Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (29)
- Beitrag zu einem Tagungsband (12)
- Forschungsbericht (2)
- Beitrag zu einem Sammelband (1)
- Corrigendum (1)
- Vortrag (1)
Schlagworte
- Ringversuch (3)
- Spurenverunreinigungen (3)
- Acidity (2)
- Cell proliferation (2)
- Coating (2)
- Exocytosis (2)
- Femtosecond laser ablation (2)
- Gold nanoparticles (2)
- LTCC (2)
- LTCC technology (2)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
The material properties of recycled concrete aggregates (RCA) are
correlated to the sorting accuracy of the former demolition waste. Impurities like
wood, clay bricks or gypsum can lead to inferior building material properties. Harmful
substances like heavy metals or organic pollutants should be minimised as well.
Hence the non-concrete materials have to be separated from the concrete material
stream. This can be done during the demolition process by using selective
dismantling techniques. Alternatively a variety sorting and classifying techniques to
purify the crushed concrete can be utilized.
A research project, funded by the Federal Ministry for the Environment, Nature
Conservation and Nuclear Safety, investigated the possibilities of gaining recycled
concrete aggregates of a high quality for the reuse in the production of concrete. The
work focuses especially on how gypsum respectively sulphates in the crushed
concrete can be reduced. Sulphates can impair the setting behaviour of concrete
and also damage set concrete by causing expansion. Therefore the content of
sulphates in RCA is restricted by guidelines and standards in Germany.
Generally, gypsum in construction waste originates from interior fittings like gypsum
walls, floor screeds, plaster boards and also plaster. Most of these materials can be
reconstructed using selective dismantling techniques. This can be achieved either by
manual labour or by using mechanical equipment e.g. to remove floor screeds by
milling. Depending on the specific deconstruction site it can be more effective and/or
more environmentally compatible to remove sulphates by treating the crushed
concrete. Applicable treatments for sulphate reduction include dry processes like
manual sorting of gypsum wall blocks as well as wet treatments e.g. jigging.
In addition this research project an environmental performance evaluation was
undertaken to assess different techniques for reducing sulphates in recycled
concrete aggregates.
Aufgrund der großen Massenströme ist das Recycling von Baurestmassen von besonderer Bedeutung
für die Schonung von natürlichen Ressourcen. Eine wichtige Voraussetzung für ein hochwertiges
Recycling, wie z.B. eine Wiederverwertung von aufbereitetem Bauschutt/Altbeton als rezyklierte
Gesteinskörnung im Hochbau, ist die Einhaltung von Grenzwerten für Stör- und Schadstoffe. Dabei
steht der Sulfatgehalt im Eluat von Bauschutt besonders im Fokus. In der vorliegenden Studie wird
untersucht, wie durch die Optimierung von Abbrucharbeiten und Bauschuttaufbereitung hochwertige
Gesteinskörnungen aus Altbeton gewonnen werden können. Anhand von Literatur- und
Datenrecherchen werden zunächst Sulfatquellen in Gebäuden sowie verfügbare Abbruch- und
Aufbereitungstechniken zusammengestellt. Am Beispiel von unterschiedlichen Gebäudetypen werden
Szenarien für selektiven und nicht selektiven Abbruch (Schwerpunkt: Sulfatentfachtung) in Hinblick auf
ihre Umweltwirkungen ökobilanziell bewertet. Ergänzt werden diese Bewertungen durch
Untersuchungen an realen Bauschuttmaterialien und Abbruchprojekten. Auf dieser Basis werden
Handlungsempfehlungen für die Gewinnung von hochwertigen RC-Gesteinskörnungen erarbeitet und
diskutiert.-----------------------------------------------------------------------------------------
Due to the large-scale mass flow of construction and demolition wastes, the recycling of those
residues is of particular importance for the conservation of natural resources. An important
requirement for recycling on a high level, like the reuse of crushed concrete as recycled concrete
aggregate, is the observation of limits for hazardous substances and impurities. This study is focusing
on the reduction of sulphates in the eluate of crushed concrete. An investigation of possibilities to
optimize demolition and dismantling as well as treatment of crushed concrete with the objective of
gaining recycled concrete aggregates of high quality. Based on a literature research and a data review
the origins of sulfates in buildings and also the availability of techniques for demolition and treatment
of crushed concrete are listed and evaluated. Using the examples of different building types scenarios
for selective dismantling and non-selective demolition (focused on reducing suphates) are evaluated in
terms of affecting the environment. In addition samples from real demolition construction sites and
plants for treatment of construction rubble were investigated. Based on these results
recommendations for the production of high quality recycled concrete aggregates are worked out.
