Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (45) (entfernen)
Referierte Publikation
- ja (45) (entfernen)
Schlagworte
- Microstructure (8)
- Creep (5)
- Aging (4)
- Fatigue (4)
- Additive Manufacturing (3)
- Cast iron (3)
- Residual stress (3)
- AGIL (2)
- AISI 316L (2)
- Additive manufacturing (2)
- Aluminum alloys (2)
- Cyclic softening (2)
- Elasticity (2)
- Electron microscopy (2)
- Fatigue damage (2)
- GMR (2)
- Metal magnetic memory (2)
- Number density (2)
- Ostwald ripening (2)
- P92 (2)
- Phase-field simulation (2)
- Plastic deformation (2)
- Precipitation (2)
- S-Phase (2)
- Stress relaxation (2)
- Tempered martensite-ferritic steel (2)
- Tensile strength (2)
- Thermo-mechanical fatigue (2)
- Thermomechanical fatigue (2)
- Ti-6Al-4V (2)
- Volume fraction (2)
- 316L (1)
- 9-12%Cr steel (1)
- Acoustic emission (1)
- Advanced ceramic (1)
- Age hardening (1)
- Al-Cu alloy (1)
- Al-Cu-Li-alloy (1)
- Aluminum alloy (1)
- Al‐Cu‐Li‐alloy (1)
- Automated image analysis (1)
- Axial-torsional Loading (1)
- Axial-torsional loading (1)
- Bitter technique (1)
- Brinell hardness (1)
- Carbon capture and storage (CCS) (1)
- Casting skin (1)
- Ceramics (1)
- Characterisation (1)
- Chemo-mechanical coupling (1)
- Computed Tomography (1)
- Corrosion behaviour (1)
- Cracks (1)
- Creep behavior (1)
- Creep strength (1)
- Creep testing (1)
- Creep-fatigue (1)
- Creep-fatigue interaction (1)
- Crystal plasticity (1)
- Damage (1)
- Damage analysis (1)
- Data Interoperability (1)
- Data infrastructures (1)
- Data mapping (1)
- Deformation (1)
- Differential scanning calorimetry (DSC) (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital workflows (1)
- Domain Ontology Development (1)
- Dwell periods (1)
- Dwell times (1)
- EN AW-2618A (1)
- Elastic modulus (1)
- Emission coefficient (1)
- Environment (1)
- Expanding cavity model (1)
- FAIR (1)
- FAIR Data Management (1)
- FAIR research data management (1)
- Fatigue assessment (1)
- Fatigue life time (1)
- Ferritic–martensitic steel (1)
- Fossil fuel power plants (1)
- Fracture (1)
- Gamma titanium aluminide (1)
- Gamma-Titanium Aluminide (1)
- General Computer Science (1)
- General Engineering (1)
- General Materials Science (1)
- Growth kinetics (1)
- Hall-Petch relationship (1)
- Heat resistant steels (1)
- Heat treatment (1)
- High Cycle Fatigue (HCF) (1)
- High efficiency power plants (1)
- Hocheffiziente Kraftwerke (1)
- IN 718 (1)
- In-situ Process Monitoring (1)
- Inconel 718 (1)
- Indentation (1)
- Industrial and Manufacturing Engineering (1)
- Interfacial anisotropy (1)
- Isothermal fatigue (1)
- Knowledge Representation (1)
- Knowledge graphs (1)
- Kohlendioxidabscheidung und -speicherung (CCS) (1)
- Korrosionsverhalten (1)
- Laser Powder Bed Fusion (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser beam melting (LBM) (1)
- Laser irradiation (1)
- Laser powder bed fusion (1)
- Laser powder-based directed energy deposition (1)
- Laser-thermal shock (1)
- Life time prediction (1)
- Lifetime (1)
- Long-term aging (1)
- Low carbon steel (1)
- Low cycle fatigue (1)
- Low strain (1)
- Low-cycle fatigue (1)
- Magnetic domain distribution (1)
- Magnetic stray fields (1)
- Magneto-optical sensor (1)
- Magnetomechanical effect (1)
- Materials Testing (1)
- Materials informatics (1)
- Mechanical anisotropy (1)
- Mechanical properties (1)
- Mechanische Eigenschaften (1)
- Metal matrix composites (1)
- Microscopy (1)
- Microstructure evolution (1)
- Miniature specimen (1)
- Misfitting precipitate (1)
- Molybdenum (1)
- Multiaxial deformation (1)
- Multi‐component diffusion (1)
- NDT (1)
- Neutron diffraction (1)
- Nickel-base alloy (1)
- Non-destructive Materials (1)
- Notch (1)
- Ontologies (1)
- Ontology (1)
- P91 (1)
- PBF-LB/M/316L (1)
- Parametric modeling (1)
- Phase‐field modeling (1)
- Precipitate shape (1)
- Precipitates (1)
- Process development (1)
- Radiation thermometry (1)
- Reference data (1)
- Reheating (1)
- Relaxation fatigue (1)
- Reproducibility (1)
- S-phase (1)
- Safety (1)
- Selective laser melting (SLM) (1)
- Semantic Web Technologies (1)
- Shear modulus (1)
- Size effects (1)
- Solid solution softening (1)
- Solid solution strengthening (1)
- Standardisation (1)
- Strain difference (1)
- Stress distribution (1)
- Structural steel (1)
- Symmetric dwell periods (1)
- T1 precipitate (1)
- TIG weld (1)
- TMF (1)
- TNB-V5 (1)
- Temperature dependence (1)
