Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (72)
Sprache
- Englisch (70)
- Deutsch (1)
- Mehrsprachig (1)
Referierte Publikation
- ja (72) (entfernen)
Schlagworte
- ELISA (12)
- Mass spectrometry (7)
- Affinity chromatography (6)
- Lab-on-a-chip (6)
- Nitrotyrosine (6)
- Antibody (5)
- Fluorescence (5)
- Immunoassay (5)
- LC-MS/MS (5)
- Tyrosine (5)
- Air pollution (4)
- HPLC (4)
- Metrology (4)
- Nitration (4)
- Reference material (4)
- Allergy (3)
- Amino acid analysis (3)
- Biosensor (3)
- Biosensors (3)
- Caffeine (3)
- Immunoassays (3)
- Monoclonal antibody (3)
- Nitrogen oxides (3)
- PCR (3)
- Peptides (3)
- Phenylalanine (3)
- Quality control (3)
- Reproducibility (3)
- Screening (3)
- Terrorism (3)
- Traceability (3)
- AAA (2)
- Affinity extraction (2)
- Albumin (2)
- Animal species differentiation (2)
- Aromatic amino acid analysis (2)
- BSA (2)
- Biochip (2)
- Biophotonics (2)
- Carbamazepine (2)
- Carrier protein (2)
- Chromatography (2)
- Combinatorial chemistry (2)
- Copper (2)
- Degradation (2)
- Diagnostics (2)
- Dimer (2)
- Dityrosine (2)
- Documentation (2)
- Explosives detection (2)
- Fish species (2)
- Fluoreszenz (2)
- HTS (2)
- Hapten (2)
- Hybridoma (2)
- Hydrolysis (2)
- IgG (2)
- Immunogen (2)
- LAMP (2)
- MALDI (2)
- Magnetic resonance imaging (2)
- Microarray (2)
- Microfluidics (2)
- Miniaturization (2)
- Mobile phase (2)
- Monolithic column (2)
- Multiplexing (2)
- Nickel (2)
- Open Science (2)
- Optical sensors (2)
- Oxidation (2)
- Ozone (2)
- Peptide (2)
- Peptide library (2)
- Permethrin (2)
- Photonic sensors (2)
- Protein (2)
- Protein nitration (2)
- Quality Control (2)
- Quantitative protein analysis (2)
- Reference materials (2)
- Ring resonator (2)
- SBA-15 (2)
- SPR (2)
- Sapphire (2)
- Security (2)
- Sequence coverage (2)
- Sequencing (2)
- Silanization (2)
- Silicon photonics (2)
- Synthetic peptides (2)
- TATP (2)
- Tryptophan (2)
- Validation (2)
- immunoassay (2)
- 150th anniversary (1)
- 150th anniversary of BAM (1)
- 2,5-dihydroxyacetophenone (1)
- 280 nm (1)
- 3R concept (1)
- 6xHis (1)
- AAAA (1)
- ABC (1)
- ABID (1)
- ADC (1)
- ATCUN (1)
- Aautomatisation (1)
- Absorption (1)
- Acute myocardial infarction (1)
- Additive Manufacturing (1)
- Adhesion (1)
- Adhesives (1)
- Adjuvantien (1)
- Adsorption (1)
- Aeroallergens (1)
- Affinity (1)
- Affinity Chromatography (1)
- Affinity Extraction (1)
- Affinity Separation (1)
- Affinity immobilization (1)
- Aflatoxin (1)
- Air filter samples (1)
- Air particulate matter (1)
- Air-segmented flow (1)
- Airport (1)
- Alanine scan (1)
- Algal toxins (1)
- Allergene (1)
- Allergie (1)
- Aluminum oxide (1)
- Ambient ionization (1)
- Amplification (1)
- Analysis (1)
- Analytical sciences (1)
- Anatoxin-a (1)
- Anatoxin-a(s) (1)
- Animal welfare (1)
- Anthropocene (1)
- Anthropogenic markers (1)
- Antibodies (1)
- Antibody Purification (1)
- Antibody antigen complex (1)
- Antibody drug conjugate (1)
- Antibody identification (1)
- Antibody quality (1)
- Antibody-gated indicator delivery (1)
- Antibody-gated indicator delivery systems (1)
- Antigen (1)
- Array (1)
- Atmospheric aerosol (1)
- Augenbohne (1)
- Automated Purification (1)
- Aviation (1)
- BAM (1)
- BCA test (1)
- BODIPY-Farbstoffe (1)
- Back-side integration (1)
- Bacterial lysates (1)
- Basic solvent (1)
- Benchmarking study (1)
- Benzene-1,3,5-tricarboxylic acid (1)
- Bet v 1 (1)
- Betula pendula (1)
- Binder (1)
- Binding molecule (1)
- Binding strength (1)
- Bio-interaction (1)
- Bioanalysis (1)
- Biochemistry (1)
- Bioconjugate (1)
- Bioinformatics (1)
- Bioluminescence (1)
- Biomarker (1)
- Biosensing (1)
- Biosensor development (1)
- Bioseparation (1)
- Biotechnology (1)
- Biotoxins (1)
- Birch pollen allergen (1)
- Block copolymer (1)
- Blue-green algae (1)
- Bombs (1)
- Borosilicate Glass (1)
- Bovine serum albumin (1)
- Bovine serum albumin (BSA) (1)
- Bradford (1)
- Bundesanstalt für Materialforschung und -prüfung (1)
- Byproducts (1)
- COVID-19 (1)
- Calibration (1)
- Carbamazepin (1)
- Cardiac troponin (1)
- Cardiovascular (1)
- Carrier (1)
- Carrier load (1)
- Certified reference materials (1)
- Cetirizin (1)
- Cetirizine (1)
- Chelate (1)
- Chemical evolution (1)
- Chemical protein modification (1)
- Chemiluminescence (1)
