Filtern
Dokumenttyp
Sprache
- Englisch (5) (entfernen)
Schlagworte
- Electrochemical noise (4)
- Stainless steel (2)
- A. Stainless steel (1)
- B. Potentiostatic (1)
- C. Passivity (1)
- C. Pitting corrosion (1)
- Cathodic process (1)
- Cathodic reaction (1)
- Corrosion monitoring (1)
- Corrosion testing (1)
Electrochemical noise (EN) enables corrosion research and monitoring in real time and with high sensitivity. In the case of submicroscopic nucleation events of pitting corrosion it has been observed that the cathodic process plays a decisive role in the mechanism as well as in the origin of EN signals, which depend not only on the metallic dissolution reaction but also on the electron-consuming process. EN signals arising from the nucleation process of localized corrosion on stainless steels can only be recorded due to the inhibition effect on the cathodic process achieved by the spontaneous formation of the passive layer. In consequence, passive layer stability becomes a significant factor in influencing EN signals. The way in which the passive layer stability affects the acquisition and analysis of EN signals arising from pitting corrosion on stainless steels is discussed in detail.
Electrochemical noise measurements on anodically polarised type 304 stainless steel surfaces in contact with buffer solutions of neutral pH were performed to study the effect of chloride ions in the nucleation of pitting corrosion. Passive layer stability and susceptibility to pitting corrosion after pickling and passivation at different environmental conditions were also investigated by means of electrochemical current noise measurements under cathodic and anodic polarisation. According to the obtained experimental results pits nucleate independently on the presence of chloride ions. It has been also shown that protectiveness of stainless steel surfaces after pickling strongly depends on the relative humidity of the environment in which the surface is subsequently passivated.
Unwanted corrosive phenomena on stainless steel surfaces like rouging had been observed for years occurring at certain service conditions. Rouging consists in the formation of a colored surface film containing mainly iron on metallic surfaces in contact with high-purity waters. In spite of numerous hypotheses and experimental examinations a clear explanation about the origin of rouging on stainless steels is currently still lacking. Because rouging occurs even at well passivated stainless steel surfaces the origin of this corrosive phenomenon should be related to the weakness of the stability of the passive film. In the present paper electrochemical noise measurements regarding the stability of the passive layer of alloy 904L (1.4539, X1NiCrMoCu25-20-5) in high-purity water at 70 °C depending on the cathodic process are presented. In addition, the importance of the cathodic reaction on the passivation and stability of the passive layer is discussed.