Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (64) (entfernen)
Sprache
- Englisch (40)
- Deutsch (23)
- Mehrsprachig (1)
Schlagworte
- Organic peroxides (7)
- Explosive properties (6)
- CFD simulation (5)
- DSC (4)
- Peroxy-fuels (4)
- Pool fire (4)
- SADT (4)
- Safety distances (4)
- Azides (3)
- Fireball (3)
Organisationseinheit der BAM
One of the fundamental principles of the UN-GHS (Globally Harmonized System of Classification and Labelling of Chemicals) is that all hazards of a chemical should be assigned and communicated. There is no general prioritization of hazards in the sense that certain hazard classes are not applicable if another one has been assigned. In contrast to health and environmental hazards, there are physical or chemical factors which preclude certain combinations of physical hazard classes. So far, there is no common understanding as to which combinations are relevant and which not. For example, should a pyrophoric liquid be classified as flammable liquid in addition, or is this redundant and unnecessary? In the course of the implementation of the GHS by countries or sectors and the actual application by industry all over the world, such questions become more and more important.
This publication systematically discusses all combinations of the UN-GHS physical hazard classes and assesses them with regard to the relevance of possible simultaneous assignment to a chemical. For many of the combinations an unambiguous decision based on theGHS alone is not possible, thus confirming that the question which physical hazard classes might be assigned simultaneously to a chemical is not trivial. As one more milestone on the path to a globally harmonized system for the classification of hazardous chemicals, this should be discussed and ultimately solved on a global basis. It is the hope that this publication might serve as an impetus for such discussions.
Safe transport of cyanamide
(2009)
For many years cyanamide (CAS no. 420-04-2) was not commercially available due to its unstable nature. Since about 1965 the former "Süddeutsche Kalkstickstoffwerke AG" (current name: AlzChem Trostberg GmbH) developed a special stabilizing system. It was to be investigated to which Class (e.g. "Corrosive Substances", Class 8) or Division (e.g. "Self-reactive Substances", Division 4.1) of the International Regulations for the Transport of Dangerous Goods cyanamide (pure or as a 50% solution in water) should be assigned and based on this which maximum quantities are allowed to transport e.g. in tanks. Cyanamide is used for the synthesis of pharmaceutical and agrochemical actives, biocides, dyestuffs and fine chemicals.
During the last years cyanamide was tested at BAM and AQura. The results and an appraisal are presented in this paper. Thus, cyanamide should be classified according to the UN Recommendations on the Transport of Dangerous Goods in Class 8, UN number 2922 (50% solution in water) and UN number 2923 (pure substance) respectively, packaging group III, danger labels 8 + 6.1. Cyanamide, 50% solution in water, can be transported in portable tanks under specific conditions.
Tests according to the UN Recommendations on the Transport of Dangerous Goods for the determination of explosive properties of organic peroxides have been compared with screening criteria for explosivity based on measurements in a closed mini-autoclave (MCPVT). It will be shown that an additional screening test may be helpful but the information obtained from the UN tests are more important to characterise the specific properties of a substance under different conditions.