- Chemosensor (1)
- Chicken antibodies (1)
- Chip (1)
- Chirality (1)
- Chronic kidney disease (1)
- Citation (1)
- Citizen Science (1)
- Cleavage (1)
- Click chemistry (1)
- Click reaction (1)
- Clone M2 (1)
- Collection (1)
- Column holder (1)
- Combinatorial peptide library (1)
- Combinatorial polymer libraries (1)
- Combustion (1)
- Commercialization (1)
- Compartmentalization (1)
- Competitive immunoassay (1)
- Compound-independent calibration (1)
- Concentration step (1)
- Conformation (1)
- Conjugates (1)
- Conjugation density (1)
- Conjugation ratio (1)
- Construction (1)
- Continuous Sensor (1)
- Contrast agent (1)
- Coproantibodies (1)
- Corona virus (1)
- Corundum (1)
- Cross-linking (1)
- Cyanotoxins (1)
- Cylindrospermopsin (1)
- Cytochrome P450 CYP1A2 (1)
- Cytoplasm (1)
- DAMP (1)
- DAR (1)
- DHAP (1)
- DNA chip (1)
- DNA-Chip (1)
- Damage-associated molecular patterns (DAMPs) (1)
- De novo peptide sequencing (1)
- Deep learning-based tools (1)
- Dendrimer (1)
- Derivatization (1)
- Diagnosis (1)
- Diagnostic Antibodies (1)
- Diesel (1)
- Diesel exhaust (1)
- Digital PCR (1)
- Digital immunoassay (1)
- Digitale PCR (1)
- Dimerization (1)
- Dissociation constant (1)
- Dityrosine crosslinking (1)
- Docking (1)
- Down Stream Processing (1)
- Downstream processing (1)
- Drug (1)
- Drug discovery (1)
- Drug transporters (1)
- Drug-to-antibody ratio (1)
- EDTAD (1)
- ELISA methods (1)
- ESI MS (1)
- Editorial (1)
- Elastin-specific contrast agent ESMA (1)
- Element Specific Bioimaging Using Laser Ablation (1)
- Emergency (1)
- Enantiomeric excess ee (1)
- Encapsulation (1)
- Enhancement (1)
- Environment (1)
- Environmental analysis (1)
- Environmental monitoring (1)
- Environmental pollutants (1)
- Enzyme-linked immunosorbent assay (1)
- Epoxy (1)
- Equilibrium constant (1)
- Error correction (1)
- Escherichia coli (1)
- Ethylenediaminetetraacetic acid (1)
- Etofenprox (1)
- Exhaust (1)
- Experiment (1)
- Explosive (1)
- FLAG peptide (1)
- FPLC (1)
- Farbstoffe (1)
- Feces (1)
- Fischarten (1)
- Flow injection immunoassay (1)
- Fluorescence label (1)
- Folding chirality (1)
- Formulation additives (1)
- Fragmentation (1)
- Functionalization (1)
- Gadofosveset (1)
- Gadolinium-based contrast agent (1)
- Gadovist (1)
- Gated hybrid material (1)
- Gated materials (1)
- Github (1)
- Glass Support (1)
- Glue (1)
- Glutaraldehyde (1)
- Glycidylethers (1)
- Grass pollen (1)
- HPLC-DAD (1)
- Hapten immunoassay (1)
- Harmful algal blooms (1)
- Hay fever (1)
- Heart attack (1)
- Heavy chains (1)
- Heterologous hapten (1)
- HexaHis-Tag (1)
- High pH (1)
- High-Speed (1)
- High-Speed Separations (1)
- High-throughput (1)
- His6 (1)
- His8 (1)
- Histidine (1)
- Human Plasma (1)
- Hybridisierung (1)
- Hydrochloric acid (1)
- Hydroxyl radicals (1)
- IC50 (1)
- IMAC purification (1)
- Identity (1)
- IgE (1)
- IgG determination (1)
- IgY (1)
- Iinductively coupled plasma mass spectrometry (1)
- Immunization monitoring (1)
- Immunoaffinity extraction (1)
- Immunocapture (1)
- Immunochemical response optimization (1)
- Immunoglobulin E (1)
- Immunoglobulins (1)
- Immunometric assay (1)
- Immunometric biosensor (1)
- Immunosensor (1)
- Impact (1)
- Impurites (1)
- Inductively Coupled Mass Spectroscopy (1)
- Inflammation (1)
- Inhibition (1)
- Insecticide (1)
- Interlaboratory studies (1)
- Internal standard (1)
- Iron disorders (1)
- Isotope dilution (1)
- Jahrestag (1)
- Kjeldahl (1)
- Klimaveränderung (1)
- Kreuzreaktivität (1)
- LC-MS (1)
- LC-UV absorbance (1)
- LCMSMS (1)
- LIF (1)
- Lab-on-a-Chip (1)
- Lab-on-chip (1)
- Label (1)
- Laborvergleichuntersuchungen (1)
- Ladder sequencing (1)
- Ladungstransfer (1)
- Lanthanide DOTA (1)
- Lanthaniden (1)
- Laser (1)
- Laser-induced fluorescence (1)
- Laser-induced plasma (1)
- Lateral flow assay (1)
- Lateral flow test (1)
- Lead identification (1)
- Library (1)
- Life sciences (1)
- Light chain (1)
- Light chains (1)
- Limit of detection (1)
- Linker (1)
- Liquid chromatography (1)
- Liver function tests (1)
- Low-cost (1)
- Luftverschmutzung (1)
- Luminol (1)
- MALDI-TOF (1)
- MALDI-TOF MS (1)
- MR Angiography (1)
- MST (1)
- Macroporous polymers (1)
- Mass Spectrometry (1)
- Massenspektrometrie (1)
- Material sciences (1)
- Material-binding Peptides (1)