- Temperature measurement (1)
- Tempered martensite ferritic steels (1)
- Tensile Test Ontology (1)
- Tensile properties (1)
- Thermal barrier coating (TBC) (1)
- Thermal shock (1)
- Thermal shock stress (1)
- Thermo-mechanical Fatigue (1)
- Thermography (1)
- Thermomechanical Fatigue (TMF) (1)
- Thermomechanical Fatigue (TMF); High Cycle Fatigue (HCF); Cast iron; Fatigue assessment (1)
- Thermomechanical fatigue (TMF) (1)
- Thickening (1)
- Titanium alloys (1)
- Topography (1)
- Transmission electron microscopy (1)
- Transmission electron microscopy (TEM) (1)
- Visual ontology development (1)
- Vocabulary providers (1)
- Warmfeste Stähle (1)
- Weibull statistics (1)
- Young's modulus (1)
- Yttria stabilized zirconia (1)
- microstructural changes (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (25)
- 5.2 Metallische Hochtemperaturwerkstoffe (25)
- 8 Zerstörungsfreie Prüfung (9)
- 9 Komponentensicherheit (8)
- 5.1 Mikrostruktur Design und Degradation (7)
- 5.5 Materialmodellierung (6)
- 8.5 Röntgenbildgebung (6)
- 9.6 Additive Fertigung metallischer Komponenten (4)
- 8.0 Abteilungsleitung und andere (3)
- 9.3 Schweißtechnische Fertigungsverfahren (3)
- 9.4 Integrität von Schweißverbindungen (3)
- 1 Analytische Chemie; Referenzmaterialien (1)
- 1.3 Instrumentelle Analytik (1)
- 4 Material und Umwelt (1)
- 4.2 Material-Mikrobiom Wechselwirkungen (1)
- 5.4 Multimateriale Fertigungsprozesse (1)
- 7 Bauwerkssicherheit (1)
- 7.7 Modellierung und Simulation (1)
- 8.4 Akustische und elektromagnetische Verfahren (1)
- S Qualitätsinfrastruktur (1)
- S.0 Abteilungsleitung und andere (1)
- VP Vizepräsident (1)
- VP.1 eScience (1)
TMF tests were carried out on EN-GJSA-XNiSiCr35-5-2 at constant minimum temperature (400 °C) and varying maximum temperatures (Tmax = 700 °C, 800 °C, 900 °C) with hold times of 180 s at Tmax and two phase angles (in-phase (IP), 180° out-of-phase (OP)). The results showed a comparable strength under OP- and IP-TMF loading. At Tmax = 700 °C and 900 °C, the lifetime in IP-tests was slightly longer than that of OP-tests, while it is vice versa at Tmax = 800 °C. The IP-tests at Tmax = 900 °C showed a similar lifetime as OP-tests at Tmax = 700 °C and 800 °C, which was unexpected for such a high testing temperature. All IP-tests at Tmax = 900 °C showed a continuous cyclic softening from the beginning on, which was different from all other testing conditions. Complementary metallographic investigations indicated that under this test condition, intergranular creep damage is present in the volume of the test pieces.
The digitalization of materials science and engineering (MSE) is currently leading to remarkable advancements in materials research, design, and optimization, fueled by computer‐driven simulations, artificial intelligence, and machine learning. While these developments promise to accelerate materials innovation, challenges in quality assurance, data interoperability, and data management have to be addressed. In response, the adoption of semantic web technologies has emerged as a powerful solution in MSE. Ontologies provide structured and machine‐actionable knowledge representations that enable data integration, harmonization, and improved research collaboration. This study focuses on the tensile test ontology (TTO), which semantically represents the mechanical tensile test method and is developed within the project Plattform MaterialDigital (PMD) in connection with the PMD Core Ontology. Based on ISO 6892‐1, the test standard‐compliant TTO offers a structured vocabulary for tensile test data, ensuring data interoperability, transparency, and reproducibility. By categorizing measurement data and metadata, it facilitates comprehensive data analysis, interpretation, and systematic search in databases. The path from developing an ontology in accordance with an associated test standard, converting selected tensile test data into the interoperable resource description framework format, up to connecting the ontology and data is presented. Such a semantic connection using a data mapping procedure leads to an enhanced ability of querying. The TTO provides a valuable resource for materials researchers and engineers, promoting data and metadata standardization and sharing. Its usage ensures the generation of finable, accessible, interoperable, and reusable data while maintaining both human and machine actionability.
