Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (175)
- Vortrag (12)
- Beitrag zu einem Sammelband (9)
- Beitrag zu einem Tagungsband (8)
- Posterpräsentation (7)
- Buchkapitel (2)
Sprache
- Englisch (213) (entfernen)
Schlagworte
- MALDI-TOF MS (60)
- Polylactide (43)
- Cyclization (26)
- MALDI (20)
- Ring-opening polymerization (17)
- Polycondensation (15)
- MALDI TOF MS (9)
- Mass spectrometry (9)
- Pollen (8)
- Polymerization (8)
- Transesterification (8)
- Polymers (7)
- Ring-expansion polymerization (7)
- Catalyst (6)
- Crystallization (6)
- Ionization (6)
- Polymere (6)
- Catalysts (5)
- Crystalinity (5)
- Isosorbide (5)
- Lactide (5)
- Polyester (5)
- MALDI Massenspektrometrie (4)
- MALDI-TOF mass spectrometry (4)
- Polyesters (4)
- Polylactides (4)
- Biobased polymers (3)
- Bismuth (3)
- Cyclic (3)
- ICP-MS (3)
- Imaging (3)
- Liquid chromatography (3)
- Multivariate statistics (3)
- Polyglycolide (3)
- Polymer (3)
- Polymerisation (3)
- ROPPOC (3)
- Ring opening polymerization (3)
- SEC (3)
- Silver nanoparticles (3)
- Small-angle X-ray scattering (3)
- Adsorption (2)
- Amphiphiles (2)
- Biodegradable (2)
- Blends (2)
- Block copolymers (2)
- Catechol (2)
- Chromatographie (2)
- Chromatography (2)
- Conductive carbon tape (2)
- Coupling methods (2)
- Crosslinking (2)
- Crystals (2)
- Cyclopolymerization (2)
- Dispersity (2)
- ESI (2)
- Electrospray ionization (2)
- Epsilon-caprolactone (2)
- FTIR (2)
- Field-flow fractionation (2)
- Isotope dilution analysis (2)
- Kopplung (2)
- Liquid adsorption chromatography (2)
- MALDI mass spectrometry (2)
- MALDI-TOF-MS (2)
- MS/MS (2)
- Macrocycles (2)
- Massenspektrometrie (2)
- Matrix-assisted laser desorption/ionization (2)
- Plasma modification (2)
- Polystyrene (2)
- Polyurethane (2)
- Polyurethanes (2)
- Principal component analysis (2)
- Reversible addition fragmentation chain transfer (RAFT) (2)
- Ring-opening Polymerization (2)
- SAXS (2)
- Sample preparation (2)
- Sample pretreatment (2)
- Synthesis (2)
- Thermal degradation (2)
- Tin acetates (2)
- Tin catalysts (2)
- 2-oxazoline (1)
- A4F (1)
- AET (1)
- AFM (1)
- Adhesion promoting interlayers (1)
- Adhesion promotion (1)
- Alternating co-poly(ether pyridine)s (1)
- Amphiphilic polymers (1)
- Annealing (1)
- Application (1)
- Aromatic organic compounds, (1)
- Aromatic pollutants (1)
- Artificial weathering (1)
- Aryl iodides (1)
- Asymmetric flow filed-flow fractionation (1)
- Asymmetrical flow field flow fractionation (AF4) (1)
- Attenuated total reflectance-Fourier transorm infrared spectroscopy (1)
- Biobased (1)
- Biodegradability (1)
- Biodegradable polyesters (1)
- Biopolymers (1)
- Biosourced isosorbide (1)
- Blockcopolymer (1)
- CRM (1)
- Caco-2 cells (1)
- Caesium (1)
- Capillary electrophoresis (1)
- Capillary electrophoresis (CE) (1)
- Carbon capture (1)
- Carbon fiberepoxy resin laminates (1)
- Carboxyl group (1)
- Catalytic ability (1)
- Cationic ring opening polymerization (1)
- Cationization (1)
- Chain scission (1)
- Chemical conversion of functional groups (1)
- Chemical reduction of functional groups (1)
- Classification (1)
- Click chemistry (1)
- Climate change (1)
- Conjugated oligomers (1)
- Controlled radical polymerization (1)
- Conversion (1)
- Copolyester (1)
- Copolymer composition (1)
- Copolymer sequence (1)
- Copolymeranalytik (1)
- Copolymerization (1)
- Copolymers (1)
- Cotton effect (1)
- Coupling (1)
- Coupling techniques (1)
- Cyclics (1)
- Cyclisation (1)
- Cycloaddition (1)
- Cycloparaphenylenes (1)
- DCTB (1)
- Degradation (1)
- Dendrimers (1)
- Dendrons (1)
- Depollution (1)
- Desorption (1)
- Dried droplet (1)
- Droplet (1)
- Dynamic light scattering (1)
- ESI-Massenspektrometrie (1)
- ESI-TOF MS (1)
- Electron paramagnetic resonance study (1)
- Electrospray (1)
