Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (48) (entfernen)
Sprache
- Englisch (43)
- Deutsch (4)
- Mehrsprachig (1)
Schlagworte
- Weathering (15)
- Chemiluminescence (7)
- Degradation (5)
- Artificial weathering (4)
- Flame retardant (4)
- Nanocomposite (4)
- UV radiation (4)
- Durability (3)
- Polymer (3)
- Ageing (2)
- Artificial turf (2)
- Coatings (2)
- Cone calorimeter (2)
- Crosslinking (2)
- DOPO (2)
- Epoxy resin (2)
- Intumescence (2)
- Irradiation (2)
- Leaching (2)
- Multilayer graphene (2)
- Nitric acid (2)
- Oxidation (2)
- Packaging (2)
- Polyethylene (2)
- Polyurethane (2)
- Rubber (2)
- UV (2)
- 3-dimensional microscopy (1)
- ADF (1)
- Accelerated aging (1)
- Accelerated weathering (1)
- Acid Dew and Fog test (1)
- Acid rain (1)
- Active thermography (1)
- Additive manufacturing (1)
- Additives (1)
- Aging (1)
- Alterung (1)
- Aluminum hydroxide (ATH) (1)
- Artificial Weathering test (1)
- Athletic tracks (1)
- Automotive coatings (1)
- Back-sheet foil (1)
- Bacterial attachment (1)
- Batch test (1)
- Bestrahlen (1)
- Bewitterern (1)
- Cable (1)
- Cables (1)
- Carbon nanotubes (1)
- Chemiluminescence (CL) (1)
- Chemilumineszenz (1)
- Coating (1)
- Colour center (1)
- Column percolation tests (1)
- Column test (1)
- Contamination (1)
- Dielectric relaxation (1)
- Dispersion (1)
- Eigenschaftsänderung (1)
- Elastomer (1)
- Encapsulation foil (1)
- Ethylene-vinyl acetate (1)
- FTIR (1)
- Fire protective coatings (1)
- Fire resistance (1)
- Fire retardancy (1)
- Fluorescence (1)
- Friction (1)
- Fuel sorption (1)
- Geotextiles (1)
- Graphene (1)
- HDPE (1)
- Heavy metals (1)
- High density polyethylene (1)
- High-density polyethylene (1)
- Humidity (1)
- LDPE (1)
- Liquid-cristalline conjugated Polymer (1)
- Magnesium hydroxide (1)
- Mechanical properties (1)
- Micro-CT scanning (1)
- Microplastic (1)
- Middle Pleistocene (1)
- Mildew (1)
- Moisture (1)
- Molecular mass distribution (1)
- Molecular masses (1)
- Nanocomposites (1)
- Numerical simulation (1)
- Optical transmission stability (1)
- Outdoor weathering (1)
- Photo-oxidation (1)
- Photooxidation (1)
- Photostability (1)
- Polarized fluorescence measurements (1)
- Polymer degradation (1)
- Polymer optical fiber (1)
- Polymer optical fibers (POFs) (1)
- Polymers (1)
- Polymerwerkstoff (1)
- Polyolefins (1)
- Quantification (1)
- Referenzmaterial (1)
- Release (1)
- Resistance (1)
- Rubber granules (1)
- SBR (1)
- Sensitive detection (1)
- Siloxane (1)
- Silver nanoparticles (1)
- Size exclusion chromatography (1)
- Snail trails (1)
- South Florida (1)
- Spectral irradiation (1)
- Spectral sensitivity (1)
- Stone Age (1)
- Sulfur containing polymers (1)
- Synergy (1)
- Synthesis (1)
- TG-FTIR (1)
- TPU (1)
- Temperature (1)
- Temperature dependency (1)
- Thermal degradation (1)
- Thermo-oxidation (1)
- Thermo-oxidative stability (1)
- Thermogravimetric analyses (1)
- Thermoluminescence (1)
- Thermoset (1)
- Throwing-stick (1)
- Transparency (1)
- Triazine (1)
- UHMWPE (1)
- UV degradation (1)
- UV-irradiation (1)
- UV/VIS spectroscopy (1)
- Waste rubber (1)
- Weathering resistance (1)
- Wood (1)
- Yellowness index (1)
- behaviour (1)
- biodiesel (1)
- biofuels (1)
- carbon black (1)
- degradation (1)
- multilayer graphene (1)
- nanocomposites (1)
- plasticization (1)
- polyethylene (1)
- rubber (1)
- sorption (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (13)
- 7.5 Technische Eigenschaften von Polymerwerkstoffen (13)
- 6 Materialchemie (5)
- 6.3 Strukturanalytik (4)
- 3 Gefahrgutumschließungen; Energiespeicher (3)
- 3.1 Sicherheit von Gefahrgutverpackungen und Batterien (3)
- 5 Werkstofftechnik (3)
- 4 Material und Umwelt (2)
- 5.3 Polymere Verbundwerkstoffe (2)
- 6.6 Physik und chemische Analytik der Polymere (2)
Artificial weathering of LDPE under dry conditions (<10% of relative humidity) by UV radiation was monitored
by dielectric spectroscopy. For an apolar polymer like LDPE, dielectric study yields information
about the change in structure and dynamics of the system. The fluctuations of the polar groups which
are generated as a result of photooxidation such as carbonyl groups can be monitored as characteristic
relaxation processes like the αc or β mode. The dielectric loss characterized by typical dielectric parameters
like the activation energy and dielectric strength are strongly dependent upon changes induced
by photooxidation in the amorphous and crystalline domains. This paper discusses in detail how the foil
reached its mechanical disintegration. It was found that initial stages of weathering induce chain scission
and/or crosslinking in the amorphous domains of the polymer and the motional processes in the crystalline
regions are not affected. After this induction period, an increase in the degree of crystallization was
observed by employing differential calorimetry. The increasing crystallinity is considered as one of the
reasons for embrittlement which finally leads to the complete loss of the structural integrity.