- Mechanism (1)
- Mesoporous particles (1)
- Mesoporöse Materialien (1)
- Metal labeling (1)
- Metall-Markierung (1)
- Metalloprotein (1)
- Method (1)
- Microarrays (1)
- Microcystins (1)
- Microfluidic mixing (1)
- Microfluidic system (1)
- Micrometeorites (1)
- Microresonator (1)
- Microwave (1)
- Milch (1)
- Miller and Urey (1)
- Missing fragmentation sites (1)
- Molecular-MRI (1)
- Molekularbiologie (1)
- Monoclonal Antibodies (1)
- Monoclonal Antibody (1)
- Monoclonal antibodies (1)
- Monolith (1)
- Multiplex (1)
- Multiplex methods (1)
- Murchison meteorite (1)
- Mycotoxin (1)
- NHS (1)
- NHS-Ester (1)
- NIR-Farbstoffe (1)
- NIST (1)
- NIST-mAb 8671 (1)
- Nanocarrier (1)
- Nanoparticle (1)
- Nanoparticles (1)
- Nanophotonics (1)
- Nanoscience (1)
- Natural products (1)
- Neoallergen (1)
- Neoepitopes (1)
- Nickel chelate (1)
- Nitrogen dioxide (1)
- Nodularins (1)
- Nonspecific binding (NSB) (1)
- Nucleocapsid (1)
- OBOC library (1)
- Oligomer (1)
- Oligomerization (1)
- On-chip screening (1)
- One-bead-one-compound library (1)
- Online biosensor (1)
- Online detection (1)
- Open science (1)
- Optical detection (1)
- Optoelectronic (1)
- Orbitrap (1)
- Organic peroxides (1)
- Oriented immobilization (1)
- Ortho-Phthalaldehyde (1)
- Ovalbumin (1)
- Ozon (1)
- PALM (1)
- PEG (1)
- PIC technology (1)
- Partikel (1)
- Pattern recognition receptor (1)
- Peer review (1)
- Peptide Library (1)
- Peptide analysis (1)
- Peptide aptamers (1)
- Peptide binder (1)
- Peptide folding (1)
- Peptide library screening (1)
- Peptide losses (1)
- Peptide mass fingerprinting (1)
- Peroxidase (1)
- Pesticide (1)
- Pflanzenvirus (1)
- Pharmaceutical (1)
- Pharmaceuticals (1)
- Phenothrin (1)
- Phenylketonuria (1)
- Phl p 5 (1)
- Phleum pratense (1)
- Photonic biosensor (1)
- Plant virus (1)
- Plastics (1)
- Point of inflection (1)
- Polishing (1)
- Pollen (1)
- Pollen extract (1)
- Pollutant (1)
- Polyclonal Antibodies (1)
- Polyethers (1)
- Polyethylene glycol (1)
- Polyglycerol (1)
- Polymer-binding Peptides (1)
- Polymers (1)
- Polypropylene (1)
- Porous rock (1)
- Prebiotic chemistry (1)
- Precision polymer sequencing (1)
- Preprocessing (1)
- Primer (1)
- Primordial soup (1)
- Protein A (1)
- Protein Purification (1)
- Protein analysis (1)
- Protein conjugation (1)
- Protein content (1)
- Protein degradation (1)
- Protein folding (1)
- Protein hydrolysis (1)
- Protein nitration degree (1)
- Protein oligomer analysis (1)
- Protein oligomerization (1)
- Protein oligomers (1)
- Protein quantification (1)
- Protein test (1)
- Protein-Quantifizierung (1)
- Proteinoid (1)
- Proteins (1)
- Proteomics (1)
- Pseudo peptides (1)
- Purification (1)
- Purity (1)
- Pyrethroid (1)
- QC (1)
- Quality assurance (1)
- Qualitätskontrolle (1)
- Quantitative proteomics (1)
- RBD (1)
- Racemate (1)
- Reagenzien (1)
- Real-time measurement (1)
- Recombinant Antibody (1)
- Recombinant antibody (1)
- Recombinant protein (1)
- Recovery (1)
- References (1)
- Referenzmaterialien (1)
- Regeneration (1)
- Reinheitsbestimmung (1)
- Replication (1)
- Replication crisis (1)
- Reproducibility crisis (1)
- Resonance wavelength shift (1)
- Ring resonators (1)
- Robustness (1)
- Round robin exercise (1)
- SBA-16 (1)
- SI traceability (1)
- Saliva (1)
- Saxitoxins (1)
- Schlangenbohne (1)
- Schnellmethoden (1)
- Scientific publication (1)
- Segregation (1)
- Self-assembled monolayers (SAM) (1)
- Self-assembly (1)
- Semtex (1)
- Sensor (1)
- Sequence-defined oligomer (1)
- Sequencing algorithm (1)
- Signal amplification (1)
- Single molecule (1)
- Sintered Material (1)
- Size exclusion chromatography (1)
- Smartphone readout device (1)
- Software (1)
- Solid-binding Peptides (1)
- Solid-phase extraction (SPE) (1)
- Solubilizer (1)
- Special issue (1)
- Spike protein (1)
- Sprengstoffe (1)
- Stable isotope labeling (1)
- Standardisation (1)
- Standardisierung (1)
- Standardverfahren (1)
- Stickoxide (1)
- Structure (1)
- Sulfo-NHS (1)
- Sulfur (1)
- Surface Activation (1)
- Surface chemistry (1)
- Surface plasmon resonance (1)
- Surface water (1)
- Surface-plasmon resonance (1)
- Surrogate citations (1)
- TLR4 activation (1)
- Target (1)
- Terephthalic acid (1)
- Test midpoint (1)
- Test strip analysis (1)
- Tetranitromethane (1)
