Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (12)
- Posterpräsentation (8)
- Beitrag zu einem Tagungsband (5)
- Vortrag (4)
- Buchkapitel (1)
- Beitrag zu einem Sammelband (1)
Schlagworte
- Corrosion (4)
- Alumina (3)
- Coating (3)
- Sol-gel (3)
- TEM (3)
- Al2O3 (2)
- Alumosol (2)
- Beschichtung (2)
- Corundum (2)
- Geothermal (2)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (4)
Alumosols in combination with well dispersed corundum were successfully used to form up to 2.5 ìm thick coatings on the Ni-base alloy SC16. These coatings withstood heat treatments at 700 °C in a water vapour containing atmosphere. The heat treatment caused formation of delta-alumina in the coating and diffusion of chromium and titanium into the coating.
The suitability of an Al2O3 coating for corrosion protection on X20Cr13 was evaluated in various artificial geothermal brines, focusing on the influence of different pH (4, 6 and 8) and their chemical compositions on the coating properties. All experiments were performed in the laboratory using autoclaves at 150 ◦C and 1 MPa in deaerated condition for 1 and 7 days. Results showed that the pH of geothermal waters is the most detrimental factor in the transformation of ɣ-Al2O3 and its protective abilities. Delaminations were found in the Coating exposed to geothermal brines with pH 4. FTIR spectra indicated a transformation of ɣ-Al2O3 to boehmite AlOOH after exposure to pH 4 and 6, and bayerite Al(OH)3 was formed after exposure to pH 8. Different Crystal structures of the hydrated Al2O3 also contribute to the stability of the coatings, observed by the SEM- EDX of the surface and cross-section of coatings. This study indicated that ɣ-Al2O3 sol-gel coating presents a promising aspect of corrosion protection in geothermal environment with a neutral pH.
Improved wetting of bare and pre-coated steels by aqueous alumina sols for optimum coating success
(2010)
Alumina coatings are a promising candidate for
the protection of metals prone to high temperature corrosion.
If applied via sol–gel process, especially by using so
called aqueous modified Yoldas-sols, the deposition is
hardened by differences in surface free energy of substrate
and sol. In this paper the apparent surface properties of
samples to be coated and sols were examined by contact
angle measurements, IR-spectroscopy and tensiometry.
The results imply, after consideration of possible uncertainties,
the use of surface tension reducing 2-butanol
already present during hydrolysis of the sols to obtain an
easy and successful coating process.
Sol-Gel-Aluminiumoxidschichten für den Oxidationsschutz von Hochtemperaturlegierungen, Teil 2
(2009)
Sol-Gel-Aluminiumoxidschichten für den Oxidationsschutz von Hochtemperaturlegierungen, Teil 1
(2009)
Aufgrund der demographischen Entwicklung und dem damit verbundenen gesteigertem Bedarf an Medikamenten besteht in Deutschland das Problem des Eintrags von Rückständen und Transformationsprodukten über das Abwasser in die Umwelt. In herkömmlichen Reinigungsverfahren werden Medikamentenrückstände häufig unvollständig entfernt oder in andere teilweise toxischere Verbindungen umgewandelt (z. B. durch Ozonierung). Eine perspektivisch aussichtsreiche Möglichkeit zur Beseitigung dieser Schadstoffe ist die Oxidation zu Wasser und Kohlendioxid durch Bestrahlung des vorgeklärten Abwassers mit UV-Licht in Gegenwart von Photokatalysatoren wie z. B. TiO2.
Für vergleichende Untersuchungen der photokalalytischen Aktivität von TiO2-Submikro- und Nanopulvern im Labormaßstab wurde Methylenblau als Modellsubstanz gewählt. Kommerziell erhältliche TiO2-Pulver wurden Testlösungen zugesetzt und der zeitlich fortschreitende Abbau von Methylenblau unter Bestrahlung mit UV-Licht in beobachtet. Für die technische Nutzung der photokatalytischen Abwaserreinigung ist die Immobilisierung der eingesetzten Pulver mit der Möglichkeit der Rückgewinnung erforderlich, sowohl aus Umweltschutzgründen als auch für die Wirtschaftlichkeit des Verfahrens.
Aufbaugranulation wurde als ein prinzipiell auch großtechnisch realisierbares Verfahren der Immobilisierung gewählt. In einem Intensivmischer wurden Granulate auf der Basis von Submikrometer-SiO2 unter Verwendung eines anorganischen Binders hergestellt. Das photokatalytisch aktive TiO2 wurde in Anteilen von 10-25 Ma.-% entweder dem Ausgangspulver zugemischt oder am Ende des Granulierprozesses als Granulat-Coating aufgebracht. Eine Temperung der Granalien bei Temperaturen von maximal 300°C – 500°C erwies sich als ausreichend, um deren Stabilität beim Einsatz in Methylenblau-Lösung im Batch-Verfahren zu gewährleisten.
Tests zum Einsatz der SiO2-TiO2-Granulate als Photokatalysatoren zum Abbau von Methylenblau-Lösungen unter UV-Bestrahlung verliefen erfolgreich. Es konnte gezeigt werden, dass sich die Granalien nach erfolgtem Farbstoffstoff-Abbau aus den Lösungen rückgewinnen und erneut verwenden ließen. Die recycelten Granulate wiesen eine ähnliche photokatalytische Aktivität wie frisch hergestellte auf.