Chemiluminescence (CL) is a sensitive method of investigating the thermo-oxidative stability of polymers in the early stages of degradation. Therefore, CL measurements were applied to different automotive coatings to evaluate their degradation behavior during artificial weathering. In this work, CL measurements were carried out for different automotive coatings to follow their degradation behavior during artificial weathering. The CL emission depends on sample-specific parameters like stabilizer, matrix, or hardener; experimental parameters like the oxygen partial pressure; and exposure parameters like the duration of weathering. The potential of CL could be demonstrated by classifying materials into categories of good, medium, and low degradation performance at a much earlier stage of weathering exposure than in combination with the usual visual detection of weathering effects.
Accelerated weathering test for plastics and coatings that are exposed to acidic precipitation
(2009)
Due to the occurrence of acidic precipitation, and due to the fact that polymers and stabilizers may be sensititve to acids, it is important to have a laboratory test that combines weathering exposure with acidic exposure. The loss of stabilization caused by an acid damage of stabilizing system gets evident only over the weathering progress. For solid samples, for wich mostly the surface properties are relevant, the "Acid Dew and Fog Test" (ADF test) was established. For woven or tufted materials, the "Acid Rain Test" (AR test) was developed. The proposed weathering tests aim at plastics as well as at coatings.
The thermo-oxidative stability of commercially available polymer optical fibers (POFs) and their components (cores and claddings) was investigated. All the bare POFs (core and cladding only) studied here were based on poly(methyl methacrylate) (PMMA) core. The fibers were exposed to 100 °C/low humidity for about 4200 h. Chemiluminescence (CL) technique was applied to investigate the thermo-oxidative stability and for measuring the transmission loss during exposure a prototype device called multiplexer was used. POFs exhibited variation in thermo-oxidative stability although they possessed identical core material PMMA. This was due to difference in the chemical compositions of claddings. Claddings were more susceptible to the thermo-oxidative degradation compared to cores. The thermo-oxidative degradation of both the cladding and the core was found in POFs as a result of climatic exposure. POFs showed an early drop-off followed by a slow decline of transmission. The early drop-off of transmission was attributed to physical changes like thermal expansion and the slow decline of transmission to chemical changes like oxidative degradation of POFs. A good linear relationship between optical transmission stability and thermo-oxidative stability of POFs was established from these studies.
Bei der Auswahl von Werkstoffen spielt deren Alterung oft eine untergeordnete Rolle, stattdessen wird häufig der ungealterte Ausgangszustand optimiert. Materialien altern aber unterschiedlich. Der Effekt der molekularen Alterung spiegelt sich in den Eigenschaften mehr oder weniger stark und in unterschiedlichem zeitlichen Verlauf wider. Da es kein physikalisch-chemisches Modell dafür gibt, sind Alterungseffekte empirisch zu bestimmen.
Combined impact of ultraviolet and chemical fluids on high-density polyethylene packaging material
(2012)
To investigate the ageing behaviour of filled plastic containers outdoors, square cuts of the wall of two high-density polyethylene (HDPE) types were exposed to ultraviolet (UV) radiation at their front side and to specific liquid chemicals (de-ionized water, surfactant or White Spirit) at their back. The UV radiant exposure at the front side was 80 MJ/m².
To compare the actions of the different exposures, separate dark backside fluid exposures were performed, in parallel. Besides, UV weathering was carried out until a UV radiant exposure of 325 MJ/m², being roughly comparable to outdoor exposure of one year in Northern Australia.
An unpigmented HDPE included in the investigation gave no sufficient protection for the White Spirit. In addition, it showed clear degradation after several of these exposures. In combination with the White Spirit, an increase of carbonyl bonds was measured, presumably assignable to degradation products of the White Spirit.
For a pigmented HDPE material, with the implemented combined exposures, no relevant damage was observed, within applied the exposure period.