Filtern
Dokumenttyp
Referierte Publikation
- nein (21) (entfernen)
Schlagworte
- Radar (16)
- Masonry (6)
- Non-destructive testing (5)
- Active thermography (4)
- Ultraschall (4)
- Ultrasonic (4)
- ZfPBau (4)
- Beton (3)
- Bewehrung (3)
- Concrete (3)
For the investigation of the complex inner structure of historic buildings, the application of radar has been increased during the last ten years. Although historic masonry in general is very inhomogeneous and although in some cases high absorption occurs due to enhanced moisture, radar has been successfully applied to get information on geometry, position of inclusions and about kind and size of existing damages. In this paper case studies will be presented concerning the localisation of metallic inclusions and the investigations of the structure of an exterior wall with a multiple leaf structure.
Ortung von Hohlstellen und Ablösungen in Betonkonstruktionen mit Radar und Impuls-Thermografie
(2003)
Non-destructive testing (NDT) of concrete structures is performed using pulse-echo methods. According to the type of the applied waves it can be classified as acoustic (Impact-Echo, Ultrasonics) and electromagnetic methods (Radar). The results are visualised through different imaging processes. This work is performed in the frame of a research project promoted by Deutsche Forschungsgemeinschaft (FOR384).The objective of data fusion is to use the complementary information of the different methods. Radar can detect metallic reflectors in concrete (metallic ducts and concrete reinforcement) very well. This method is not able to locate defects behind these reflectors (injecting defects, defects behind close concrete reinforcement), because the electromagnetic waves are completely reflected at metals. The acoustic methods are able to compensate this deficit i.e. acoustic waves can penetrate through metal. But acoustic waves in the ultrasonic range are completely reflected by air layers. Air layers have smaller influence on radar propagation, so that both methods complement each other.In order to be able to combine the NDT-data from several methods records at the same volume, the different data setsmodes of signals must be adapted. The ultrasonic and radar data have to be reconstructed with programs based on the Synthetic Aperture Focusing Technique (SAFT) before data fusion. Subsequently, a conversion of the data into a uniform format has to be carried out. This is a prerequisite in order to keep the data exchange between the project partners as simple as possible. After the data sets are imported and transferred into a common reference system, they can be processed with operations according to the purpose of the investigation. Results, which have been achieved in concrete test specimen with radar and ultrasonics, will be presented and will show the feasibility of the data fusion method.
Im Rahmen eines FE-Projektes “Inspektion Fester Fahrbahnen“ der BAM und der Deutschen Bahn AG geht es um die Anwendung und weitere Entwicklung zerstörungsfreier Messverfahren zur Beurteilung des Zustandes Fester Fahrbahnen.
Nach ersten Versuchsreihen direkt im Gleis wurden für verschiedene Bauarten die charakteristischen Herstellungsbedingungen simuliert und systematisch untersucht. Die kombinierte Anwendung der drei Messverfahren Ultraschall-Array-, Impakt-Echo- und Impuls-Radar-Verfahren wird hier an dem Beispiel “Betonschwelle in Betoneinbettung” dargestellt.
Radar und Datenfusion
(2007)
Influence of concret properties on the calibration of radar, ultrasonics and active thermography
(2008)
Non-destructive and minor destructive testing methods enable a classification of historic structures, building processes, applied building technologies and materials. Therefore, these methods should be part of the global investigation of historic buildings which is usually required before the planning of any building intervention. The case study presented herein encompasses experimental work carried out at the St. Servatius Church in Quedlinburg, Germany. Within a comprehensive restoration campaign, non-destructive on-site investigations were carried out with radar and ultrasonics. The results were combined with plans, views and cores recorded in advance.
In den letzten Jahren hat sich das Impulsradar als zerstörungsfreies Prüfverfahren im Bauwesen insbesondere zur Ortung von metallischen Einbauteilen wie z. B. schlaffer und vorgespannter Bewehrung in Betonbauteilen immer stärker durchgesetzt.
Systematische Laboruntersuchungen und Fallstudien zeigen aber auch, dass das Verfahren sehr gut zur Ortung von Hohlstellen sowohl in Mauerwerk als auch in Betonstrukturen geeignet ist.
Das Radarverfahren arbeitet nach dem Impuls-Echo Prinzip. Dabei wird von der Sendeantenne ein sehr kurzer elektromagnetischer Impuls ausgesendet (ca. 3 Halbwellen), der an Grenzflächen im Material (Änderung der Dielektrizitätskonstanten) und bei nicht zu dicken Bauteilen auch an der Rückseite reflektiert und von der Empfangsantenne detektiert wird. Bei den hier vorgestellten Messergebnissen wurden eine 900 MHz sowie eine 1,5 GHz Antenne in Kombination mit einem kommerziellen Radargerät eingesetzt.