Filtern
Erscheinungsjahr
- 2005 (6) (entfernen)
Dokumenttyp
Schlagworte
- Recycling (2)
- Cadmiumtellurid (1)
- CdTe-Modules (1)
- Chlorierung (1)
- Denitrification rate (1)
- Düngemittel (1)
- Dünnschichtmodul (1)
- EBPR (1)
- Glycogen (1)
- Internal substrate (1)
Eingeladener Vortrag
- nein (1)
Along with the globally increasing energy demand the application of renewable energy sources is
urgently required. According to national regulations and international treaties (e.g. Kyoto Protocol)
these sources shall be sustainably available at reasonable financial effort and non-polluting during
production, use and waste treatment. Using photovoltaic sources (PV), these requirements can
clearly be met. All industry has to follow the best available technology and an integrative life cycle
approach for their products and production. PV thin film technology strictly responds to this obligation.
In order to save material resources and to minimise undesirable landfill recycling of spent PV
modules is necessary. Recycling of multi-component materials containing mixed metals typically
consists of three parts: liberation, separation, and recovery. In our study (RESOLVED an EU
Demonstration Project) the focus is on liberation and separation. The converting layer (CdTe) was
liberated (removed) from the glass carrier by sandblasting and separated subsequently from the
blast material (e.g. corundum) and other components using stepwise different separation techniques.
Both the glass substrate and CdTe are subject to re-use. The overall feasibility of the recycling
process is primarily governed by the efficiency of the procedure applied to the separation of CdTe
from the rest (blasting material, glass residues, etc.). This was performed by water-based flotation.
Several flotation procedures were studied regarding their separation yields. The distribution of
CdTe in the phases involved (flotate, water, residue) was measured using energy dispersive X-ray
fluorescence spectrometry (EDXRS) intended for future routine application and by instrumental
large-volume photon activation analysis (IPAA) as a reference procedure. The results of both analytical
methods were in satisfactory agreement.
Enhanced post-denitrification without addition of an external carbon source in membrane bioreactors
(2005)
This study investigates a post-denitrification process without the addition of an external carbon source combined with an enhanced biological phosphorus removal (EBPR) in a membrane bioreactor (MBR). Three trial plants, with two different process configurations, were operated on two different sites, and a variety of accompanying batch tests were conducted. It was shown that even without dosing of an external carbon source, denitrification rates (DNR) much above endogenous rates could be obtained in post-denitrification systems. Furthermore, the anaerobic reactor located ahead of the process had a positive impact on the DNR. Given these surprising results, the project team decided to identify the carbon source used by the microorganisms in the post-denitrification process. Batch tests could demonstrate that lysis products do not play a major role as a C-source for post-denitrification. The following hypothesis was proposed to explain the observations: the glycogen, internally stored by the substrate accumulating bacteria, if anaerobic conditions are followed by aerobic conditions could act as carbon source for denitrification in post-denitrification system. First exploratory batch tests, where the glycogen evolution was monitored, corroborate this assumption.