Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (75)
- Beitrag zu einem Tagungsband (46)
- Zeitschriftenartikel (18)
- Beitrag zu einem Sammelband (12)
- Posterpräsentation (7)
- Buchkapitel (5)
- Forschungsbericht (4)
- Sonstiges (3)
Referierte Publikation
- nein (170) (entfernen)
Schlagworte
- Phosphor (18)
- Klärschlamm (17)
- Recycling (16)
- Klärschlammasche (14)
- Phosphorus recovery (13)
- Phosphorrückgewinnung (11)
- Sewage sludge (9)
- Sewage sludge ash (8)
- Thermochemical treatment (8)
- Bauschuttaufbereitung (7)
Organisationseinheit der BAM
- 4 Material und Umwelt (55)
- 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (55)
- 7 Bauwerkssicherheit (3)
- 7.1 Baustoffe (2)
- 1 Analytische Chemie; Referenzmaterialien (1)
- 1.4 Prozessanalytik (1)
- 4.2 Material-Mikrobiom Wechselwirkungen (1)
- 4.3 Schadstofftransfer und Umwelttechnologien (1)
- 7.4 Baustofftechnologie (1)
In dem Projekt sollten die Aufbereitung der Betonbrechsandfraktion aus Bauschutt mittels eines Nassverfahrens zu einer geeigneten Gesteinskörnung für die Betonherstellung sowie die vollständige Verwertung der bei diesem Verfahren anfallenden Reststoffe demonstriert werden.
Der im Rahmen der geordneten Vorsortierung mit zahlreichen Schritten zur Qualitätssicherung hergestellte Betonbrechsand war qualitativ hochwertig und wies nur geringe Schadstoffgehalte auf. Für die Nassaufbereitung des Betonbrechsands wurde vom Projektpartner Allmineral der Prototyp einer Sandsetzmaschine zur Dichtetrennung designt und konstruiert. Diese Sandsetzmaschine wurde für die umfangreichen Betonbrechsandversuche in die Aufbereitungsanlage der BAM integriert. Begleitend zur Aufbereitung wurden die eingesetzten Materialien, Bauschutt und Prozesswasser, sowie die Austragsprodukte chemisch-physikalisch und mineralogisch untersucht.
Die anschließenden Baustoffuntersuchungen zeigten, dass durch das im Demonstrationsprojekt angewandte Nassaufbereitungsverfahren eine deutliche Verbesserung der Materialeigenschaften des Betonbrechsandes erzielt werden konnte. Die Qualität von Natursteinkörnungen wurde (z.B. aufgrund von Kornschädigungen durch den Bruch des Altbetons und noch verbleibende Zementanhaftungen) gleichwohl nicht erreicht. Gerade die Betonprüfungen (mit Anteilen von bis zu 50% Betonbrechsand an der gesamten Gesteinskörnung) haben jedoch gezeigt, dass es dennoch sehr wohl möglich wäre, größere Mengen von aufbereitetem Betonbrechsand in der Betonherstellung zu verwerten und so im Sinne der Nachhaltigkeit den Verbrauch von natürlichen Sandvorkommen zu reduzieren.
Die bei der Nassaufbereitung des Betonbrechsands anfallenden Restsstoffe, nämlich die Fraktionen Leichtgut und Feinstfraktion wurden separat erfasst und bilanziert. Diese Materialien wurden auf die Eignung als Kompostzugabe in Hinblick auf Schadstoffanreicherungen und Pflanzenverträglichkeit untersucht (Projektpartner Deisl). Nach der Kompostierung in Rotteboxen wurden Wachstumsversuche mit dem Referenzgewächs Kresse (Kressetest nach ÖNORM) mit zufriedenstellenden Ergebnissen durchgeführt. Die Reststoffe Feinstgut und Leichtgut aus dem Nassaufbereitungsprozess könnten – sofern die Schadstoffgehalte nachweislich unter den vorgegebenen Grenzwerten liegen – als Zugabe zur Vererdung in der Kompostierung eingesetzt werden.
Zukünftig werden vermehrt P-Recyclate auf den Düngemittelmarkt kommen. Diese müssen ausreichend charakterisiert werden, um Sicherheit und Wirksamkeit beurteilen zu können. Mit dem Vortrag wurde der wissenschaftliche Beirat für Düngungsfragen des Bundesministeriums für Ernährung und Landwirtschaft beraten.
LD-Schlacken weisen eine große chemische Ähnlichkeit zu Protlandzementklinker auf. Sie enthalten jedoch noch bis zu 30% Eisen, das mineralisch in oxidischer Form gebunden vorliegt. Dadurch kann sich bei der Erstarrung die wichtigste Klinkerphase "Alit" nicht ausbilden.
