Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- Biomaterial (5)
- Bone (5)
- Biocompatibility (4)
- Ceramics (4)
- RFA (4)
- Röntgenfluoreszenzanalyse (4)
- Coating (3)
- Drawings (3)
- Recycling (3)
- Silberstiftzeichnung (3)
Organisationseinheit der BAM
Plasma Spreyed Coatings of Calcium Titanium Phosphate - A New Generation of Bioactive Coatings
(1995)
Data and prediction for the mass burning rate of a tert-butyl-peroxy-benzoat (TBPB) pool fire (pool diameter = 3 m) is presented. The mass burning rates of TBPB fires are up to six times higher and less dependent on pool diameter compared to hydrocarbon pool fires caused by an additional heat release rate due to exothermic decomposition reaction in the liquid phase. This heat release rate is calculated using a 1st order reaction kinetic obtained from micro calorimetric measurements. A new model is derived considering the heat release rate due to the decomposition reaction which is shown to be 100 % of the heat release rate radiated to the pool surface. With the presented model, including also physical quantities, especially the limiting fuel concentration for upward flame propagation, it is possible to predict the mass burning rates of large TBPB pool fires. The predicted values are in very good agreement with the experiments.
A kinetic model of smouldering of pine wood is determined by thermo-gravimetric analysis (TGA), describing the reactions of wood pyrolysis, wood oxidation and char oxidation. Thermo-gravimetric experiments were conducted with constant heating rates ranging from 2.5 to 10 K/min in atmospheres of pure nitrogen and mixtures of nitrogen and oxygen (with 20.5%, 8.2% and 4.3% O2). At first wood pyrolysis and char oxidation experiments are carried out in an independent way. Then smouldering experiments are conducted, which combine the two previous reactions with wood oxidation. Finally, the heats of the reactions are determined by differential scanning calorimetry (DSC). The results are discussed, compared with the literature and the derived kinetic model is presented, which includes five components: three pseudo-components of wood – representing roughly cellulose, hemi-cellulose and lignin – as well as char and ashes.