Filtern
Dokumenttyp
- Vortrag (3) (entfernen)
Sprache
- Englisch (3)
Referierte Publikation
- nein (3)
Schlagworte
- RFID based sensors (3) (entfernen)
Eingeladener Vortrag
- nein (3)
To quantify the moisture in concrete, RFID based humidity sensors are embedded. Passive high frequency, ultra-high frequency RFID tags as well as active Bluetooth sensors are tested. After concreting, all sensors measure the corresponding relative humidity to monitor the concrete moisture. Two case studies are performed, embedding in an existing construction, i.e. the duraBASt test bridge, and embedding in cement based mortar in the laboratory. As basis for robust and long-life sensors in alkaline concrete, different casing materials are tested. Furthermore, signal strength measurements and their sensitivity to different moisture levels are performed.
The duraBASt area at the highway intersection “Köln-Ost” is a large test field for road testing. It includes the duraBASt test bridge which is ca. 66 m long and 14.25m broad. This bridge is part of the “road in the 21st century” project and is equipped with several sensors for structural health monitoring. This feasibility study is realised to construct intelligent bridges in the future. Quantities like temperature, strain, moisture, corrosion, etc. are measured by embedded sensors. In the presented work, the focus lays on passive RFID-based sensors. The communication and energy supply is realised by a mobile transmitter through the concrete cover. Hence, no cables or batteries are required. The sensors are design to withstand in the alkaline environment in concrete. Thus, moisture and corrosion are detectable for several decades.
Damages in infrastructure due to moisture amount to billions of Euros every year. For a more predictive structural health monitoring in civil engineering, the detection and monitoring of hazardous moisture in steel reinforced concrete constructions is of high interest. The sensors have to be wireless, elsewise they weaken the concrete cover of the rebars. The lifetime of such constructions is normally decades, thus the sensors have to be battery-free and fully passive. Considering these requirements, passive RFID-based sensors are developed. Communication and energy supply are realized wireless via the electromagnetic field of a RFID transmitter. The passive RFID based sensors are embedded into the concrete to enable the monitoring of moisture transport in porous materials. Results of the hydration process are shown.