Experimental and phase field studies of age hardening response of a high purity Al‐4Cu‐1Li‐0.25Mn‐alloy (mass %) during isothermal aging are conducted. In the experiments, two hardening phases are identified: the tetragonal θ′ (Al₂Cu) phase and the hexagonal T1 (Al₂CuLi) phase. Both are plate shaped and of nm size. They are analyzed with respect to the development of their size, number density and volume fraction during aging by applying different analysis techniques in TEM in combination with quantitative microstructural analysis. 3D phase‐field simulations of formation and growth of θ′ phase are performed in which the full interfacial, chemical and elastic energy contributions are taken into account. 2D simulations of T1 phase are also investigated using multi‐component diffusion without elasticity. This is a first step toward a complex phase‐field study of T1 phase in the ternary alloy. The comparison between experimental and simulated data shows similar trends. The still unsaturated volume fraction indicates that the precipitates are in the growth stage and that the coarsening/ripening stage has not yet been reached.
The age hardening response of a high-purity Al–4Cu–1Li–0.25Mn alloy (wt. %) during isothermal aging without and with an applied external load was investigated. Plate shaped nanometer size T1 (Al2CuLi) and θ′ (Al2Cu) hardening phases were formed. The precipitates were analyzed with respect to the development of their structure, size, number density, volume fraction and associated transformation strains by conducting transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) studies in combination with geometrical Phase analysis (GPA). Special attention was paid to the thickening of T1 phase. Two elementary types of single-layer T1 precipitate, one with a Li-rich (Type 1) and another with an Al-rich (Defect Type 1) central layer, were identified. The results show that the Defect Type 1 structure can act as a precursor for the Type 1 structure. The thickening of T1 precipitates occurs by alternative stacking of These two elementary structures. The thickening mechanism was analyzed based on the magnitude of strain associated with the precipitation transformation normal to its habit plane. Long-term aging and aging under load resulted in thicker and structurally defected T1 precipitates. Several types of defected precipitates were characterized and discussed. For θ′ precipitates, a ledge mechanism of
thickening was observed. Compared to the normal aging, an external load applied to the peak aged state leads to small variations in the average sizes and volume fractions of the precipitates.
The effectiveness of the mechanism of precipitation strengthening in metallic alloys depends on the shapes of the precipitates. Two different material systems are considered: tetragonal γ′′ precipitates in Ni-based alloys and tetragonal θ′ precipitates in Al-Cu-alloys. The shape formation and evolution of the tetragonally misfitting precipitates was investigated by means of experiments and phase-field simulations. We employed the method of invariant moments for the consistent shape quantification of precipitates obtained from the simulation as well as those obtained from the experiment. Two well-defined shape-quantities are proposed: (i) a generalized measure for the particles aspect ratio and (ii) the normalized λ2, as a measure for shape deviations from an ideal ellipse of the given aspect ratio. Considering the size dependence of the aspect ratio of γ′′ precipitates, we find good agreement between the simulation results and the experiment. Further, the precipitates’ in-plane shape is defined as the central 2D cut through the 3D particle in a plane normal to the tetragonal c-axes of the precipitate. The experimentally observed in-plane shapes of γ′′-precipitates can be quantitatively reproduced by the phase-field model.
Simulation of the θ′ Precipitation Process with Interfacial Anisotropy Effects in Al-Cu Alloys
(2021)
The effects of anisotropic interfacial properties and heterogeneous elasticity on the growth and ripening of plate-like θ′-phase (Al2Cu) in Al-1.69 at.% Cu alloy are studied. Multi-phase-field simulations are conducted and discussed in comparison with aging experiments. The precipitate/matrix interface is considered to be anisotropic in terms of its energy and mobility. We find that the additional incorporation of an anisotropic interfacial mobility in conjunction with the elastic anisotropy result in substantially larger aspect ratios of the precipitates closer to the experimental observations. The anisotropy of the interfacial energy shows comparably small effect on the precipitate’s aspect ratio but changes the interface’s shape at the rim. The effect of the chemo-mechanical coupling, i.e., the composition dependence of the elastic constants, is studied as well. We show that the inverse ripening phenomenon, recently evidenced for δ’ precipitates in Al-Li alloys (Park et al. Sci. Rep. 2019, 9, 3981), does not establish for the θ′ precipitates. This is because of the anisotropic stress fields built around the θ′ precipitates, stemming from the precipitate’s shape and the interaction among different variants of the θ′ precipitate, that disturb the chemo-mechanical effects. These results show that the chemo-mechanical effects on the precipitation ripening strongly depend on the degree of sphericity and elastic isotropy of the precipitate and matrix phases.