- Electrospray ionization (ESI) (1)
- Epsilon-Caprolactone (1)
- Epsilon-caprolactone (e-CL) (1)
- Equilibration (1)
- Europium (1)
- Field flow fractionation (1)
- Foldamers (1)
- Fractionation of polymers (1)
- Fragmentierung (1)
- Friction (1)
- Ft-IR (1)
- Functionalized graphene nanoribbons (1)
- Fundamentals (1)
- Glycodendrimers (1)
- Glycolide (1)
- Gradient chromatography (1)
- Gradient elution (1)
- Gradient elution liquid chromatography (GELC) (1)
- Graphene monomers (1)
- Graphene nanoribbons (1)
- Graphene wires (1)
- Green chemistry (1)
- HPLC (1)
- Hafnium (1)
- Heavy metals (1)
- Hexabenzocoronene (1)
- Hierarchical cluster analysis (1)
- Hierarchical self-assembly (1)
- High performance liquid chromatography (1)
- Host–guest systems (1)
- Humidity (1)
- Hybrid nanoparticles (1)
- Hydrolytic degradation (1)
- Hyperbranched polyesters (1)
- Hyphenated techniques (1)
- Imaging MS (1)
- Imaging techniques (1)
- In situ EXAFS (1)
- In situ SAXS/WAXS (1)
- In vitro digestion (1)
- Inductively coupled plasma-mass spectrometry (1)
- Inlet ionization (1)
- Intrinsic viscosity (1)
- Ion mobility (1)
- Ionization mass spectrometry (1)
- Iron oxide nanoparticles (1)
- Irreversible polycondensation (1)
- Isophthalic acid (1)
- Jacobsen-Stockmayer theory (1)
- Kopplungsmethoden (1)
- L-lactide (1)
- LC-MS coupling (1)
- Lactides (1)
- Lacunary Keggin ion (1)
- Lanthanide ions (1)
- Laser-induced redox reactions (1)
- Layer topography (1)
- Lead ions (1)
- Light scattering (LS) (1)
- Linear (1)
- Liquid adsorption chromatography at critical conditions (1)
- Liquid chromatography at critical conditions (1)
- Liquid chromatography under critical conditions (LCCC) (1)
- Lubricant (1)
- MALDI Imaging MS (1)
- MALDI TOF Massenspektrometrie (1)
- MALDI TOF mass spectrometry (1)
- MALDI-TOF (1)
- MALDI-TOF MS/MS (1)
- MALDI-TOF Mass Spectrometry (1)
- MALDI-ToF MS (1)
- MOF (1)
- Mass Spectrometry (1)
- Mass spectrometry imaging (1)
- Materials Chemistry (1)
- Matrices (1)
- Matrix segregation (1)
- Matrix-assisted ionization ion mobility spectrometry mass spectrometry (1)
- Matrix-assisted laser desorption (1)
- Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS) (1)
- Matrix-assisted laser desorption/ionization-time-of-flight-mass spectrometry (1)
- Mechanism (1)
- Mechanism of polymerization (1)
- Mega-dalton (1)
- Metal ion complexation (1)
- Metal ion-intradendrimer complexes (1)
- Metal triflates (1)
- Metal-polymer interactions (1)
- Metal-polymer systems (1)
- Micro manufacturing (1)
- Microwave (1)
- Moisture (1)
- Molar mass determination (1)
- Molar mass distribution (1)
- Molecular masses (1)
- Molecular recognition (1)
- Morphology (1)
- Multicyclic polymers (1)
- Multiphysics simulations (1)
- Multivariate Statistics (1)
- Multivariate analyses (1)
- N-vinyl pyrrolidone (1)
- Nanolithography (1)
- Nanoparticle (1)
- Nanoparticles (1)
- Nanoparticles separation asymetrical flow field flow fractionation (1)
- Nanoparticles with same nominal diameter (1)
- Networks (1)
- Oligoazobenzene (1)
- Oligospiroketals (1)
- On-surface polymerization (1)
- Organic Chemistry (1)
- Oxygen low-pressure plasma treatment of polymers (1)
- PCA (1)
- PET (1)
- Partial least square discriminant analysis (PLS-DA) (1)
- Peel strength (1)
- Pentafluoropyridine (1)
- Phenolic acid (1)
- Phenolic compounds (1)
- Phenyleneethynylenes (1)
- Phosphonate esters (1)
- Photoligation (1)
- Photooxidation (1)
- Photoswitchable (1)
- Plasma (1)
- Plasma polymers with functional groups (1)
- Pollen grains (1)
- Poly(ether-phosphoramide)s sulfides (1)
- Poly(ethylene glycol) (1)
- Poly(ethylene terephthalate) (1)
- Poly(lactide) (1)
- Polyaddition (1)
- Polycaprolactone (1)
- Polycarbonate-co-dimethylsiloxane copolymer (1)