Durch eine reduzierende Schmelzbehandlung der Schlacke kann des mineralisch gebundene Eisen als Metall separiert werden. Dadurch wird auch die Mineralogie der Schlacke so verändert, dass auch sie nun praktisch einem Portlandzementklinker entspricht.
Entsprechende Versuche wurden am kleintechnischen Lichtbogenofen der BAM durchgeführt. Es werden Ergebnisse vorgestellt und auf Grenzen und Möglichkeiten eines derartigen Prozesses im Hinblick auf eine industrielle Umsetzung eingegangen.
Wastewater contains a diverse array of organic and inorganic compounds and its complex composition strongly depends on the location and the connected dischargers. However, municipal wastewater as a carrier of feces and urine generally contains considerable amounts of the main nutrients nitrogen and phosphorus. The latter is in the focus of the discussions about the recovery potential of wastewater due to the relatively high mass flows of phosphorus in wastewater and the finite nature and decreasing quality of phosphate rock reserves. But due to the presence of the whole periodic table of elements, wastewater might contain further valuable components of interest for recovery including those defined as critical raw materials by the European Commission. Phosphorus and most of the other critical raw materials are fixed in the sewage sludge and after incineration in the sewage sludge ash (SSA). This is accompanied by high concentration factors from wastewater via sludge to ash. However, the mass fractions of the majority of elements in sewage sludge are comparable to those of the earth crust, indicating no relative enrichment. Nevertheless, enrichment factors of 100 or higher are given for phosphorus, copper, zinc, cadmium, silver, tin, lead and the platinum group elements indicating an anthropogenic input. An economic value of sewage sludge was estimated to $460,-/t calculated on the basis of the respective market prices for high purity elements – a theoretical value. A German survey of sewage sludge ashes showed that the mass fractions and the mass flows of most of the elements present in SSA are probably too low for an economic recovery. In most cases the mass flows are rather small compared to the imports and the chemical forms are not suitable for recovery. An exception is phosphorus that is present in high mass fractions up to 13% and that bears a high substitution potential. If the application of P-recovery technologies lead to a further concentration of valuable elements e.g. as by-products in side streams of the process, it would probably make also the recovery of other elements of economic interest.
Advantages of recycling gypsum plaster boards
During the last decades the material composition of buildings has become increasingly diverse. However, largely sorted material flows are needed for generating high quality secondary building materials. The use of secondary building materials can meet the requirements of sustainability in several ways: the extended time availability of primary raw materials and, thereby, the preservation of natural resources as well as the conservation of landfill sites.
Recycling of gypsum (calcium sulfate) can be a good example for the environmental benefits of closed-loop recycling. The content of sulfates in other secondary building materials, in particular in recycled concrete aggregates, should be minimized for quality reasons. In contrast, separated gypsum can also be used in gypsum production if the high quality requirements for the recycled gypsum are met. Since almost all processing steps in the recycling process are associated with environmental impacts, an environmental evaluation of the use of recycled gypsum as a substitute in gypsum production has to be carefully conducted.
This paper focusses on the techniques for generating recycled gypsum from gypsum plasterboards, the related quality requirements and a comprehensive environmental evaluation of the complete process.
During the last decades the material composition of buildings has become increasingly diverse. However, largely sorted material flows are needed for generating high quality secondary building materials. The use of secondary building materials can meet the requirements of sustainability in several ways: the extended time availability of primary raw materials and, thereby, the preservation of natural resources as well as the conservation of landfill sites.
Recycling of gypsum (calcium sulfate) can be a good example for the environmental benefits of closed-loop recycling. The content of sulfates in other secondary building materials, in particular in recycled concrete aggregates, should be minimized for quality reasons. In contrast, separated gypsum can also be used in gypsum production if the high quality requirements for the recycled gypsum are met. Since almost all processing steps in the recycling process are associated with environmental impacts, an environmental evaluation of the use of recycled gypsum as a substitute in gypsum production has to be carefully conducted.
This paper focusses on the techniques for generating recycled gypsum from gypsum plasterboards, the related quality requirements and a comprehensive environmental evaluation of the complete process.
Tricalcium-silicate (C3S) or Alite is the most important mineral in Portland cement. Since pure tricalcium-silicate is only stable above temperatures of 1250 °C, its decomposition has to be prevented technically by fast cooling after the sintering process. At room temperature, the decomposition velocity is very slow so that metastable tricalcium-silicate is obtained.
