Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (22)
- Deutsch (16)
- Mehrsprachig (1)
Schlagworte
- VOC (11)
- Emissionen (7)
- Emission test chamber (6)
- Blauer Engel (3)
- Emission (3)
- SVOC (3)
- Volatile organic compounds (3)
- Aldehyde (2)
- Construction products (2)
- Copiers (2)
Organisationseinheit der BAM
There has been an increasing use of oriented strand boards (OSBs) for the construction of floors, ceilings and walls of buildings. In Germany and other European countries, OSBs are mainly produced from pine wood (Pinus sylvestris). In response to complaints about the odour and irritation of mucous membranes in connection with the use of OSBs, samples of OSBs were bought from do-it-yourself stores to test their volatile organic compound (VOC) emissions by using emission test chambers. The boards emitted predominantly monoterpenes, aldehydes, acids and acetone. Aldehydes are generated during the production process by the oxidation of unsaturated fatty acids such as linoleic acid. Pine wood, compared with other wood species, contains more unsaturated fatty acids. Of the six acquired OSBs, four boards from three manufacturers would not meet the requirements of the German AgBB (Ausschuss zur gesundheitlichen Bewertung von Bauprodukten, Committee for Health Evaluation of Building Products), mainly because of the emissions of unsaturated aldehydes. These compounds have low LCI values (lowest concentration of interest) and are therefore problematic substances based on a health-related evaluation of building products according to the AgBB scheme.
In diesem Projekt wurde das Prüfverfahren für die chemischen Emissionen zum RAL-UZ 38 überarbeitet. Dabei stand die Bewertung der Prüfkammermessungen mit Hilfe des AgBB-Schemas im Vordergrund. Dafür wurden die Prüfkammerbedingungen angepasst. Mit Hilfe einer Emissionsdatenbasis wurden Anforderungen an die Emissionen der Umweltzeichenprodukte abgeleitet. Die Datenbasis bildeten vorhandene Emissionsdaten der Umweltzeichenprodukte und Messungen aktueller Produkte. Dazu wurden 10 Prüfkammermessungen an unterschiedlichen Möbelplatten durchgeführt. In Zusammenarbeit mit den Lizenznehmern, dem RAL und dem Umweltbundesamt wurde ein neues Verfahren für die Auswahl der Prüfmuster für die Emissionsmessung erarbeitet. Dieses vereinigt eine repräsentative Auswahl mit einer regelmäßigen Nachprüfung einzelner Möbel und/oder Bauteile. Zudem wurden Kriterien für die Überprüfung der Anforderungen an die Herkunft des Holzes aufgestellt. Für Bodenbeläge, Paneele und Türen aus Holz und Holzwerkstoffen für Innenräume wurde eine
neue Vergabegrundlage erschaffen (RAL-UZ 176).
3D-printing or additive manufacturing has many promising and unique advantages. Especially low cost molten polymer Deposition Printers are increasingly populär in the private and educational sector.
Their environmental friendliness can be questioned due to recently reported ultrafine particle and suspected VOC emissions, To further investigate 3D-printing as a potential indoor air pollution source we characterized fine and ultrafine particle emissions from a molten polymer deposition printer producing a 3D object with ten marketable polymer filament materials under controlled conditions in a test chamber. VOC emissions from the filaments have also been compared. Using a straightforward emission model time dependent and averaged particle emission rates were determined. The results indicate that under comparable conditions some filament materials produce mainly ultrafine particles up to an average rate of 1013 per minute. This value is in the upper ränge of typical indoor ultrafine particle sources (e.g. Smoking, frying, candle light, laser printer). The observed material-specific rates differ by five Orders of magnitude. Filament-specific gaseous emissions of organic compounds such as bisphenol A, styrene and others were also detected.
Our results suggest a detailed evaluation of related risks and considering protective measures such as housing and filtering.
Volatile Organic Compounds (VOC) are ubiquitous in the indoor air, since they emit from materials used indoors. Investigations of these materials are mostly carried out in test chambers under controlled climatic conditions. Quality control of these test chamber measurements is important but there is a lack of commercially available homogenous reference materials as required for round robin tests or quality assurance of laboratories. The approach of the present study is the impregnation of a supporting material with VOC, which are reproducibly released in measurable chamber air concentrations under standardised test conditions. A polymer made of Thermoplastic Polyurethane (TPU) was chosen as carrier material. It was impregnated with the VOC trimethyl pentanediol isobutyrat (texanol).
VOC/SVOC-Emissions from materials for flooring installation (primer, screed, adhesive, floor covering) were measured by means of emission test chambers and cells over a time period of at least 28 days at 23 C, 50 % relative humidity and an area specific air flow rate of q = 1.25 m³/m²h. Single components were tested in comparison to three complete structures (same concrete, primer, screed, adhesive) with different types of floor covering (PVC, carpet, linoleum). Sorption into concrete/screed and different sealing by the flooring materials affected the emissions from the complete structures. The complete structures with linoleum and PVC showed the same emissions and emission rates as the flooring materials alone. Emissions from the carpet-covered structure resulted mainly from the lower layers. For two adhesives the formation of secondary emissions (aldehydes and organic acids) was observed starting after the standard testing time of 28 days.
Im vorliegenden Bericht wurden 11 Fußbodenbelagskleber, eine Grundierung, eine Spachtelmasse, 14 Teppiche, 5 PVC-Bodenbeläge, drei Linoleum-Beläge, ein Kautschukbelag und ein Polyolefinbelag über einen Zeitraum von mindestens 28 Tagen mittels Prüfkammer- bzw. Prüfzellenmessung auf ihr Emissionsverhalten untersucht. Die Emissionsmessungen an den Einzelmaterialien Kleber und Bodenbelag sollten die möglichen Emissionen (Substanzen und Konzentrationen) und deren zeitlichen Verlauf ermitteln. Außerdem wurden die Emissionen aus 7 Materialkombinationen ermittelt. Dazu gerhörten drei Komplettaufbauten aus Estrich, Grundierung, Spachtelmasse und Kleber mit den Belägen Teppich, PVC und Linoleum sowie 4 Verbundsysteme. Dies waren: Verbundsystem Estrich/Grundierung/Spachtelmasse/Kleber, Verbundsystem Glasplatte/Kleber/Teppich, Verbundsystem Glasplatte/Kleber/PVC-Belag und das Verbundsystem Estrich/Kleber. Die Emissionen aus den Komplettbauten wueden durch Sorptionseffekte und durch die unterschiedliche Durchlässigkeit der Bodenbeläge beeinflusst. Dabei waren die Emissionen aus den Komplettaufbauten und Verbundsystemen jeweils geringer als die Summe der Emissionen der entsprechenden Einzelmaterialien. Ergänzende Untersuchungen wurden durchgeführt zur Vergleichbarkeit der Emissionsmessungen in unterschiedlichen Prüfkammern (Volumen 1 m3 und 0,02 m3) bzw. Messzellen(Volumen 1 l und 0,035 l [FLEC]). und bei 42 Klebern zur Anwendbarkeit der Direkt-Thermodesorption (dynamische Headspace-Methode) als Screening-Verfahren. Des weiteren wurden Versuche durchgeführt, um die Auswirkungen unterschiedlicher Probenherstellung (Trägermaterial, Auftragsmenge, Auftragsart) auf die Emissionen aus den Fußbodenklebern abschhätzen können. Die durchgeführten Untersuchungen stellen eine Grundlage zur Erarbeitung eines Umweltzeichens für Fußbodenkleber dar.