Filtern
Dokumenttyp
Referierte Publikation
- nein (6) (entfernen)
Schlagworte
- Aluminium (1)
- Carbon nanofibres (1)
- Carbon nanostructure (1)
- Carbon nanotubes (1)
- Dichlorethane (1)
- Inhibiting activity (1)
- Kinetics (1)
- Magnetic (1)
- Model oxidation (1)
- Oxidation rate (1)
Long-term behaviour of geosynthetic drains - excavations on landfills after up to 12 years service
(2002)
Electron magnetic resonance (EMR) spectroscopy, X-ray-fluorescent microscopy (XFM) and thermal analysis (TGA/DTA) are used to characterize the carbon nano-phase obtained in the reaction between fine-dispersed aluminium and dichlorethane in the liquid paraffin medium and its modified with Mn(II), Fe(III), Ni(II), Cu(II) chlorides forms were studied. It was shown that the solid nano-structured functionalized carbon systems containing metals possess specific magnetic and thermal properties. Key parameters of the process, influencing on the size and structure of the formed carbon nano-phase were determined. Results and regularities established in this work create presumably the certain basis for optimization of physical and chemical properties of similar systems.
Die hochselektive und ausbeutereiche plasmachemische Bromierung von Polyolefinoberflächen wurde auf graphitische Materialien übertragen. Oberflächen von graphenartigem Highly Oriented Pyrolytic Graphite (HOPG), natürlichem Graphit, mehrwandige Kohlenstoffnanoröhren (MWCNT) sowie Kohlenstoff-Fasern wurden im Bromdampfplasma behandelt. Während die Bromierung von Polyolefinoberflächen als radikalische Wasserstoffabstraktion mit nachfolgender Addition (Rekombination) oder durch nucleophile Substitution an sp³-hybridisierten C-Atomen abläuft, können graphitische Strukturen sowohl an sp³-hybridisierten Strukturdefekten als auch durch elektrophile Addition an vollständig C-substituierte aromatische Doppelbindungen bromiert werden. Dabei werden die planaren (graphitischen) sp²-C-Atome in die tetraedrische sp³-Hybridisierung umgewandelt und zu elektrisch nichtleitenden Strukturen gefaltet.
Die maximalen Bromausbeuten bei Verwendung von Brom als Plasmamedium lagen je nach Substrat zwischen 1050% Br/C, mit Bromoform deutlich darüber, was durch Kombinationen von Bromoform mit Brom oder Allylbromid mit Bromoform durch Schichtbildung auf über 70% Br/C gesteigert werden konnte.
An die C-Br-Gruppen wurden nasschemisch verschiedene Amine nucleophil gepfropft. Die Pfropfausbeuten von 110 Moleküle je 100 C lagen deutlich niedriger als die erreichten Pfropfgrade von etwa 122 Moleküle je 100 C-Atome an Polyolefinoberflächen. Da nach der chemischen Pfropfung nahezu alle nichtgepfropften Br-Gruppen verschwunden waren, muss auf eine bevorzugte Rekonstruktion der planaren sp²-Graphitschicht geschlossen werden.
Carbon nanotubes (CNTs) and carbon nanofibers (CNFs) have electron affinities similar to those of fullerenes C60 and C70 and they are therefore capable of acting as radical scavengers in free radical chain reactions, including polymerisation and the thermo-oxidative degradation of polymers. It is assumed that the CNTs and CNFs used as integral part of polymer composites are able to exhibit an antioxidant effect in these materials because of their radical accepting capacity.
To examine this presumption the antioxidative activity of original and purified commercial multiwall carbon nanotube MWCNT and carbon nanofibre of platelet structure CNF-PL has been studied by means of a model oxidation reaction of cumene initiated (2,2'-azobisisobutyronitrile, AIBN) in liquid phase. This model reaction was designed to simulate the thermo-oxidative processes in carbon-chain polymers and allows comparison and transfer of obtained results to a polymer system.
Kinetic measurements of oxidation rates showed that the effect of inhibition for the model oxidative reaction in the presence of the original and purified MWCNT and CNF-PL strongly depends on the presence of metals (Co, Fe) in the nanoparticles. Rates of oxidation Wo2 (CNT;CNF) observed for the unrefined samples are result of the two competing rates - rate of inhibition Winh.(CNT; CNF) caused by structures of the CNT or CNF and the rates of initiation Wi(M) due to the following interaction: ROOH + M (Co;Fe) i.e, Wo2 ~ W inh (CNT;CNF) + Wi(M).
The effective rate constants for the addition of cumyl radicals (R.) to MWCNT and CNF-PL have been determined. These constants reduced to the same concentration (0.5wt.%) and temperature (60°C) units have magnitudes: k1(MWCNT) [MWCNT] = (2.8 ± 0.3) x104 s-1and k1(CNF) [CNF] = (6.0 ± 1.0) x103 s-1. Thus, the effective rate constant, reflecting the antioxidative activity for the CNT, is five times higher than that for the CNF, is about equal to the rate constant for HAS Chimassorb 2020: k1(Chim.2020)[Chim. 2020] = (2.2 ± 0.3) x104 s-1, is ten times less than that for the HAS Chimassorb 119FL: k1(Chim.119FL)[Chim. 119FL] = (2.8 ± 0.3) x105 s-1 and is about forty times less than that for the case of fullerene C60: k1(C60)[C60](353K) = (1.2 ± 0.2) x106 s-1.
The kinetic data obtained specify the level of original antioxidative activity of MWCNTs and CNFs and scope of their rational use in polymer composites. It is believed that the results will be helpful for designing optimal profile of polymer composites filled by the CNT/CNFs.