Although the mechanisms of clinker phase formation during burning process of Portland cement in a rotary kiln were solved and improved over the years, in view of possible economic and ecological benefits current projects aim to produce clinker phases from metallurgical slags. Recent studies discovered that the mineral phase which remained after a reducing treatment and separation of formed metallic iron from molten Linz-Donawitz (LD-) slags contained about 60 wt.% Alite despite it was cooled slowly. Because the results could be verified using slags from different origins and varying cooling velocities a chemical stabilisation of the Alite can be assumed. First tests in mortars indicate that workability, hardening and solid state properties are comparable with an ordinary Portland cement. An application of the observed phenomenon in cement production requires enhanced knowledge about formation and stabilisation conditions of Alite during crystallisation from melts in contrast to the sintering reactions in conventional Portland cement production. Therefore, this study focuses on the stabilisation mechanisms of Alite in consolidating melts. Samples from different melting experiments are analysed to determine stabilising factors.
Gegenstand dieser Arbeit ist die Untersuchung eines bestehenden pyrometallurgischen Prozesses zur Rückgewinnung von Tantal und Niob aus metallurgischen Reststoffen mit vorwiegend niedriger Wertstoffkonzentration.
Zur näheren Erforschung der im vorliegenden Stoffsystem ablaufenden Reduktionsprozesse wurden in einem Elektrolichtbogenofen Schmelzversuche im Pilotmaßstab durchgeführt. Als Reduktionsmittel diente Koks, welcher mithilfe einer Argon-gespülten Eisenlanze in die flüssige mineralische Schmelze eingebracht wurde. Während der Reduktionsbehandlung werden Refraktärmetalle wie Tantal und Niob in ihre Carbide überführt und anschließend in der erschmolzenen eisenbasierten Metallphase am Boden des Reaktors angereichert. Neben Tantal und Niob gelangt auch ein Teil des im Einsatzmaterial enthaltenen Titans als unerwünschtes Begleitelement in die Metallphase.
Sein Großteil verbleibt jedoch als Oxid in der Schlacke und wird dort hauptsächlich im Mineral Perowskit (CaTiO3) gebunden. Die erstarrten Schlackeproben wurden mit verschiedenen Methoden wie Röntgenfluoreszensanalyse, Röntgenbeugung und Rasterelektronenmikroskopie mit gekoppelter energiedispersiver Röntgenanalyse untersucht, um die Bildung tantalhaltiger Mineralphasen zu verschiedenen Stadien des Reduktionsprozesses zu verfolgen.
Die hier gewonnenen Erkenntnisse zeigen, dass weniger die durch das Einblasen von Koks verursachte Reduktionsreaktion, sondern das Absinken der tantalreichen Eisentröpfchen in der flüssigen mineralischen Schmelze, gefolgt von ihrer Anreicherung in die Metallphase, für die Kinetik ausschlaggebend ist.
Das Element Phosphor ist für alle Lebewesen essenziell und wird beispielsweise von Pflanzen in Form von Phosphaten aufgenommen.
In der landwirtschaftlichen Produktion werden dem Boden die Phosphate durch Wachstum und Ernte der Pflanzen entzogen und müssen ihm in Form von Phosphatdüngemitteln wieder zugeführt werden, um die Nahrungsmittelproduktion zu sichern. Rohphosphat stellt die Grundlage unserer derzeitigen Phosphatdüngemittel dar, ist aber gleichzeitig ein endlicher Rohstoff.
Des Weiteren sind insbesondere sedimentäre Rohphosphate oftmals mit erheblichen Konzentrationen toxischer Schadstoffe wie Cadmium, Uran und Thorium belastet. Eine Kreislaufführung des Phosphats sollte erfolgen, um natürliche Rohstoffvorkommen zu schonen und den Eintrag von Schadstoffen auf unsere Böden zu unterbinden.
- Spurenelementanalytik aus Fluoreszenzlampen optimiert
- Königswasseraufschluss Methode der Wahl für REE
- Perchlorsäure-/Flusssäureaufschluss in Kombination mit Königswasseraufschluss für die meisten Elemente geeignet
- Teilweise starke Abhängigkeit der Aufschlusseffizienz vom Element bzw. der vorliegenden Elementspezies
- Nicht aufgelöste Glasmatrix stört die Analytik nicht
The environmental concerns about availability of fossil fuels and greenhouse gas effect increase and alternative renewable fuels for power plants are gaining significantly of importance. One of the alternative renewable fuels is biomass but it is a difficult fuel because of its diversity and complexity. It can contain high percentages of K and Cl responsible for corrosion together with sand that have additionally an abrasive effect during combustion. Because of permanently extending the surface reaction due to abrasion the corrosion of the materials increases. In particular in power plants, the superheater tubes are exposed to a corrosive abrasive attack that is one of the main sources of concern. The development of new alloys for multilayer surface, which combines corrosive and abrasive resistance is therefore of high importance. Those new technical approaches must be at the same time cost-effective to be an alternative to conventional materials. This paper presents the principle of experimental methods developed for the investigations of high temperature corrosion combined with abrasion in thermochemical processes with high hydrochloric acid concentrations like during biomass combustion. The aim of the presented investigation methods it to test and develop suitable alloys for coatings for the super heater tubes of biomass power plants. First results of abrasion investigations show improved abrasion resistance compared to the multi-component reference material Alloy 625.