- Therapeutic Antibodies (1)
- Tholins (1)
- Toll-like receptor 4 (1)
- Topical collection: Analytical Methods and Applications in the Materials and Life Sciences (1)
- Toxicity (1)
- Toxicity test (1)
- Triacetone triperoxide (1)
- Trimer (1)
- Tripeptides (1)
- Trust (1)
- Tryptic digest (1)
- Type-I pyrethroids (1)
- Ultrasensitive (1)
- Upscaling (1)
- Vibrio fischeri (1)
- Vigna unguiculata (1)
- Visualization (1)
- Wastewater marker (1)
- Water (1)
- Waveguide (1)
- Wipe test (1)
- Zenodo (1)
- antibody (1)
- bioisosteric replacement (1)
- cross-reactivity (1)
- explosives (1)
- hapten (1)
- irreproducibility (1)
- ligand binding assay (1)
- monoclonal antibody (1)
- non-specific binding (1)
- pH-Abhängigkeit (1)
- paper retraction (1)
- peer reviewimmunochemistry (1)
- quality control (1)
- replication (1)
- reproducibility crisis (1)
- security (1)
- selectivity (1)
- self-replication (1)
- terrorism (1)
Organisationseinheit der BAM
- 1 Analytische Chemie; Referenzmaterialien (41)
- 1.5 Proteinanalytik (41)
- 1.1 Anorganische Spurenanalytik (6)
- 1.9 Chemische und optische Sensorik (6)
- 6 Materialchemie (6)
- 6.3 Strukturanalytik (5)
- 1.8 Umweltanalytik (4)
- 1.4 Prozessanalytik (2)
- 1.7 Organische Spuren- und Lebensmittelanalytik (2)
- VP Vizepräsident (2)
- VP.1 eScience (2)
- 1.0 Abteilungsleitung und andere (1)
- 1.2 Biophotonik (1)
- 1.3 Instrumentelle Analytik (1)
- 4 Material und Umwelt (1)
- 4.2 Material-Mikrobiom Wechselwirkungen (1)
- 6.7 Materialsynthese und Design (1)
- P Präsident (1)
- PST Präsidiale Stabsstelle (1)
In the field of animal species differentiation, work on standardizing methods has been intensified in Germany in recent years, not least due to the horsemeat scandal in 2013. Even though there are now hardly ever any positive findings anymore in examinations to detect horse adulterations in foods such as lasagne, animal species differentiation altogether ranks high in detecting adulteration of foods. This article, therefore, summarises the current status of analytical techniques used in Germany with standardization at German level. It has been established by the working group "Biochemical and Molecular Biological Analytics" of the Lebensmittelchemische Gesellschaft (Food Chemistry Society within the German Chemical Society) with support of experts in the working group “Molecular biology techniques for differentiating plant and animal species" (§64 of the German Food and Feed Code - LFGB) and the "Immunology and molecular biology" task force of the food hygiene and food of animal origin working group (ALTS), both from Germany.
Hepcidin-25 was identified as the main iron regulator in the human body, and it by binds to the sole iron-exporter ferroportin. Studies showed that the N-terminus of hepcidin is responsible for this interaction, the same N-terminus that encompasses a small copper(II)-binding site known as the ATCUN (amino-terminal Cu(II)- and Ni(II)-binding) motif. Interestingly, this copper-binding property is largely ignored in most papers dealing with hepcidin-25. In this context, detailed investigations of the complex formed between hepcidin-25 and copper could reveal insight into its biological role. The present work focuses on metal-bound hepcidin-25 that can be considered the biologically active form. The first part is devoted to the reversed-phase chromatographic separation of copper-bound and copper-free hepcidin-25 achieved by applying basic mobile phases containing 0.1% ammonia. Further, mass spectrometry (tandem mass spectrometry (MS/MS), high-resolution mass spectrometry HRMS)) and nuclear magnetic resonance (NMR) spectroscopy were employed to characterize the copper-peptide. Lastly, a three-dimensional (3D)model of hepcidin-25with bound copper(II) is presented. The identification of metal complexes and potential isoforms and isomers, from which the latter usually are left undetected by mass spectrometry, led to the conclusion that complementary analytical methods are needed to characterize a peptide calibrant or reference material comprehensively. Quantitative nuclear magnetic resonance (qNMR), inductively-coupled plasma mass spectrometry (ICP-MS), ion-mobility spectrometry (IMS) and chiral amino acid analysis (AAA) should be considered among others.
