Filtern
Erscheinungsjahr
- 2023 (5)
Dokumenttyp
- Zeitschriftenartikel (2)
- Vortrag (2)
- Posterpräsentation (1)
Sprache
- Englisch (5)
Schlagworte
- FEM (5)
- Thermografie (4)
- Wind turbine rotor blades (4)
- Windenergie anlage rotorblätte (2)
- Corrosion (1)
- Pitting corrosion (1)
- SCF (1)
- Thermography (1)
- Windenergie Anlage Rotorblätter (1)
- Windenergie anlage rotorblätter (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (2)
To cope with the increase in the manufacturing and operation of wind turbines, wind farm operators need inspection tools that are able to provide reliable information while keeping the downtime low. Current inspection techniques require to stop the wind turbine. This work presents the current progress in the project EvalTherm, in which passive thermography is evaluated as a possible non-destructive inspection tool for operational wind turbine blades (WTBs). A methodology to obtain thermal images of rotating WTBs has been established in this project. However, the quality of the results is heavily dependent on various aspects such as weather conditions, information on the inspected WTB, damage history, etc. In this work, a section of a used WTB is simulated using finite-element modelling (FEM) as well as experimentally tested for evaluating the accuracy of the model. Such a model will provide insight into the potential thermal response of a certain structure (with specific material properties) in given weather (boundary) conditions. The model is able to provide satisfactory predictions of the thermal response of the structure, as well as indicate what thermal contrast(s) result from artificial defects introduced in the structure.
Weather-dependent passive thermography and thermal simulation of in-service wind turbine blades
(2023)
. To cope with the increase in the manufacturing and operation of wind turbines, wind farm operators need inspection tools that are able to provide reliable information while keeping the downtime low. Current inspection techniques require to stop the wind turbine. This work presents the current progress in the project EvalTherm, in which passive thermography is evaluated as a possible non-destructive inspection tool for operational wind turbine blades (WTBs). A methodology to obtain thermal images of rotating WTBs has been established in this project. However, the quality of the results is heavily dependent on various aspects such as weather conditions, information on the inspected WTB, damage history, etc. In this work, a section of a used WTB is simulated using finite-element modelling (FEM) as well as experimentally tested for evaluating the accuracy of the model. Such a model will provide insight into the potential thermal response of a certain structure (with specific material properties) in given weather (boundary) conditions. The model is able to provide satisfactory predictions of the thermal response of the structure, as well as indicate what thermal contrast(s) result from artificial defects introduced in the structure.
A steady increase of wind energy infrastructure [1] brings along a challenge of maintaining and operating wind turbines (WT) with its multiple components. Inspection of wind turbine rotor blades (WTB) is an important part of maintaining the overall health and safety of a WT. It involves visually or mechanically examining the blades for signs of damage or wear that could affect their performance and structural integrity of the entire WT. A WTB is a complex structure due to its ever-increasing scale (going beyond 100 m for a 16 MW WT [2]) as well as multi-material construction. Passive infrared thermography offers an alternative to contact- or proximity-based inspection techniques currently in use such as visual inspection performed by technical personnel (using a lift or a drone) and involves looking for signs of damage on the surface of the blades, and ultrasonic testing to detect internal defects. In contrast to active thermography, passive thermography uses the sun as source of heat, instead of conventional heat lamps, flash, or laser. An inspection technique to (semi-autonomously) inspect the WTBs of an operating WT from the ground has been developed [3]. Given the optimum thermal contrast (weather conditions for field measurements), external as well as internal features of the WTB can be visualised with appropriate post-processing. The work presented here is part of an ongoing multi-partner project titled “EvalTherm”: the evaluation of passive thermography as a non-destructive inspection tool of WTBs in operation. In this work, artificial defects representative of realistic defects in glass fibre reinforced plastic (GFRP) WTBs are introduced in out-of-service WTB pieces. These are scanned using X-ray computed tomography to obtain a three-dimensional reconstruction to be used as input for finite-element based thermal simulation using COMSOL Multiphysics. The simulation data is compared with infrared thermal inspection of the same WTB section, in order to compare the effect of thermal contrast caused in certain weather conditions. In addition, the influence of defect characteristics such as defect size, morphology, and location on detectability is investigated. Validated simulation models are used to predict thermal signatures of defects along with the optimal thermal contrast. Such simulation models in combination with weather forecast data can assist operators of wind turbine infrastructure to plan passive thermography inspection without the need of dangerous inspection procedures and associated shutdown of energy production.
The offshore environment is inherently corrosive. Consequently, pits may nucleate on exposed steel surfaces. Corrosion pits can be a source of crack initiation when the structure is subject to fatigue loading. The criticality of a corrosion pit with respect to the structural integrity depends on its shape and size and can be quantified using a stress concentration factor (𝐾𝑡). In this work, a parametric 3D finite element model is developed to perform stress analysis of a pitted plate subjected to uniaxial tensile stress. The model is used for an extensive parameter study in which 𝐾𝑡 is determined for various pit configurations. It is demonstrated that each one of the geometrical parameters holds a substantial influence on the location of the Most Critical Region (MCR). It is shown that 𝐾𝑡 increases as the pit gets narrower. Pits with an elliptical mouth yield higher 𝐾𝑡 values when the angle between the load direction and the pit mouth major axis increases. Moreover, 𝐾𝑡 increases with the increase in the localized thickness loss which is more pronounced for relatively wider pits. Finally, a regression model is presented for estimating 𝐾𝑡 based on the geometric parameters of a pit.