Filtern
Dokumenttyp
- Zeitschriftenartikel (3) (entfernen)
Sprache
- Englisch (3)
Schlagworte
- Amino group (2)
- Ammonia (2)
- Cell culture (1)
- Fluorescence (1)
- Grafting (1)
- Hydrogen (1)
- Infrared absorption (1)
- Low pressure plasma (1)
- Microwave plasma (1)
- Polymer (1)
- Polymer surface (1)
- Polymers (1)
- Pulsed microwave plasma (1)
- Surface analysis (1)
- XPS (1)
On the Applicability of Plasma Assisted Chemical Micropatterning to Different Polymeric Biomaterials
(2002)
A plasma process sequence has been developed to prepare chemical micropatterns on polymeric biomaterial surfaces. These patterns induce a guided localized cell layover at microscopic dimension. Two subsequent plasma steps are applied. In the first functionalization step a microwave ammonia plasma introduces amino groups to obtain areas for very good cell adhesion; the second passivation step combines pattern generation and creation of cell repelling areas. This downstream microwave hydrogen plasma process removes functional groups and changes the linkages of polymer chains at the outermost surfaces. Similar results have been obtained on different polymers including polystyrene (PS), polyhydroxyethylmethacrylate (PHEMA), polyetheretherketone (PEEK), polyethyleneterephthalate (PET) and polyethylenenaphthalate (PEN). Such a rather universal chemical structuring process could widen the availability of biomaterials with specific surface preparations.
Pulsed and cw microwave plasma excitation for surface functionalization in nitrogen-containing gases
(2003)
Results are presented of polymer surface functionalization processes in pulsed and continuous wave (cw) microwave-excited plasmas in nitrogen-containing gases under admixture of hydrogen. A maximum selectivity of 100% for amino groups with respect to all nitrogen functional groups (NH2/N) was obtained in cw microwave (MW) plasmas either for very short treatment durations below 100 µs in pure NH3, or within approximately 10 s in hydrogen-rich nitrogen-containing plasmas. The amino and overall nitrogen surface densities, NH2/C and N/C, reach up to 3.5% and 35%, respectively. Post plasma processes of functionalized polymers are discussed in the light of monofunctionalization. Down to pulse duration of 1 ms, plasma decomposition rates of NH3, determined by infrared absorption spectroscopy, are found to scale linearly with the duty cycle. In this regime, the main effect of a duty cycle variation in pulsed NH3 plasmas on surface functionalization can be interpreted to result from changes in the concentration of the dominant stable species in the gas phase, NH3, N2 and H2, which are activated by subsequent plasma pulses. With increasing duty cycle, NH3 decomposition to N2 and 3H2 more and more dominates over the supply of fresh NH3. The nitrogen-removing role of hydrogen in the plasma is discussed in detail, whereas the role of the numerous transient nitrogen-containing species remains to be studied in the future.
Low-pressure gas-discharge plasmas are widely used for polymer surface functionalization on industrial scale. For biomaterial applications, the density and selectivity of the functionalization are of particular importance, because functional groups control the immobilization of biomolecules. Therefore, surface modification of biomaterials is a challenging task for low-pressure plasma technique. Plasma processes have been successfully applied to various polymer types in order to generate multifunctional surfaces. This paper discusses the present state and the prospects of non-coating plasma processes to generate mono functional surfaces of controlled amino group density. Such surfaces appear most desirable for many applications. The results of various microwave- and radio-frequency- excited plasma processes reported in the literature are reviewed and compared to a sequence of experiments that was conducted in a UHV reaction environment. Non-thermal plasmas are especially well suited for thermally damageable polymers. The effect of hydrogen admixture to discharges in nitrogen and ammonia is discussed in detail. The optimization of process parameters lead to highly selective amino functionalization of high density. The selectivity reached 100% -NH2/N at a surface density of amino groups of 3% -NH2/C.