Filtern
Dokumenttyp
- Vortrag (13)
- Beitrag zu einem Tagungsband (4)
- Zeitschriftenartikel (2)
- Posterpräsentation (1)
Sprache
- Englisch (20) (entfernen)
Schlagworte
- Heat pump (9)
- Energy efficiency (6)
- Energy label (6)
- Energy labelling (5)
- Test method standard optimization (5)
- Seasonal performance (4)
- Air conditioner (3)
- Circumvention (3)
- Climate change (3)
- Coefficient of performance (3)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (13)
In this contribution, a dynamic test method to determine the seasonal performance of invertertype air conditioners has been developed and verified. In comparison to current test standards, where test modes for fixing the compressor speed are required, a dynamic approach is applied with unfixed compressor speed and thus better reflects the performance of air conditioners under real operating conditions. The dynamic tests are conducted in two calorimeter chambers. The indoor chamber is kept at a constant temperature whereas the outdoor chamber is subjected to a temperature profile based on the climate BIN-distribution, representing the reference cooling demand. The proposed dynamic test considers the dynamic control of an air conditioner and delivers results which could indicate the units’ performance in the field.
In this contribution, a dynamic test method to determine the seasonal performance of invertertype air conditioners has been developed and verified. In comparison to current test standards, where test modes for fixing the compressor speed are required, a dynamic approach is applied with unfixed compressor speed and thus better reflects the performance of air conditioners under real operating conditions. The dynamic tests are conducted in two calorimeter chambers. The indoor chamber is kept at a constant temperature whereas the outdoor chamber is subjected to a temperature profile based on the climate BIN-distribution, representing the reference cooling demand. The proposed dynamic test considers the dynamic control of an air conditioner and delivers results which could indicate the units' performance in the field.
The European Standards EN14511 and EN14825 are representing standardized procedures for testing the energy efficiency of heat pumps and air conditioners with electrically driven compressors for both space heating and cooling. In this study, these standards are analyzed and validated. It was figured out that the currently used methods implicate high complexity and high financial effort. In order to clarify the circumstances and to identify the deficits more in detail, a round robin test with independent and accredited laboratories was initiated. The aim is to develop an optimized test procedure that improves the feasibility of the testing procedure and finally its application. This study should lead to a repeatable and reproducible testing procedure, which is also compatible with the state of the art in heat pump technology and real operation conditions.
The European Standards EN14511 and EN14825 are representing standardized procedures for testing the energy efficiency of heat pumps and air conditioners with electrically driven compressors for both space heating and cooling. In this study, these standards are analyzed and validated. It was figured out that the currently used methods implicate high complexity and high financial effort. In order to clarify the circumstances and to identify the deficits more in detail, a round robin test with independent and accredited laboratories was initiated. The aim is to develop an optimized test procedure that improves the feasibility of the testing procedure and finally its application. This study should lead to a repeatable and reproducible testing procedure, which is also compatible with the state of the art in heat pump technology and real operation conditions.
The growing market penetration of heat pumps indicates the need for a performance test method that better reflects the dynamic behavior of heat pumps. In this contribution, we developed and implemented a dynamic test method for the evaluation of the seasonal performance of heat pumps by means of laboratory testing. Current standards force the heat pump control inactive by fixing the compressor speed. In contrast, during dynamic testing, the compressor runs unfixed while the heat pump is subjected to a temperature profile. The profile consists of the different outdoor temperatures of a typical heating season based on the average European climate and also includes temperature changes to reflect the dynamic behavior of the heat pump. The seasonal performance can be directly obtained from the measured heating energy and electricity consumption making subsequent data interpolation and recalculation with correction factors obsolete. The method delivers results with high precision and high reproducibility and could be an appropriate method for a fair rating of heat pumps.
Improving the energy efficiency of products was identified as the most important short-term opportunity to decrease energy consumption and therefore CO2-emission worldwide. More efficient products are created due to technical innovation. Restricting market access to efficient products only and making the most efficient products stand out by energy labelling are legislative approaches to encourage this development. Market surveillance authorities’ checks are fundamental to protect the consumer from wrongly declared goods on the market and ensure fair competition between manufacturers. However, the activities of market surveillance authorities are limited by their financial resources. Testing all product efficiency parameters in an accredited laboratory is very time consuming and cost intensive. In this article, a theoretical concept is presented which can be used to develop screening tests enabling market surveillance authorities to perform product tests with less financial resources. The concept identifies components which lead to non-compliance or make a product less energy efficient with minimum effort. The principle is based on a combination of random product tests, disassembling specific products and comparing components. This represents a new approach in product testing procedures beyond the current market surveillance activities. The concept is being tested within a research project funded by the German government.