic network for the condition assessment of infrastructure constructions. Civil engineering structures made of concrete, which are located in tectonically active regions or undergo special loading conditions, may require continuous monitoring. It is important to assess the condition of the building and its stability to recognise and classify the effect of a seismic event or evolving damage at early stages before failure occurs. Embedded ultrasonic sensors offer the possibility to detect changes in the material and degradation mechanisms from inside the structure in areas which are difficult or impossible to inspect otherwise. In contrast to conventional ultrasonic testing methods, where the concrete surfaces are scanned with ultrasound probes, this new approach uses sensors, which are embedded into concrete, eliminating the effect of variable coupling conditions between sensors and concrete. This method allows an integral detection of changes in the concrete structure, for example due to seismic activities, to detect mechanical impacts, as well as degradation of the material due to overloading. Such methods have great relevance especially for the monitoring of constructions like power plants, bridges, offshore structures and other structures with high technical safety requirements. The sensor network can be controlled remotely through the internet which is also being used for data transfer. The embedded sensor network is designed to monitor structural damage and concrete degradation globally with high sensitivity.
CHEF provides knowledge about flood protection of cultural heritage objects and directly supports the European Floods Directive by giving recommendations on how to assess the vulnerability of monuments. A comprehensive analysis of protective measures BEFORE, DURING and AFTER a flood has been carried out within the project, including technical and administrational measures. An overview of these measures is given, followed by recommendations on how to establish the most effective protective strategies.
The process of ensuring reliability of NDT applications contains various aspects, such as determining the performance and probability of success, the uncertainty in measurement, the provision of clear and functional procedures and ensuring the correct application accordingly. Test specimens have become powerful elements in supporting many of these aspects. Within the committee for NDT in Civil Engineering (NDT-CE) of the German Society for Nondestructive Testing (DGZfP), the subcommittee on Quality Assurance (UA-QS) therefore addresses the design and the integration of test specimens in the quality assurance process. Depending on the specific purpose, the requirements on test specimens can vary significantly based on the defined simulated scenario. The most prominent purposes of test specimens might be seen in providing references for inspection systems in regard to function control, calibration and validation. Further aspects can be parametric studies, basic investigation of physical principles related to NDT or a simplified and therefore comprehensive demonstration of inspection concepts (e.g. for teaching purposes). The specific purpose of a test specimen dictates the requirements regarding its conception, including the exact design, the material or the fabrication accuracy and the conditioning. In the development of a general guideline by the UA-QS for application-specific procedures and their validation, the use of test specimens is addressed and specific concepts for the design of test specimens are made. This includes the analysis of the measurement process regarding any given application, deriving an adequate calibration approach for it and designing test specimens (calibration specimens) accordingly. Furthermore, it includes the validation of the procedure taking into account all conditions related to the specific application in the field. The validation requires a statistically sufficient number of trials. Thorough evaluation of each trial can only be established if the ground-truth is known. Therefore, test specimens providing a realistic but controlled simulation of the inspection problem are valuable and indispensable elements in the validation process. The requirement of being fully realistic will often not be possible to fulfill due to practical restrictions. Any aspect that cannot be included in the simulation realistically needs to be simulated conservatively. This again, requires a sufficient understanding of the inspection principle and technique to ensure conservativeness. Among other quality-assurance-related aspects, the UA-QS establishes concepts and guidelines regarding sound and efficient approaches for the specific purposes of test specimens. This subcommittee brings together representatives of different Groups along the entire value chain of NDT-CE, including researchers, practitioners, manufacturers and clients. They all work together in establishing a common understanding and level of quality assurance in the industry.
The field of non-destructive testing of civil structures (NDT-CE) has been continuously growing. Due to the complexity and diversity of civil constructions as well as the heterogeneity of concrete, specific standards or guidelines for the application of modern NDT-CE are still missing. The development of individual solutions is the current approach, which is just as challenging as it is common for NDT-CE.
With the increasing development and commercialization of NDT-CE technology, the group of practitioners is growing. To ensure a good level of quality in the industry, it appears necessary to establish adequate means.
Naturally, the performance of NDT-CE methods regarding a specific application is strongly dependent on choosing the most suitable inspection technique and applying it correctly, generally referred to as the inspection procedure in the field of NDT. There are well-defined guidelines regarding procedure documentation and handling in many fields of NDT (e.g. nuclear, aerospace or automotive) according to the high importance of procedures in assuring a successful and reliable application. For a long time, this has not always been the case with NDT-CE, which is still considered a unique discipline of NDT. Part of the reason for that might be the young development state of NDTCE, the heterogeneity of building materials like concrete, timber or masonry as a material and the diversity of civil structures. In consequence, NDT-CE procedure development is considered challenging.
Among other aspects, addressed in the subcommittee on Quality Assurance (UA-QS) within the committee for NDT-CE of the German Society for Nondestructive Testing (DGZfP), part of its work aims at establishing an adequate basis for NDT-CE procedure development. While some of the highly developed approaches from other industries are taken into consideration, they need to be analyzed regarding their suitability for NDT-CE and adapted accordingly. For a procedure to be as defined as possible, it needs to contain sufficient information, such as the scope and limitations regarding material, geometry and condition of the test object, inspection parameters, calibration, data acquisition, analysis criteria as well as requirements regarding the inspection personnel.
For a successful implementation in the field, it is important to define the specific procedure as precisely as possible. Despite the necessity of a great amount of information to be included, the procedure needs to be suitable for efficient field application.
The UA-QS is developing a guideline for NDT-CE procedures suitable for application in this field of NDT to ensure correct and reproducible application. To demonstrate and evaluate this concept, specific examples of procedures are also produced. In particular, the UA-QS has developed a procedure for the detection and positioning of tendon ducts using Ground Penetrating Radar (GPR). This procedure is tested regarding the practical applicability in a roundrobin on a defined type of reference test block.