- Polycondensations (1)
- Polyelectrolytes (1)
- Polyethylene (1)
- Polyethylene oxide (1)
- Polyforamidine (1)
- Polykondensation (1)
- Polymer MALDI (1)
- Polymer blends (1)
- Polymer chromatography (1)
- Polymer film (1)
- Polymer mass spectrometry (1)
- Polymer reference materials (1)
- Polymerization mechanisms (1)
- Polymers and Plastics (1)
- Polyoxometalates (1)
- Polypropylene (1)
- Polysarcosine (1)
- Principal component analysis (PCA) (1)
- Quantification (1)
- ROMP (1)
- Raman (1)
- Renewable resources (1)
- Reversible addition/fragmentation chain transfer (RAFT) (1)
- Ring opening polymerization (ROP) (1)
- Ring-opening Polymerisation (1)
- Ring-opening polymerizations (1)
- Salicylate (1)
- Sample loss (1)
- Self-assembly (1)
- Semi-interpenetrating networks (1)
- Silica gel modification (1)
- Size exclusion chromatography (1)
- Size exclusion chromatography (SEC) (1)
- Size-exclusion chromatography (1)
- Sn catalysts (1)
- Soft ionization mass spectrometry (ESI, MALDI) (1)
- Software (1)
- Solvent-free (1)
- Sonoga (1)
- Sorption isotherm (1)
- Sorption mechanism (1)
- Spacers (1)
- Speciation (1)
- Spirocyclic (1)
- Stereocomplex (1)
- Succinic acid (1)
- Sulfobetaines (1)
- Supramolecular chemistry (1)
- Surface analysis (1)
- Surface coating (1)
- TPU (1)
- Tandem MS (1)
- Target plate material (1)
- Telechelic polyesters (1)
- Thermo-desorption (1)
- Thermochemistry (1)
- Thin polymer layers (1)
- Time of flight (1)
- Tin(II)octanoate (1)
- Toxicity (1)
- Toxicology (1)
- Triazenes (1)
- Two-dimensional off-line coupling (1)
- Two-dimensional-liquid chromatography (2D-LC) (1)
- UPLC (1)
- UV degradation (1)
- UV radiation (1)
- Ultraschallfalle (1)
- Universal calibration (1)
- Vacuum ionization (1)
- WMRIF (1)
- Water-soluble polymers (1)
- X-ray photoelectron spectroscopy (1)
- Zinc catalyst (1)
- a2 + b3 polycondensation (1)
- cyclization (1)
- dispersity (1)
- mass spectra (1)
- mass spectrometry (1)
- polycondensation (1)
- polyesters (1)
- polyionic liquids (1)
- r.f. pulsed plasma (1)
- reversible addition fragmentation chain transfer (RAFT) polymerization (1)
- ring-expansion polymerization (1)
- surface modification (1)
Organisationseinheit der BAM
- 6 Materialchemie (81)
- 6.3 Strukturanalytik (81)
- 1 Analytische Chemie; Referenzmaterialien (5)
- 1.2 Biophotonik (2)
- 1.7 Organische Spuren- und Lebensmittelanalytik (2)
- 6.6 Physik und chemische Analytik der Polymere (2)
- 7 Bauwerkssicherheit (2)
- 7.5 Technische Eigenschaften von Polymerwerkstoffen (2)
- 1.0 Abteilungsleitung und andere (1)
- 1.3 Instrumentelle Analytik (1)
Eingeladener Vortrag
- nein (12)
Thermo-Desorption Gas Chromatography-Mass Spectrometry (TD-GC-MS) was used to investigate the thermal degradation of two different polyurethanes (PU). PU samples were heated at different heating rates and the desorbed products were collected in a cold injection system and thereafter submitted to GC-MS. Prospects and limitations of the detection and quantification of semi-volatile degradation products were investigated. A temperature dependent PU depolymerization was
found at temperatures above 200 °C proved by an increasing release of 1,4-butanediol and methylene diphenyl diisocyanate (MDI) representing the main building blocks of both polymers. Their release was monitored quantitatively based on external calibration with authentic compounds. Size Exclusion Chromatography (SEC) of the residues obtained after thermodesorption confirmed the initial competitive degradation mechanism indicating an equilibrium of crosslinking and depolymerization as previously suggested. Matrix-Assisted Laser Desorption Ionization (MALDI) mass spectrometry of SEC fractions of thermally degraded PUs provided additional hints on degradation mechanism.