Homochirality is an obvious feature of life on Earth. On the other hand, extraterrestrial samples contain largely racemic compounds. The same is true for any common organic synthesis. Therefore, it has been a perplexing puzzle for decades how these racemates could have formed enantiomerically enriched fractions as a basis for the origin of homochiral life forms. Numerous hypotheses have been put forward as to how preferentially homochiral molecules could have formed and accumulated on Earth. In this article, it is shown that homochirality of the abiotic organic pool at the time of formation of the first self-replicating molecules is not necessary and not even probable. It is proposed to abandon the notion of a molecular ensemble and to focus on the level of individual molecules. Although the formation of the first self-replicating, most likely homochiral molecule, is a seemingly improbable event, on a closer look, it is almost inevitable that some homochiral molecules have formed simply on a statistical basis. In this case, the non-selective leap to homochirality would be one of the first steps in chemical evolution directly out of a racemic “ocean”. Moreover, most studies focus on the chirality of the primordial monomers with respect to an asymmetric carbon atom. However, any polymer with a minimal size that allows folding to a secondary structure would spontaneously lead to asymmetric higher structures (conformations). Most of the functions of these polymers would be influenced by this inherently asymmetric folding. Furthermore, a concept of physical compartmentalization based on rock nanopores in analogy to nanocavities of digital immunoassays is introduced to suggest that complex cell walls or membranes were also not required for the first steps of chemical evolution. To summarize, simple and universal mechanisms may have led to homochiral self-replicating systems in the context of chemical evolution. A homochiral monomer pool is deemed unnecessary and probably never existed on primordial Earth.
The illegal use of explosives by terrorists and other criminals is an increasing issue in public spaces, such as airports, railway stations, highways, sports venues, theaters, and other large buildings. Security in these environments can be achieved by different means, including the installation of scanners and other analytical devices to detect ultra-small traces of explosives in a very short time-frame to be able to take action as early as possible to prevent the detonation of such devices. Unfortunately, an ideal explosive detection system still does not exist, which means that a compromise is needed in practice. Most detection devices lack the extreme analytical sensitivity, which is nevertheless necessary due to the low vapor pressure of nearly all explosives. In addition, the rate of false positives needs to be virtually zero, which is also very difficult to achieve. Here we present an immunosensor system based on kinetic competition, which is known to be very fast and may even overcome affinity limitation, which impairs the performance of many traditional competitive assays. This immunosensor consists of a monolithic glass column with a vast excess of immobilized hapten, which traps the fluorescently labeled antibody as long as no explosive is present. In the case of the explosive 2,4,6-trinitrotoluene (TNT), some binding sites of the antibody will be blocked, which leads to an immediate breakthrough of the labeled protein, detectable by highly sensitive laser-induced fluorescence with the help of a Peltier-cooled complementary metal-oxide-semiconductor (CMOS) camera. Liquid handling is performed with high-precision syringe pumps and chip-based mixing-devices and flow-cells. The system achieved limits of detection of 1 pM (1 ppt) of the fluorescent label and around 100 pM (20 ppt) of TNT. The total assay time is less than 8 min. A cross-reactivity test with 5000 pM solutions showed no signal by pentaerythritol tetranitrate (PETN), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX). This immunosensor belongs to the most sensitive and fastest detectors for TNT with no significant cross-reactivity by non-related compounds. The consumption of the labeled antibody is surprisingly low: 1 mg of the reagent would be sufficient for more than one year of continuous biosensor operation.
Chemical modifications such as nitration and cross-linking may enhance the allergenic potential of proteins. The kinetics and mechanisms of the underlying chemical processes, however, are not yet well understood. Here, we present a size-exclusion chromatography/spectrophotometry method (SEC-HPLC-DAD) that allows a simultaneous detection of mono-, di-, tri-, and higher protein oligomers, as well as their individual nitration degrees (NDs). The ND results of proteins from this new method agree well with the results from an alternative well-established method, for the analysis of tetranitromethane (TNM)- and nitrogen dioxide and ozone (NO2/O3)-nitrated protein samples. Importantly, the NDs for individual oligomer fractions can be obtained from the new method, and also, we provide a proof of principle for the calculation of the concentrations for individual protein oligomer fractions by their determined NDs, which will facilitate the investigation of the kinetics and mechanism for protein tyrosine nitration and cross-linking.
A new type of biodetector was designed based on a bioluminescence test with the bacterium Vibrio fischeri performed in a liquid continuous flow-through system. Here we describe the modification of a commercial tube luminescence detector to work in the flow mode by building a new flow cell holder and a new case including top cover to connect the flow cell with the waste and the incubation capillary in a light-proof manner. As different samples were injected successively it was necessary to keep the individual peaks separated. This was done using an air-segmented flow in the reaction coil. To afford fast screening, the incubation time of the sample and the Vibrio fischeri, which equaled the dead time of the detection system, was set at 5.6 min. Rapid monitoring of toxic substances is achieved by using 20 µL of sample and flow-rates of 110150 µL min-1. As a proof-of-principle, we show results for the detection of five selected di-, tri- and tetrachlorophenols at different concentrations varying from 1 to 200 mg L-1. Calculation of inhibition rates and EC50 values were performed and compared with corresponding values from the DIN EN ISO 11348-2 microplate format. Compared with the latter, the inhibition rates obtained with our flow-through biodetector for the compounds tested were generally about twofold lower, but importantly, a much faster detection is possible.
