Filtern
Dokumenttyp
Schlagworte
- Plasma bromination (2)
- Adhesion promotion (1)
- Carbon fiberepoxy resin laminates (1)
- Electrospray ionization (ESI) (1)
- Functional groups (1)
- Grafting (1)
- Layer topography (1)
- Macromolecular plasma (1)
- Monotype functional groups (1)
- Plasma (1)
The production of chemically-defined plasma polymers and the introduction of monotype functional groups onto polymer surfaces are described. One method is to lower the energetic level of low-pressure plasmas. Pressure- and plasma-pulsed plasmas were successfully tested for the production of chemically-defined plasma polymers by increasing the monomer supply during the plasma-off period. Well-defined ultra-thin polymer films with regular structure were deposited from atmospheric plasmas by electrospray techniques. Post-plasma wet-chemical processing was also applied, as were gas/liquid-based aerosols and underwater plasmas.
Plasma-chemical bromination has been shown to be well-suited for highly selective and efficient C–Br-functionalization of polyolefin surfaces and has now been applied to graphitic materials, including highly oriented pyrolytic graphite (HOPG), natural graphite, carbon nanotubes, and graphitized carbon fibres. In contrast to the radical substitution of hydrogen by bromine at hydrogen-terminated sp3-hybridized carbon, bromination of all-carbon bound sp2-hybridized carbon in graphene requires addition to aromatic double bonds. The related change of sp2 to sp3 hybridization of the carbon atoms involved helps to explain experimental results of a loss in surface planarity on brominated HOPG. Bromine concentrations of up to 50 bromine atoms per 100 C-atoms were achieved in elemental bromine vapour under low-pressure plasma conditions using low-energetic inductively coupled radio-frequency plasma excitation. The time scale of the bromination progress was found to increase with the specific surface area of the material. The results of plasma-chemical bromination are compared to that of wet-chemical electrophilic addition reactions, which achieved 28 Br per 100 C for MWCNT. The resulting C–Br bonds from plasma-chemical processing of graphitic materials were shown to be well-suited for hydroxyl functionalization and for grafting of organic molecules by nucleophilic substitution with 1,6-diaminohexane and (3-aminopropyl)triethoxysilane.
Die hochselektive und ausbeutereiche plasmachemische Bromierung von Polyolefinoberflächen wurde auf graphitische Materialien übertragen. Oberflächen von graphenartigem Highly Oriented Pyrolytic Graphite (HOPG), natürlichem Graphit, mehrwandige Kohlenstoffnanoröhren (MWCNT) sowie Kohlenstoff-Fasern wurden im Bromdampfplasma behandelt. Während die Bromierung von Polyolefinoberflächen als radikalische Wasserstoffabstraktion mit nachfolgender Addition (Rekombination) oder durch nucleophile Substitution an sp³-hybridisierten C-Atomen abläuft, können graphitische Strukturen sowohl an sp³-hybridisierten Strukturdefekten als auch durch elektrophile Addition an vollständig C-substituierte aromatische Doppelbindungen bromiert werden. Dabei werden die planaren (graphitischen) sp²-C-Atome in die tetraedrische sp³-Hybridisierung umgewandelt und zu elektrisch nichtleitenden Strukturen gefaltet.
Die maximalen Bromausbeuten bei Verwendung von Brom als Plasmamedium lagen je nach Substrat zwischen 1050% Br/C, mit Bromoform deutlich darüber, was durch Kombinationen von Bromoform mit Brom oder Allylbromid mit Bromoform durch Schichtbildung auf über 70% Br/C gesteigert werden konnte.
An die C-Br-Gruppen wurden nasschemisch verschiedene Amine nucleophil gepfropft. Die Pfropfausbeuten von 110 Moleküle je 100 C lagen deutlich niedriger als die erreichten Pfropfgrade von etwa 122 Moleküle je 100 C-Atome an Polyolefinoberflächen. Da nach der chemischen Pfropfung nahezu alle nichtgepfropften Br-Gruppen verschwunden waren, muss auf eine bevorzugte Rekonstruktion der planaren sp²-Graphitschicht geschlossen werden.
Thin coatings of poly(acrylic acid) (PAA) and poly(hydroxyethylmethacrylate) (PHEMA) were deposited onto carbon fibers by means of the electrospray ionization (ESI) technique in ambient air. These high-molecular weight polymer layers were used as adhesion promoters in carbon fiberepoxy resin composites. Within the ESI process, the carbon fibers were completely enwrapped with polymer in the upper 10 plies of a carbon fiber roving. As identified with scanning electron microscopy also shadowed fibers in a bundle as well as backsides of fiber rovings were pinhole-free coated with polymers (electrophoretic effect'). Under the conditions used, the layers have a granular structure. Residual solvent was absent in the deposit. PAA and PHEMA films did not show any changes in composition and structure in comparison with the original polymers as analyzed by X-ray photo-electron spectroscopy and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Single-fiber pullout tests of coated fibers embedded in epoxy resin showed significantly increased interfacial shear strength. It is assumed that chemical bonds between carbon fiber poly(acrylic acid) and epoxy resin contribute significantly to the improved interactions.