Filtern
Dokumenttyp
Schlagworte
- Radiographie (6)
- Bildqualität (5)
- Digitale Detektoren (4)
- ZfP (4)
- Contrast sensitivity (3)
- Digital detector arrays (3)
- Film replacement (3)
- Filmersatz (3)
- Grenzen der Bildqualität (3)
- Signal/Rausch-Verhältnis (3)
The presently active standards on Computed Radiography (CR) need a major revision. It was observed by many users that the image quality for class B of EN 14784-2 is not achievable under the same exposure conditions as used for film exposure. A mathematical model was developed and tested, which allows the calculation of the image quality, proven by image quality indicators (IQI), depending on the fixed pattern noise and the efficiency of the used imaging plate (IP) scanner system. All tested IP scanner systems provide a fixed correlation between the measured signal/noise ratio (SNR) and the grey values in the digital images. The maximum achievable SNRmax depends on the fixed pattern noise of the plate (high dose limit). Depending on the exposure dose an optimum visibility of IQIs can be predicted by calculation and measured considering the attenuation coefficient for calculation of the contrast/noise ratio (CNR). The diameter of the just visible wire is proportional to 1/sqrt(CNR). The optimum tube voltage for best visibility of IQIs and maximum CNR depend on the exposure dose. The optimum tube voltage for best visibility is achieved only at exposures with high dose. A dose dependant optimal tube voltage was not observed for film radiography.
In den letzten Jahren wird zunehmend über neue Prüftechniken berichtet, die den bisher verwendeten ZfP-Film durch neue digitale Detektoren ersetzen. Dabei werden verschiedene Wege beschritten, um die erforderliche Bildqualität nachzuweisen. Die Motivation zum Filmersatz besteht in einer Kostenreduktion aufgrund kürzerer Belichtungszeiten, dem Wegfall von Verbrauchsmaterialien (der Verzicht auf Entwicklerchemie hat auch ökologische Vorteile), der Verringerung von Archivierungskosten und -raum sowie der Integration in eine rechnergestützte Dokumentation. Neue Kalibrierungs- und Messvorschriften für digitale Detektor-Arrays (DDAs, auch Matrix- oder Flachdetektoren genannt) wurden entwickelt, um das maximal erreichbare Signal/Rausch-Verhältnis (SNR) von DDAs zu bestimmen. Die entwickelten Algorithmen erlauben eine neue Hochkontrastempfindlichkeitstechnik, die eine Kontrastempfindlichkeit von bis zu 1/1000 der durchstrahlten Wanddicke ergibt. Standard-Radiographie mit den besten ZfP-Filmen (Filmklasse C1 nach EN 584-1) ist auf eine Kontrastempfindlichkeit von max. 1/100 der Wanddicke begrenzt. Die erzielbaren Bildqualitäten von ZfPFilm und DDAs werden anhand einer Testschweißnaht verglichen.