Besides protein identification via mass spectrometric methods, protein and peptide quantification has become more and more important in order to tackle biological questions. Methods like differential gel electrophoresis or enzyme-linked immunosorbent assays have been used to assess protein concentrations, while stable isotope labeling methods are also well established in quantitative proteomics. Recently, we developed metalcoded affinity tagging (MeCAT) as an alternative for accurate and sensitive quantification of peptides and
proteins. In addition to absolute quantification via inductively coupled plasma mass spectrometry, MeCAT also enables sequence analysis via electrospray ionization tandem mass spectrometry. In the current study, we developed a new labeling approach utilizing an iodoacetamide MeCAT reagent (MeCAT-IA). The MeCAT-IA approach shows distinct advantages over the previously used MeCAT with maleinimide reactivity such as higher labelling efficiency and the lack of diastereomer formation during labeling. Here, we present a careful characterization of this new method focusing on the labeling process, which yields complete tagging with an excess of reagent of 1.6 to 1, less complex chromatographic behavior, and fragmentation characteristics of the tagged peptides using the iodoacetamide MeCAT reagent.
CMOS-Compatible Silicon Photonic Sensor for Refractive Index Sensing Using Local Back-Side Release
(2020)
Silicon photonic sensors are promising candidates for lab-on-a-chip solutions with versatile applications and scalable production prospects using complementary metal-oxide semiconductor (CMOS) fabrication methods. However, the widespread use has been hindered because the sensing area adjoins optical and electrical components making packaging and sensor handling challenging. In this work, a local back-side release of the photonic sensor is employed, enabling a separation of the sensing area from the rest of the chip. This approach allows preserving the compatibility of photonic integrated circuits in the front-end of line and metal interconnects in the back-end of line. The sensor is based on a micro-ring resonator and is fabricated on wafer-level using a CMOS technology. We revealed a ring resonator sensitivity for homogeneous sensing of 106 nm/RIU.
The employment of type-I pyrethroids for airplane disinfection in recent years underlines the necessity to develop sensing schemes for the rapid detection of these pesticides directly at the point-of-use. Antibody-gated indicator-releasing materials were thus developed and implemented with test strips for lateral-flow assay-based analysis employing a smartphone for readout. Besides a proper matching of pore sizes and gating macromolecules, the functionalization of both the material's outer surface as well as the strips with PEG chains enhanced system performance. This simple assay allowed for the detection of permethrin as a target molecule at concentrations down to the lower ppb level in less than 5 minutes.
Set them free: Brightly fluorescent indicators that are loaded into mesoporous silica nanoparticle carriers, capped with bulky antibodies, are released into the lateral flow of a test strip upon analyte arrival. Integration of the system into a rapid, simple flow test with fluorescence readout is applied for the selective and sensitive determination of the presence of triacetone triperoxide (TATP) as a prototype small-molecule analyte (see figure).
MALDI-TOF-MS-Based Identification of Monoclonal Murine Anti-SARS-CoV-2 Antibodies within One Hour
(2022)
During the SARS-CoV-2 pandemic, many virus-binding monoclonal antibodies have been developed for clinical and diagnostic purposes. This underlines the importance of antibodies as universal bioanalytical reagents. However, little attention is given to the reproducibility crisis that scientific studies are still facing to date. In a recent study, not even half of all research antibodies mentioned in publications could be identified at all. This should spark more efforts in the search for practical solutions for the traceability of antibodies. For this purpose, we used 35 monoclonal antibodies against SARS-CoV-2 to demonstrate how sequence-independent antibody identification can be achieved by simple means applied to the protein. First, we examined the intact and light chain masses of the antibodies relative to the reference material NIST-mAb 8671. Already half of the antibodies could be identified based solely on these two parameters. In addition, we developed two complementary peptide mass fingerprinting methods with MALDI-TOF-MS that can be performed in 60 min and had a combined sequence coverage of over 80%. One method is based on the partial acidic hydrolysis of the protein by 5 mM of sulfuric acid at 99 degrees C. Furthermore, we established a fast way for a tryptic digest without an alkylation step. We were able to show that the distinction of clones is possible simply by a brief visual comparison of the mass spectra. In this work, two clones originating from the same immunization gave the same fingerprints. Later, a hybridoma sequencing confirmed the sequence identity of these sister clones. In order to automate the spectral comparison for larger libraries of antibodies, we developed the online software ABID 2.0. This open-source software determines the number of matching peptides in the fingerprint spectra. We propose that publications and other documents critically relying on monoclonal antibodies with unknown amino acid sequences should include at least one antibody fingerprint. By fingerprinting an antibody in question, its identity can be confirmed by comparison with a library spectrum at any time and context.
