Filtern
Dokumenttyp
Sprache
- Englisch (12)
Schlagworte
- Mechanochemistry (3)
- Adsorbates (2)
- Coating (2)
- Corrosion (2)
- DRIFTS (2)
- Geothermal (2)
- Infrared spectroscopy (2)
- Platinum (2)
- Polyaniline (2)
- Silica support (2)
- X-ray absorption spectroscopy (2)
- XANES (2)
- AEMFC (1)
- CO adsoprtion (1)
- CO adsorption (1)
- Characterization (1)
- Cold atmospheric pressure plasma (1)
- DDT (1)
- DVS (1)
- Decontamination (1)
- Femtosecond laser (1)
- Gas diffusion electrodes (1)
- H3PO3 (1)
- H3PO4 life cycle (1)
- High-temperature fuel cells (1)
- In situ (1)
- In situ coupling (1)
- Metal phosphonates (1)
- Metal-organic-frameworks (1)
- Mössbauer Spectroscopy (1)
- NEXAFS (1)
- Nobel-metal free electrocatalysis (1)
- Operando cell (1)
- Oxygen Reduction Reaction (1)
- PGM-free catalyst (1)
- PXRD (1)
- SURMOF (1)
- SiO 2 (1)
- String metal support interaction (1)
- Strong metal support interaction (1)
- Sustainable Synthesis (1)
- Wooden artworks (1)
- X-Ray imaging (1)
- XAS (1)
- XPS (1)
- XRD (1)
- Δμ XANES (1)
Organisationseinheit der BAM
According to the results of the experiments carried out, the following points can be concluded:
1. Exposure tests showed that specimens with the addition of SiO2 particles and polyaniline particles exhibit better corrosion resistance than specimens with the addition of only polyaniline particles or binder only.
2. Open circuit potential measurements showed that in the beginning of the experiments, both coatings had an open circuit potential 100 mV higher than carbon steel. Within one day of immersion, the potential of carbon steel increased significantly, indicating the formation of oxide layer. After extended exposure the carbon steel potential sat between PS1 (which had higher potential) and PS2 (which had a lower potential) and all three were in the range –600 mV to –500 mV vs Ag/AgCl.
3. Both coatings PS-1 and PS-2 were degraded with increasing exposure time, shown by the decrease of absolute impedance value at low frequency range after 2, 4, and 6 days exposure.
4. Potentiodynamic test was performed after 3 hours and 6 days exposure, and it was shown that the coating in the initial stage exhibited more passive behavior than the specimens exposed for 6 days.
Catalysts derived from pyrolysis of metal organic frameworks (MOFs) are promising candidates to replace expensive and scarce platinum-based electrocatalysts commonly used in polymer electrolyte membrane fuel cells. MOFs contain ordered connections between metal centers and organic ligands. They can be pyrolyzed into metal- and nitrogen-doped carbons, which show electrocatalytic activity toward the oxygen reduction reaction (ORR). Furthermore, metal-free heteroatom-doped carbons, such as N-F-Cs, are known for being active as well. Thus, a carbon material with Co-N-F doping could possibly be even more promising as ORR electrocatalyst. Herein, we report the mechanochemical synthesis of two polymorphs of a zeolitic imidazole framework, Co-doped zinc 2-trifluoromethyl-1H-imidazolate (Zn0.9Co0.1(CF3-Im)2). Time-resolved in situ X-ray diffraction studies of the mechanochemical formation revealed a direct conversion of starting materials to the products. Both polymorphs of Zn0.9Co0.1(CF3-Im)2 were pyrolyzed, yielding Co-N-F containing carbons, which are active toward electrochemical ORR.