1-Hydroxymethylnaphtalene (HMN) or 11-bromoundecanol (BUND) were used as initiators and Sn(II) 2-ethylhexanoate (SnOct2) as catalyst for ROPs of L-Lactide (LA) at 115 °C in bulk or in 4 M and 2M solutions in toluene. The LA/In ratio, the LA/Cat ratio and the time were varied. The matrix-assisted laser desorption/ionization time-of-flight (MALDI TOF) mass spectra exclusively displayed peaks of linear chains, when the ROPs were conducted in bulk. But in contrast to reports in the literature, mixtures of linear and cyclic poly(L-lactide) (PLA), were obtained, when the ROPs were performed in solution. The intensity distribution of the mass peaks of cyclic PLAs displayed a “saw-tooth pattern” after annealing in contrast to the mass peak distribution of the liner chains. This new phenomenon indicated that cyclic PLAs and linear PLAs crystallized in separate crystals from the same reaction mixture. This conclusion was confirmed by fractionated crystallization from 2 M solution, which confirmed that the cyclic PLAs nucleate and crystallize faster than the linear chains.
Alcohol-initiated ROPs of L-Lactide were performed at 140 ◦C in bulk with variation of the initiator/catalyst ratio and time. Lower ratios favor the formation of cycles which upon annealing display a change of the MALDI mass peak distribution towards a new maximum with a “saw-tooth pattern” of the mass peaks representing the cycles.
Such a pattern was not observed for the mass peak of the linear chains. The coexistence of these patterns indicate that linear and cyclic poly (L-lactide)s (PLA) crystallize in separate crystals, and that the crystallites of the cycles are made up by extended rings. High Tm and ΔHm values confirm that these extended-ring crystallites represent a thermodynamically optimized form of PLA. Experiments with preformed cyclic and linear PLAs support this interpretation.
Cyclic and linear poly(L-lactide)s by ring-expansion polymerization with Bu2SnO, Oct2SnO, and Bu2SnS
(2023)
To elucidate the usefulness of commercial Bu2SnO as catalyst for syntheses of linear and/or cyclic polylactides L-Lactide was polymerized in bulk with variation of the LA/Cat ratio, temperature and time. Based on a ring-expansion polymerization (REP) mechanism cyclic polylactides (PLAs) with weight average molecular weights in the range of 200,000–300,000 are obtained at the highest temperature (180 °C). Polymerizations at 150 °C yielded crystalline, mainly cyclic polylactides which, after annealing, showed high melting temperatures (up to 197.5 °C) and high crystallinities (>80%). Polymerization at 120 °C confirmed the trend towards more linear chains with lower temperatures but yielded extended-ring crystals showing a “saw-tooth pattern” in the mass spectra. Oct2SnO gave similar results as Bu2SnO. Bu2SnS proved a sluggish polymerization catalyst, but a good transesterification catalyst in solid PLA.
This article describes the elaboration and characterization of diethylphosphonate-containing polymers coated electrodes as sensors for the detection of heavy metalstraces, by electrochemical impedance spectroscopy. Diethylphosphonate groupswere chosen as heavy metals binding sites. Two different series of polymers bearingthese anchoring groups were synthesized. Whereas the diethylphosphonate groupsare directly incorporated in the aromatic macromolecular chain in some polymers, analiphatic spacer is removing the chelating site from the polymer backbone in others.The influence of the macromolecular structure on the sensing response was studied,especially for the detection of Pb2+,Ni2+,Cd2+and Hg2+. Polymer P6, including thehigher amount of diethylphosphonate groups removed from the polymer chain by ashort alkyl spacer gave the higher sensitivity of detection of lead ions, with a detec-tion limit of 50 pM
L-lactide (LA) was polymerized in toluene by means of neat tin(II) 2-ethylhexanoate (SnOct2). Concentration, time and temperature were varied. The isothermally crystallized polyLAs (PLA) were characterized in the virgin state with regard to topology, molar mass, melting temperature (Tm), crystal modification, high or low Tm morphology, crystallinity and crystal thickness. Even a small amount of solvent favored cyclization relative to polymerization in bulk, so that cyclic polylactides were obtained at 115 ◦C and even at 95 ◦C. At all temperatures the α-modification of PLA was obtained along with crystallinities up to 90%. With 6 M solution the high Tm morphology with Tm’s > 190 ◦C was obtained at 115 ◦C. The crystal thickness of crystallites grown from solution at 115 ◦C was on the average 10–20% higher than that of PLA polymerized in bulk. At a polymerization temperature of 75 ◦C cyclization was incomplete and fewer perfect crystallites were formed. A new hypothesis for the crystal growth of cyclic polyLAs is proposed.
