Filtern
Dokumenttyp
- Handbuch (3)
- Zeitschriftenartikel (1)
Schlagworte
- Monitoring (4) (entfernen)
Organisationseinheit der BAM
This specification describes how corrosion monitoring is used to check the condition of reinforced and prestressed concrete members. In this specification, the term "corrosion monitoring" covers all methods in which it is possible to continuously track corrosion-relevant variables in the area of stationary, built-in sensors. This specification does not cover other possible methods, such as potential field measurements, involving the use of mobile, portable sensors that are placed temporarily on the membersurface to take measurements.
Der Chloridgehalt, ab dem bei der Bewehrung im Beton mit Korrosion gerechnet werden muss, wird als kritischer Chloridgehalt bezeichnet. Die Höhe dieses kritischen Chloridgehaltes bestimmt in hohem Maße den Instandsetzungsumfang und damit die Instandsetzungskosten. Zahlreiche Labor- und Bauwerksuntersuchungen belegen, dass dieser kritische Chloridgehalt von einer Vielzahl von Parametern abhängt und deswegen kein fester Wert sein kann. Aus diesem Grund ist es sinnvoll, über Betrachtung von Korrosions- bzw. Depassivierungswahrscheinlichkeiten einen unteren kritischen Chloridgehalt zu bestimmen, bei dem bei gegebenen Randbedingungen nur mit einer geringen Wahrscheinlichkeit (z. B. 5%-Fraktilwert) Korrosion von Stahl in Beton zu erwarten ist. Die Auswertung von zahlreichen Untersuchungen zeigt, dass der Ansatz eines kritischen Chloridgehaltes von 0, 5 M.-% bezogen auf den Zementgehalt bei Einhaltung bestimmter Randbedingungen mit einer hinreichend geringen Korrosionswahrscheinlichkeit korreliert und somit auch in Übereinstimmung mit der Richtlinie 'Schutz und Instandsetzung von Betonbauteilen' des DAfStb als unterer kritischer Chloridgehalt unter Praxisbedingungen anzusetzen ist.
Electrochemical half-cell potential measurements for the detection of reinforcement corrosion
(2014)
This specification describes the application of electrochemical half‐cell potential measurements (frequently also called potential mapping) for the detection of reinforcement corrosion in reinforced concrete structures. Areas of corroding reinforcement steel can be located in a nondestructive manner by means of this procedure. Half‐cell potential measurements are used in order to detect chloride‐induced corrosion. However, it is not recommended in order to assess the risk of carbonation‐induced corrosion. For this purpose the determination of the carbonation depth and the concrete cover appear to be more appropriate.
The content of this specification exclusively refers to the application of mobile, local variable reference electrodes, which are only placed on the concrete surface while measuring. The technique distinguishes itself thereby from the range of corrosion monitoring systems with stationary installed reference electrodes and sensor systems, respectively, whereby it is possible to continuously track measurements within the area of the installed electrodes. However, these methods are not dealt with in this specification.