Filtern
Dokumenttyp
Sprache
- Englisch (2)
Referierte Publikation
- ja (2)
Schlagworte
Organisationseinheit der BAM
Linear and hyperbranched polyglycerol derivatives as excellent bioinert glass coating materials
(2011)
The non-specific adsorption of proteins to surfaces in contact with biofluids constitutes a major problem in the biomedical and biotechnological field, due to the initiation of biofilm formation and the resulting improper function of devices. Therefore, non-fouling surfaces modified with poly(ethylene glycol) (PEG) are usually applied. In this study, we report the synthesis of triethoxysilane modified glycerol based polymers of linear and branched architecture for the preparation of covalently attached monolayers on glass. Evaluation of the biocompatibility of these surfaces was performed in comparison to bare non-coated glass, hydrophobic hexadecane modified glass, and mPEG modified glass as the controls. Protein adsorption of BSA and fibrinogen (1 mg · mL-1 in PBS) after 4 and 24 h immersion was reduced by more than 96 and 90%, respectively, compared to the adsorption on bare glass substrates. In addition, mouse NIH-3T3 fibroblast cells showed only marginal adhesion on the polyglycerol and mPEG coated slides after 3 and 7 d incubation in cell suspension, which demonstrates the long-term stability of the applied glass coatings. The non-adhesive properties of these coatings were further reflected in bacterial adhesion tests of Escherichia coli K12 and three clinically relevant Gram-positive and negative strains (Staphylococcus aureus, Pseudomonas aeruginosa, and Aeromonas hydrophila), since linear polyglycerol (LPG(OH)), linear poly(methyl glycerol) (LPG(OMe)), and hyperbranched polyglycerol (HPG) reduced the adhesion for all tested strains by more than 99% compared to bare glass. Therefore, polyglycerol derivatives present an excellent non-fouling surface coating as an alternative to PEG with feasibility for surface modification of various substrates.
Thermoresponsive polymer coatings can facilitate cell sheet fabrication under mild conditions by promoting cell adhesion and proliferation at 37 1C. At lower temperatures the detachment of confluent cell sheets is triggered without enzymatic treatment. Thus, confluent cell sheets with intact extracellular matrix for regenerative medicine or tissue engineering applications become available. Herein, we applied the previously identified structural design parameters of functional, thermoresponsive poly(glycidyl ether) brushes on gold to the more application-relevant substrate glass via the self-assembly of a corresponding block copolymer (PGE-AA) with a short surface-reactive, amine-presenting anchor block. Both, physical and covalent immobilization on glass via either multivalent ionic interactions of the anchor block with bare glass or the coupling of the anchor block to a polydopamine (PDA) adhesion layer on glass resulted in stable coatings. Atomic force microscopy revealed a high degree of roughness of covalently attached coatings on the PDA adhesion layer, while physically attached coatings on bare glass were smooth and in the brush-like regime. Cell sheets of primary human dermal fibroblasts detached reliably (86%) and within 20 ± 10 min from physically tethered PGE-AA coatings on glass when prepared under cloud point grafting conditions. The presence of the laterally inhomogeneous PDA adhesion layer, however, hindered the spontaneous temperature-triggered cell detachment from covalently grafted PGE-AA, decreasing both detachment rate and reliability. Despite being only physically attached, self-assembled monolayer brushes of PGE-AA block copolymers on glass are functional and stable thermoresponsive coatings for application in cell sheet fabrication of human fibroblasts as determined by X-ray photoelectron spectroscopy.