For the development of selective and sensitive chemical sensors, we have developed a new family of poly(etherphosphoramide) polymers. These polymers were obtained with satisfactory yields by nucleophilic aromatic polycondensation using isosorbide as green resources, and bisphenol A with two novel difluoro phosphinothioic amide monomers. Unprecedented, the thiophosphorylated aminoheterocycles monomers, functionalized with two heterocyclic amine, N-methylpiperazine and morpholine were successfully obtained by nucleophilic substitution reaction of P(S)–Cl compound. The resulting polymers were characterized by different analytical techniques (NMR, MALDI–ToF MS, GPC, DSC, and ATG). The resulting partially green polymers, having tertiary phosphine sulfide with P–N side chain functionalities along the main chain of polymers are the sensitive film at the surface of a gold electrode for the impedimetric detection of Cd, Ni, Pb and Hg. The bio-based poly(etherphosphoramide) functionalized with N-methylpiperazine modified sensor showed better analytical performance
than petrochemical based polymers for the detection of Ni2+. A detection limit of 50 pM was obtained which is very low compared to the previously published electrochemical sensors for nickel detection.
MALDI-ToF mass spectrometry for the characterization of biobased polymers suitable for depollution
(2022)
In this work, bio-based polymers were synthesized and designed as polymers phases for adsorption of a variety of pollutants from aqueous solutions. The obtained adsorption results showed that the integration of bio-sourced synthons generate attractive hydrophilicity, and wettability of the resulting adsorbent phase. Such polymers phases enable stronger interactions with the organic and inorganic pollutants in water.
A wide variety of different bio-based polymers structures (e. g. poly(ethersulfones, poly(etherphosphines or poly(etherpyridines) with different functional groups were successfully designed in order to adapt chemical structure to different pollutants type and matrice nature.
In order to characterize and to determine the correlation between polymer structures and nature of interaction with pollutants, different analytical technics (NMR, GPC, ATG, DSC, Mass spectrometry) were successfully used. Amongst them, MALDI TOF mass spectrometry plays a superior role since this technique enables the simultaneous determination of the polymer structure, polymer end groups and molecular weight.
This work focusses on the characterization of synthesized polymers. The chemical structure of the repeating unit, the nature of the end groups, as well as the molecular weight, which are all important for the specific interactions of the polymer with the pollutants were clearly determined and suggestions to improve these interactions by changing the synthetic pathway could be given.
L-Lactide was polymerized in bulk at 140 °C with three different cyclic tin catalysts and the time was varied from 1 d up to 14 d. The MALDI TOF spectra confirmed the formation of cyclic polylactides (PLAs) and displayed a characteristic change of peak intensity distribution with formation of a “saw tooth pattern”. This pattern confirms a previous hypothesis that cyclic PLAs tend to form crystallites with extended ring conformation and relatively smooth surface. This type of crystallites is formed under thermodynamic control by transesterification on the surface of the crystallites. In this way PLAs with extraordinarily high melting temperatures (Tm's up to 200.6 °C) and extraordinarily high melting enthalpy were obtained (ΔHm's up to 105 J g−1). These ΔHm values require a revision of the maximum ΔHm value calculated in the literature for ideal PLA crystals.
Ring-expansion polymerizations (REPs) catalyzed by two cyclic tin catalysts(2-stanna-1.3-dioxa-4,5,6,7-dibenzazepine [SnBiph] and
2,2-dibutyl-2-stanna-1,3-dithiolane [DSTL) are performed at 140 °C in bulk.
Small amounts (4 vol%) of chlorobenzene or other solvents are added to facilitate transesterification reactions (ring–ring equilibration) in the solid poly(l-lactide)s. In the mass range up to m/z 13 000 crystalline PLAs displaying a so-called saw-tooth pattern in the MALDI-TOF mass spectra are obtained indicating the formation of extended-ring crystals. The characteristics of extended-ring crystallites and folded-ring crystallites are discussed. Furthermore, extremely high melting temperatures (Tm’s up to 201.2 °C) and melting enthalpies (𝚫Hm’s up to 106 J g−1)) are found confirming that 𝚫Hmmax, the 𝚫Hm of a perfect crystal, is around or above 115 J g−1 in contrast to literature data.