Chemical modification by peroxynitrite enhances TLR4 activation of the grass pollen allergen Phl p 5
(2023)
The chemical modification of aeroallergens by reactive oxygen and nitrogen species (ROS/RNS) may contribute to the growing prevalence of respiratory allergies in industrialized countries. Post-translational modifications can alter the immunological properties of proteins, but the underlying mechanisms and effects are not well understood. In this study, we investigate the Toll-like receptor 4 (TLR4) activation of the major birch and grass pollen allergens Bet v 1 and Phl p 5, and how the physiological oxidant peroxynitrite (ONOO–) changes the TLR4 activation through protein nitration and the formation of protein dimers and higher oligomers. Of the two allergens, Bet v 1 exhibited no TLR4 activation, but we found TLR4 activation of Phl p 5, which increased after modification with ONOO– and may play a role in the sensitization against this grass pollen allergen. We attribute the TLR4 activation mainly to the two-domain structure of Phl p 5 which may promote TLR4 dimerization and activation. The enhanced TLR4 signaling of the modified allergen indicates that the ONOO–-induced modifications affect relevant protein-receptor interactions. This may lead to increased sensitization to the grass pollen allergen and thus contribute to the increasing prevalence of allergies in the Anthropocene, the present era of globally pervasive anthropogenic influence on the environment.
Rapid testing methods for the use directly at apointof need are expected to unfold their true potential especiallywhen offering adequate capabilities for the simultaneousmeasurement of multiple analytes of interest. Considering theunique modularity,high sensitivity,and selectivity of antibody-gated indicator delivery (gAID) systems,amultiplexed assayfor three small-molecule explosives (TATP, TNT,PETN) wasthus developed, allowing to detect the analytes simultaneouslywith asingle test strip at lower ppb concentrations in the liquidphase in < 5min using afluorescence reader or asmartphonefor readout. While the TNT and PETN systems were newlydeveloped here,all the three systems also tolerated harshermatrices than buffered aqueous model solutions.Besidesasingle-track strip,the outstanding modularity of the hybridbiosensor materials in combination with strip-patterningtechnologies allowed us to obtain amultichannel strip inastraightforwardmanner,offering comparable analyticalperformance while allowing to be tailored even more to theusersneed.
An improved antibody against the explosive pentaerythritol tetranitrate (PETN) was developed. The immunogen was designed by the concept of bioisosteric replacement, which led to an excellent polyclonal antibody with extreme selectivity and immunoassays of very good sensitivity. Compounds such as nitroglycerine, 2,4,6-trinitrotoluene, 1,3,5-trinitrobenzene, hexogen (RDX), 2,4,6-trinitroaniline, 1,3-dinitrobenzene, octogen (HMX), triacetone triperoxide (TATP), ammonium nitrate, 2,4,6-trinitrophenol and nitrobenzene were tested for potential cross-reactivity. The detection limit of a competitive enzyme-linked immunosorbent assay (ELISA) was determined to be around 0.5 µg/L. The dynamic range of the assay was found to be between 1 µg/L and 1000 µg/L, covering a concentration range of three decades. This work shows the successful application of the bioisosteric concept in immunochemistry by exchange of a nitroester to a carbonate diester. The antiserum might be used for the development of quick tests, biosensors, microtitration plate immunoassays, microarrays and other analytical methods for the highly sensitive detection of PETN, an explosive frequently used by terrorists, exploiting the extreme difficulty of its detection.
Environmental pollutants like fine particulate matter can cause adverse health effects through oxidative stress and inflammation. Reactive oxygen and nitrogen species (ROS/RNS) such as peroxynitrite can chemically modify proteins, but the effects of such modifications on the immune system and human health are not well understood. In the course of inflammatory processes, the Toll-like receptor 4 (TLR4) can sense damage-associated molecular patterns (DAMPs). Here, we investigate how the TLR4 response and pro-inflammatory potential of the proteinous DAMPs α-Synuclein (α-Syn), heat shock protein 60 (HSP60), and high-mobility-group box 1 protein (HMGB1), which are relevant in neurodegenerative and cardiovascular diseases, changes upon chemical modification with peroxynitrite.
For the peroxynitrite-modified proteins, we found a strongly enhanced activation of TLR4 and the pro-inflammatory transcription factor NF-κB in stable reporter cell lines as well as increased mRNA expression and secretion of the pro-inflammatory cytokines TNF-α, IL-1β, and IL-8 in human monocytes (THP-1). This enhanced activation of innate immunity via TLR4 is mediated by covalent chemical modifications of the studied DAMPs.
Our results show that proteinous DAMPs modified by peroxynitrite more potently amplify inflammation via TLR4 activation than the native DAMPs, and provide first evidence that such modifications can directly enhance innate immune responses via a defined receptor. These findings suggest that environmental pollutants and related ROS/RNS may play a role in promoting acute and chronic inflammatory disorders by structurally modifying the body's own DAMPs. This may have important consequences for chronic neurodegenerative, cardiovascular or gastrointestinal diseases that are prevalent in modern societies, and calls for action, to improve air quality and climate in the Anthropocene.
Comprehensive evaluation of peptide de novo sequencing tools for monoclonal antibody assembly
(2023)
Monoclonal antibodies are biotechnologically produced proteins with various applications in research, therapeutics and diagnostics. Their ability to recognize and bind to specific molecule structures makes them essential research tools and therapeutic agents. Sequence information of antibodies is helpful for understanding antibody–antigen interactions and ensuring their affinity and specificity. De novo protein sequencing based on mass spectrometry is a valuable method to obtain the amino acid sequence of peptides and proteins without a priori knowledge. In this study, we evaluated six recently developed de novo peptide sequencing algorithms (Novor, pNovo 3, DeepNovo, SMSNet, PointNovo and Casanovo), which were not specifically designed for antibody data. We validated their ability to identify and assemble antibody sequences on three multi-enzymatic data sets. The deep learning-based tools Casanovo and PointNovo showed an increased peptide recall across different enzymes and data sets compared with spectrum-graph-based approaches. We evaluated different error types of de novo peptide sequencing tools and their performance for different numbers of missing cleavage sites, noisy spectra and peptides of various lengths. We achieved a sequence coverage of 97.69–99.53% on the light chains of three different antibody data sets using the de Bruijn assembler ALPS and the predictions from Casanovo. However, low sequence coverage and accuracy on the heavy chains demonstrate that complete de novo protein sequencing remains a challenging issue in proteomics that requires improved de novo error correction, alternative digestion strategies and hybrid approaches such as homology search to achieve high accuracy on long protein sequences.