In Europa fallen jedes Jahr mehr als 10 Millionen Tonnen Klärschlamm an (Trockenmasse), etwa 2 Millionen davon in Deutschland, Bild 1 zeigt die Entwicklung der Klärschlammentsorgung in Deutschland. Nach dem Deponierungsverbot hat die Verbrennung des Klärschlamms stetig zugenommen. Die Verwendung im Landschaftsbau bzw. als Düngemittel ist nach einem Maximum um die Jahrtausendwende herum zugunsten der Verbrennung zurückgegangen, so dass heute jeweils etwa die Hälfte des Klärschlamms verbrannt und in der Landwirtschaft genutzt wird. Der Anteil an verbranntem Klärschlamm wird in Zukunft vermutlich weiter steigen. Ein wesentlicher Grund dafür ist die zunehmende Besorgnis über Schadstoffe im Klärschlamm, die Mensch und Umwelt schädigen könnten. Neben verschiedenen organischen und anorganischen Schadstoffen handelt es sich insbesondere um Emerging Pollutants of Concern (EMPOC) wie Antibiotika und Kosmetika.
Im Rahmen des EU-Projekts P-REX werden unter anderem die zwei thermischen Verfahren ASH DEC und Mephrec zur technischen Rückgewinnung von Phosphor aus Klärschlamm und Klärschlammaschen für die P-Düngemittelproduktion betrachtet. Die Produkte haben geringe Konzentrationen an Schwermetallen und eine bessere P-Löslichkeit als die nicht behandelten Klärschlammaschen. Die Klärschlammasche wird im ASH DEC-Verfahren mit Natriumverbindungen unter reduzierenden Bedingungen im Drehrohrofen behandelt. Das Verfahren wurde erfolgreich bei einem Demonstrationsversuch getestet. Das Mephrec-Verfahren ist ein metallurgisches Schmelzverfahren und wird unter reduzierenden Bedingungen im Schachtofen durchgeführt. Es ist eine Pilotanlage in Nürnberg geplant.
Complete survey of German sewage sludge ashes - phosphorous and technology metal recovery potential
(2014)
Sewage sludge ashes (SSA) are a possible source for recovery of phosphorous (P) and technology metals. Phosphorous is essential for all animate beings. So far, its sole external source is rock phosphate, which is a finite resource. The EU import dependency on P from regions with high domestic demands or political instabilities is almost complete. Furthermore, rock phosphate often contains high amounts of heavy metals like Cd and U that might lead to health and environmetal hazards. P recovered from SSA might diminish these problems. We analyzed SSA from German mono incineration facilities in terms of their elemental composition and respective recovery potential. More than 97% of the emerging SSA is monitored, enabling the determination of complete mass flows of the ashes and their components. Results indicate a P recovery potential of 19,000 t/a (more than 12% of the annual P demands for fertilizer production). The concentrations of Cd and U in SSA are significantly lower than in rock phosphate and thus might help to reduce possible envrionmental and health hazards.
Due to the great quantities of construction and demolition waste in Europe, the reuse of building material waste as secondary raw materials is of particular importance. A recycling of building materials can meet the requirements of sustainability in several aspects: the extended time availability of primary raw materials and the related protection of natural resources as well as the saving of landfill sites. In recent years sulphates originating from gypsum in secondary building materials, made of construction and demolition waste, received growing attention. Sulphates are unwanted in secondary building materials for concrete production as well as for other use e.g. in unbounded layers. The content of gypsum resp. sulphates in secondary aggregates can be reduced by different methods. Depending on the type of material different steps for selective dismantling can be used to separate gypsum containing residues from concrete rubble. Furthermore some steps for the processing of building rubble are suitable for the reduction of sulphates in the produced aggregates. An environmental evaluation of different ways for the production of recycled concrete aggregates was performed with regard to a reduction of sulphates in the secondary building material. The use of techniques for selective dismantling was environmentally advantegous for the deconstruction of three investigated model houses.