### Filtern

#### Dokumenttyp

- Posterpräsentation (11)
- Beitrag zu einem Tagungsband (8)
- Vortrag (7)
- Dissertation (1)

#### Referierte Publikation

- nein (27) (entfernen)

#### Schlagworte

#### Organisationseinheit der BAM

Many engineering structures are made of composite materials or metal foam. To simulate the deformational behaviour of these structures often requires a high number of discretisation elements. This in turn yields a very large system of linear equations that are extremely time and memory consuming or practically impossible to solve. It is therefore desirable to find an approach to overcome this obstacle.

The integration of finite element method (FEM) into the least-squares adjustment presented in [1] is further extended for a joint evaluation of an elastostatic model and displacement field measurement. For linear solids which obey the HOOKE's law, the material parameters determination from measurements is being examined. In many literature, see for example [2], parameters are iteratively tuned until the computed FEM results are in accordance with the measurements. In contrast to these debatable approaches, we follow a rigorous and direct method. The “classical” FEM procedure starts with known material constants and ends up with computed fields such as dis-placement or temperature field. We present a method to invert the FEM procedure using the most general least-squares adjustment – the GAUSS-HELMERT Model (GHM). From given fields, the material parameters are directly calculated.

By means of a small-scale truss bridge, the ability of the Measurement- and Model-based Structural Analysis to detect and localize damage was examined. Although there was no noteworthy difficulty in detecting damage, it turned out that damage localization responds sensitively to systematic influences, i.e. non-modelled properties of the mechanical model. Therefore, another experiment is being conducted to re-examine the Measurement- and Model-based Structural Analysis. For this purpose, the bending test is carried out as it has been already theoretically respectively numerically discussed. In this attempt, the systematic influences such as residual stress are kept as low as possible.

To examine the capability to detect and localise damage using the Measurement- and Model-based Structural Analysis (MeMoS), a small-scale truss bridge (1520 mm × 720 mm × 720 mm) made of aluminium profiles is built as a test specimen for this purpose. The truss frame of the test bridge is made of aluminium profiles with a sophisticated design of the cross-sectional area. In comparison, with solid profiles, only a fraction of the material is needed to produce the profiles, while their bending resistance decreases slightly. The profiles are built into a truss frame by connecting them by means of fastening sets made of steel. The bridge model is mounted on four steel bearings which each of them consist of a cylinder arranged between two plates. Fixed bearings are made by holding onto one end of the bridge. The bridge is subjected by an external load by placing a heavy object beneath it. At the same time, measurements can be conducted below the bridge. Therefore, the bridge specimen is elevated by attaching it on a pedestal with four columns. Damages can be induced by loosening the fastening pieces.

The integration of finite element method (FEM) into the least-squares adjustment presented in is further extended for a joint evaluation of an elastostatic model and displacement field measurement. For linear solids which obey the Hooke's law, the material parameters determination from measurements is being examined.