The aluminum alloy 2618A is applied for engine components such as radial compressor wheels which operate for long time at elevated temperatures. This results in coarsening of the hardening precipitates and degradation in mechanical properties during the long-term operation, which is not taken into account in the current lifetime prediction models due to the lack of quantitative microstructural and mechanical data. To address this issue, a quantitative investigation on the evolution of precipitates during long-term aging at 190 °C for up to 25,000 h was conducted. Detailed transmission electron microscopy (TEM) was combined with Brinell hardness measurements and thorough differential scanning calorimetry (DSC) experiments. The results showthat GPB zones and S-phase Al2CuMg grow up to < 1,000 h during which the GPB zones dissolve and S-phase precipitates form. For longer aging times, only S-phase precipitates coarsen, which can be well described using the Lifshitz–Slyozov Wagner theory of ripening. A thorough understanding of the underlying microstructural processes is a prerequisite to enable the integration of aging behavior into the established lifetime models for components manufactured from alloy 2618A.
The amount of data generated worldwide is constantly increasing. These data come from a wide variety of sources and systems, are processed differently, have a multitude of formats, and are stored in an untraceable and unstructured manner, predominantly in natural language in data silos. This problem can be equally applied to the heterogeneous research data from materials science and engineering. In this domain, ways and solutions are increasingly being generated to smartly link material data together with their contextual information in a uniform and well-structured manner on platforms, thus making them discoverable, retrievable, and reusable for research and industry. Ontologies play a key role in this context. They enable the sustainable representation of expert knowledge and the semantically structured filling of databases with computer-processable data triples.
In this perspective article, we present the project initiative Materials-open-Laboratory (Mat-o-Lab) that aims to provide a collaborative environment for domain experts to digitize their research results and processes and make them fit for data-driven materials research and development. The overarching challenge is to generate connection points to further link data from other domains to harness the promised potential of big materials data and harvest new knowledge.
This article refers to the research article entitled “Creep-Fatigue of P92 in Service-Like Tests with Combined Stress- and Strain-Controlled Dwell Times” [1]. It presents experimental mechanical data from complex service-like creep-fatigue experiments performed isothermally at 620 °C and a low strain amplitude of 0.2 % on tempered martensite-ferritic grade P92 steel. The data sets in text file format provide cyclic deformation (min. and max. stresses) and the total (hysteresis) data of all recorded fatigue cycles for three different creep-fatigue experiments: 1) a standard relaxation fatigue (RF) test with symmetrical dwell times of three minutes introduced at minimum and maximum strain, 2) a fully strain-controlled service-like relaxation (SLR) test combining these three-minute peak strain dwells with a 30-minute dwell in between at zero strain, and 3) a partly stress-controlled service-like creep (SLC) test combining the three-minute peak strain dwells with 30-minute dwells at constant stress. Such service-like (SL) tests with additional long-term stress- and strain-controlled dwell times are non-standard, rare, and expensive, making these data very valuable. They may be used to approximate cyclic softening in the technically relevant range, for the design of complex SL experiments, or for detailed analyses of stress-strain hystereses (e.g., for stress or strain partitioning methods, for the determination of hysteresis energies (work), inelastic strain components, etc.). In addition, the latter analyses may supply important input for advanced parametric lifetime modeling of components under creep-fatigue loading or model calibration parameters.
AbstractHigh-strength aluminum alloys used in aerospace and automotive applications obtain their strength through precipitation hardening. Achieving the desired mechanical properties requires precise control over the nanometer-sized precipitates. However, the microstructure of these alloys changes over time due to aging, leading to a deterioration in strength. Typically, the size, number, and distribution of precipitates for a quantitative assessment of microstructural changes are determined by manual analysis, which is subjective and time-consuming. In our work, we introduce a progressive and automatable approach that enables a more efficient, objective, and reproducible analysis of precipitates. The method involves several sequential steps using an image repository containing dark-field transmission electron microscopy (DF-TEM) images depicting various aging states of an aluminum alloy. During the process, precipitation contours are generated and quantitatively evaluated, and the results are comprehensibly transferred into semantic data structures. The use and deployment of Jupyter Notebooks, along with the beneficial implementation of Semantic Web technologies, significantly enhances the reproducibility and comparability of the findings. This work serves as an exemplar of FAIR image and research data management.