A new class of boron-dipyrromethene (BDP or BODIPY) dyes was obtained by phenanthrene fusion to the β-pyrrole positions, absorbing in the wavelength range of important laser sources. Despite a 'propeller-like' distorted structure in the crystalline state, the chromophore absorbs (log ε ≥ 5) and fluoresces (Φf ≥ 0.8) strongly and can be easily turned into a fluorescence light-up probe. Incorporation into latex beads produces bright and photostable single-dye and Förster Resonance Energy Transfer (FRET) particles for microscopy applications.
Mass spectrometry-based methods play a crucial role in the quantification of the main iron metabolism regulator hepcidin by singling out the bioactive 25-residue peptide from the other naturally occurring N-truncated isoforms (hepcidin-20, -22, -24), which seem to be inactive in iron homeostasis. However, several difficulties arise in the MS analysis of hepcidin due to the sticky character of the peptide and the lack of suitable standards. Here, we propose the use of amino- and fluoro-silanized autosampler vials to reduce hepcidin interaction to laboratory glassware surfaces after testing several types of vials for the preparation of stock solutions and serum samples for isotope dilution liquid chromatography-tandem mass spectrometry (ID-LC-MS/MS). Furthermore, we have investigated two sample preparation strategies and two chromatographic separation conditions with the aim of developing an LC-MS/MS method for the sensitive and reliable quantification of hepcidin-25 in serum samples. A chromatographic separation based on usual acidic mobile phases was compared with a novel approach involving the separation of hepcidin-25 with solvents at high pH containing 0.1% of ammonia. Both methods were applied to clinical samples in an intra-laboratory comparison of two LC-MS/MS methods using the same hepcidin-25 calibrators with good correlation of the results. Finally, we recommend an LC-MS/MS-based quantification method with a dynamic range of 0.5–40 μg/L for the assessment of hepcidin-25 in human serum that uses TFA-based mobile phases and silanized glass vials.
The trafficking of illegal drugs by criminal networks at borders, harbors, or airports is an increasing issue for public health as these routes ensure the main supply of illegal drugs. The prevention of drug smuggling, including the installation of scanners and other analytical devices to detect small traces of drugs within a reasonable time frame, remains a challenge. The presented immunosensor is based on a monolithic affinity column with a large excess of immobilized hapten, which traps fluorescently labeled antibodies as long as the analyte cocaine is absent. In the presence of the drug, some binding sites of the antibody will be blocked, which leads to an immediate breakthrough of the labeled protein, detectable by highly sensitive laser-induced fluorescence with the help of a Peltier-cooled complementary metal-oxide-semiconductor (CMOS) camera. Liquid handling is performed with high-precision syringe pumps and microfluidic chip-based mixing devices and flow cells. The biosensor achieved limits of detection of 7 ppt (23 pM) of cocaine with a response time of 90 s and a total assay time below 3 min. With surface wipe sampling, the biosensor was able to detect 300 pg of cocaine. This immunosensor belongs to the most sensitive and fastest detectors for cocaine and offers near-continuous analyte measurement.
Background:
Molecular-MRI is a promising imaging modality for the assessment of abdominal aortic aneurysms (AAAs). Interleukin-1β (IL-1β) represents a new therapeutic tool for AAA-treatment, since pro-inflammatory cytokines are key-mediators of inflammation. This study investigates the potential of molecular-MRI to evaluate therapeutic effects of an anti-IL-1β-therapy on AAA-formation in a mouse-model.
Methods:
Osmotic-minipumps were implanted in apolipoprotein-deficient-mice (N = 27). One group (Ang-II+01BSUR group, n = 9) was infused with angiotensin-II (Ang-II) for 4 weeks and received an anti-murine IL-1β-antibody (01BSUR) 3 times. One group (Ang-II-group, n = 9) was infused with Ang-II for 4 weeks but received no treatment. Control-group (n = 9) was infused with saline and received no treatment. MR-imaging was performed using an elastin-specific gadolinium-based-probe (0.2 mmol/kg).
Results:
Mice of the Ang-II+01BSUR-group showed a lower aortic-diameter compared to mice of the Ang-II-group and control mice (p < 0.05). Using the elastin-specific-probe, a significant decrease in elastin-destruction was observed in mice of the Ang-II+01BSUR-group. In vivo MR-measurements correlated well with histopathology (y = 0.34x-13.81, R2 = 0.84, p < 0.05), ICP-MS (y = 0.02x+2.39; R2 = 0.81, p < 0.05) and LA-ICP-MS. Immunofluorescence and western-blotting confirmed a reduced IL-1β-expression.
Conclusions:
Molecular-MRI enables the early visualization and quantification of the anti-inflammatory-effects of an IL-1β-inhibitor in a mouse-model of AAAs. Responders and non-responders could be identified early after the initiation of the therapy using molecular-MRI.