Coordination chemistry was applied to deposit pyridine-functionalized gold nanoparticles on silicon substrates. The particles were synthesized through the Brust/Schiffrin route with a subsequent ligand exchange reaction yielding well-defined particles of two different sizes. Multilayer deposition was carried out on a pyridine-terminated SAM, anchored on a hydroxyl-terminated silicon surface. Analogously, Hunter/Vögtle-type tetralactam macrocycle multilayers were deposited as well as mixed layers containing both either in an alternating sequence or as a macrocycle multilayer with a terminating nanoparticle layer. These composite layers were examined with respect to their ability to bind squaraine axles in the macrocycle cavities. The amount of guest bound is higher for the composite layer with alternating macrocycles and nanoparticles.
Reliability study of a tunable ka-band SIW-phase shifter based on liquid crystal in LTCC-technology
(2014)
A tunable substrate-integrated waveguide phase shifter using low-temperature co-fired ceramic (LTCC)-technology is presented in this paper. By changing the effective permittivity in the liquid crystal (LC)-filled waveguide, the differential phase can be tuned continuously. This is achieved by means of an analog signal applied to the electrodes, surrounding the LC. The design allows for precise tuning of the differential phase, which is proven with a Monte Carlo measurement resulting in phase errors of less than 3° at 28 GHz. Besides that, the ambient temperature dependency of the module is shown. The phase shifter has a high integration level and can be included into a complete and lightweight single-phased array antenna module. The phase shifter is realized with a high level of integration which is available through the multilayer process of the LTCC. It has a length of 50 and provides a differential phase shift of more than 360° at 28 GHz. The figure of merit for tunable phase shifters is >40°/dB.
XUV- and X-ray free-electron-lasers (FEL) combine short wavelength, ultrashort pulse duration, spatial coherence and high intensity. This unique combination of properties opens up new possibilities to study the dynamics of non-reversible phenomena with ultrafast temporal and nano- to atomic-scale spatial resolution. In this contribution we wish to present results of time-resolved experiments performed at the XUV-FEL FLASH (HASYLAB/Hamburg) aimed to investigate the nano-scale structural dynamics of laser-irradiated materials. Thin films and fabricated nano-structures, deposited on Si3N4-membranes, have been excited with ultrashort optical laser pulses. The dynamics of the non-reversible structural evolution of the irradiated samples during laser-induced melting and ablation has been studied in an optical pump - XUV-probe configuration by means of single-shot coherent scattering techniques (i.e. diffraction imaging [1]). In a first set of experiments we investigated the formation of laser induced periodic surface structures (LIPSS) on the surface of thin Si-films (thickness 100 nm). In a simplified view LIPPS are generated as a result of interference between the incident laser pulse and surface scattered waves which leads to a periodically modulated energy deposition. Time-resolved scattering using femtosecond XUV-pulses (with a wavelength of 13.5 nm and 7 nm) allowed us to directly follow LIPSS evolution on an ultrafast time-scale and with better than 40 nm spatial resolution. The observed scattering patterns show almost quantitative agreement with theoretical predictions [2] and reveal that the LIPSS start to form already during the 12 ps pump pulse. In the second set of measurements we studied picosecond and femtosecond laser induced ablation and disintegration of fabricated nano-structures. Correlations of coherent diffraction patterns measured at various time delays to the pattern of the undisturbed object show that order in the structure is progressively lost starting from short length scales. This structural rearrangement progresses at close to the speed of sound in the material. Under certain circumstances (e.g. adequate sampling) it became also possible to reconstruct real-space images of the object as it evolves over time [3]. The possibility of femtosecond single-shot imaging of ultrafast dynamic processes with nanoscale resolution provides yet more details of the physical processes involved. [1] H. N. Chapman et al. Nature Phys. 2, 839 (2006). [2] J. F. Young et al., Phys. Rev. B 27, 1155 (1983). [3] A. Barty et al. Nature Phot. 2, 415 (2008).
The paper gives a survey of the Soviet (Russian) -German activities which started in 1988 with the objective of creating a long-term scientific-technical cooperation in the field of transport and storage casks for spent nuclear fuel. The first step, i.e., the step of informing each other about the state of development is done. The more complicated second phase with concerted common activities of both the Russian and German competent authorities and industrial enterprises is intended to start in the near future.
Untertitel:
Zur Funktionsweise der Systeme
Unterscheidung in Fahrzeug-Stabilisierung und Anhänger-Wank-Stabilisierungsfunktion
Stand von Wissenschaft und Technik
allgemein anerkannte Regeln der Technik
Warum ist die Wirkvorschrift so wichtig? Gibt es Alternativen?
Ist eine Einführung von elektronischen Fahrstabilisierungseinrichtungen auch ohne gesetzliche Vorgabe denkbar?
Einbindung in den Markt (u. a. Bustouristik)
Welche weiteren Vorstöße werden unternommen, um die vorhandenen Systeme in Regelwerke und damit in die Flotten einzuführen?
Vorgehen in Dänemark