Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (25)
- Zeitschriftenartikel (18)
- Beitrag zu einem Sammelband (8)
- Buchkapitel (2)
- Vortrag (1)
- Sonstiges (1)
- Forschungsbericht (1)
Schlagworte
- Pool fire (14)
- CFD (6)
- Organic peroxides (6)
- TBPB (6)
- TBPEH (6)
- Mass burning rate (4)
- Safety distances (4)
- Surface emissive power (4)
- Irradiance (3)
- Poolfeuer (3)
Eingeladener Vortrag (wissenschaftliche Konferenzen)
- nein (1)
Mechanical drop test scenarios for Type B (U) packages according to the IAEA regulations have to be carried out onto the so-called “unyielding target” (usually with cask impact limiters) and onto the puncture bar respectively. They are predefined and do not require any further investigation of scenarios that really could happen on transportation routes. Cask accident scenarios in the framework of approval procedures for interim storage sites are derived from a detailed analysis of the handling procedures necessary from arrival of cask at the site to its storing position.
In that case, casks are usually handled without impact limiters. Dependent on possible drop heights, drop positions and floor properties, conservative cask accident scenarios are derived for further safety proofs. According to the mechanical assessment concept of the considered approval procedure numerical calculations have to be provided by the applicant to demonstrate mechanical cask safety. Stresses and strains in the cask body as well as in the lid System have to be identified and assessed. Using the example of a 3-mvertical-drop of a transport and storage cask for spent fuel elements onto the floor construction made of damping concrete covered by screed, BAM developed a finite element model. The finite element code ABAQUS/Explicit™ was used. Results of experimental investigations are not available. Therefore parameter studies are necessary to identify the sensitivity of the finite element model to significant Parameters and to verify the finite element models according to the requirements of the Guidelines for the Numerical Safety Analyses for the Approval of Transport and Storage Casks for Radioactive Materials (BAM GGR-008). The paper describes the modeling of the material behavior and attachment of bottom side cask components. Questions concerning the modeling of a crack length limiting reinforcement in the screed layer are discussed. The influence of the mesh density of the screed layer and its strength is considered as well. Finally, the developed finite element model can be used for a numerical safety assessment. It can help to understand the complex mechanisms of the interaction between the cask components and floor construction.
Bisher ist das Sicherheitsniveau verfahrenstechnischer Anlagen in Deutschland hoch. Die Anzahl der Institute, die auf dem Gebiet der technischen Sicherheit forschen und damit zum Kompetenzerhalt beitragen, geht kontinuierlich zurück. Dies liegt zum einen an der aktuellen Forschungspolitik, zum anderen daran, dass die neuen Themen wie Life Sciences, Nano-, Umwelt- oder Informations- und Kommunikationstechnologien insbesondere für junge Menschen, die gerade dabei sind, sich beruflich auszurichten, eine hohe Attraktivität besitzen. Der Staat und die Wirtschaft sind aufgerufen gemeinsam etwas dagegen tun.
The industrial fire accidents e.g. Buncefield (2005) and Jaipur (2009) have come up with several issues concerning safe storage and transportation of flammable liquids. The pre and post fire consequences are therefore important to be analyzed prior to the handling of flammable fuels. Pool or/and tank fire is the most often seen scenario after the leak/spill of liquid fuel. An overview of the typical scenarios from large hydrocarbon and organic peroxide pool fires and their respective safety distances for the people and the infrastructure are the important subjects of this paper.
Die Bedeutung von Flüssigerdgas (LNG, liquefied natural gas) ist durch die Erschließung entfernt liegender Resourcen und den damit verbundenen Transportwegen sowie durch die verbesserte Prozesstechnik bei der Verflüssigung (z.B. Mixed Fluid Cascade (MFC®) Verflüssigungsprozess) weltweit gestiegen. In den letzten Jahren sind zahlreiche neue Großanlagen wie die in Kollsnes, Hammerfest (beide Norwegen 2003, 2007), Kwinana (Australien 2008) und Shan Shan (China,
2004) mit Kapazitäten von bis 4.7 Mt/a entstanden. Das Gefährdungspotential von flüssigem Erdgas besteht neben dem niedrigen Siedepunkt Tb = −161 °C im Zündbereich zwischen 4.4 - 17 Vol.% sowie im großen Expansionsverhältnis. Bei einer störungsbedingten Freisetzung von LNG kann es somit zu Poolfeuer kommen, wodurch mit großem Schaden an benachbarten verfahrenstechnischen Anlagen und vor allem an Personen zu rechnen ist.