Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (45) (entfernen)
Referierte Publikation
- ja (45) (entfernen)
Schlagworte
- Microstructure (8)
- Creep (5)
- Aging (4)
- Fatigue (4)
- Additive Manufacturing (3)
- Cast iron (3)
- Residual stress (3)
- AGIL (2)
- AISI 316L (2)
- Additive manufacturing (2)
- Aluminum alloys (2)
- Cyclic softening (2)
- Elasticity (2)
- Electron microscopy (2)
- Fatigue damage (2)
- GMR (2)
- Metal magnetic memory (2)
- Number density (2)
- Ostwald ripening (2)
- P92 (2)
- Phase-field simulation (2)
- Plastic deformation (2)
- Precipitation (2)
- S-Phase (2)
- Stress relaxation (2)
- Tempered martensite-ferritic steel (2)
- Tensile strength (2)
- Thermo-mechanical fatigue (2)
- Thermomechanical fatigue (2)
- Ti-6Al-4V (2)
- Volume fraction (2)
- 316L (1)
- 9-12%Cr steel (1)
- Acoustic emission (1)
- Advanced ceramic (1)
- Age hardening (1)
- Al-Cu alloy (1)
- Al-Cu-Li-alloy (1)
- Aluminum alloy (1)
- Al‐Cu‐Li‐alloy (1)
- Automated image analysis (1)
- Axial-torsional Loading (1)
- Axial-torsional loading (1)
- Bitter technique (1)
- Brinell hardness (1)
- Carbon capture and storage (CCS) (1)
- Casting skin (1)
- Ceramics (1)
- Characterisation (1)
- Chemo-mechanical coupling (1)
- Computed Tomography (1)
- Corrosion behaviour (1)
- Cracks (1)
- Creep behavior (1)
- Creep strength (1)
- Creep testing (1)
- Creep-fatigue (1)
- Creep-fatigue interaction (1)
- Crystal plasticity (1)
- Damage (1)
- Damage analysis (1)
- Data Interoperability (1)
- Data infrastructures (1)
- Data mapping (1)
- Deformation (1)
- Differential scanning calorimetry (DSC) (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital workflows (1)
- Domain Ontology Development (1)
- Dwell periods (1)
- Dwell times (1)
- EN AW-2618A (1)
- Elastic modulus (1)
- Emission coefficient (1)
- Environment (1)
- Expanding cavity model (1)
- FAIR (1)
- FAIR Data Management (1)
- FAIR research data management (1)
- Fatigue assessment (1)
- Fatigue life time (1)
- Ferritic–martensitic steel (1)
- Fossil fuel power plants (1)
- Fracture (1)
- Gamma titanium aluminide (1)
- Gamma-Titanium Aluminide (1)
- General Computer Science (1)
- General Engineering (1)
- General Materials Science (1)
- Growth kinetics (1)
- Hall-Petch relationship (1)
- Heat resistant steels (1)
- Heat treatment (1)
- High Cycle Fatigue (HCF) (1)
- High efficiency power plants (1)
- Hocheffiziente Kraftwerke (1)
- IN 718 (1)
- In-situ Process Monitoring (1)
- Inconel 718 (1)
- Indentation (1)
- Industrial and Manufacturing Engineering (1)
- Interfacial anisotropy (1)
- Isothermal fatigue (1)
- Knowledge Representation (1)
- Knowledge graphs (1)
- Kohlendioxidabscheidung und -speicherung (CCS) (1)
- Korrosionsverhalten (1)
- Laser Powder Bed Fusion (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser beam melting (LBM) (1)
- Laser irradiation (1)
- Laser powder bed fusion (1)
- Laser powder-based directed energy deposition (1)
- Laser-thermal shock (1)
- Life time prediction (1)
- Lifetime (1)
- Long-term aging (1)
- Low carbon steel (1)
- Low cycle fatigue (1)
- Low strain (1)
- Low-cycle fatigue (1)
- Magnetic domain distribution (1)
- Magnetic stray fields (1)
- Magneto-optical sensor (1)
- Magnetomechanical effect (1)
- Materials Testing (1)
- Materials informatics (1)
- Mechanical anisotropy (1)
- Mechanical properties (1)
- Mechanische Eigenschaften (1)
- Metal matrix composites (1)
- Microscopy (1)
- Microstructure evolution (1)
- Miniature specimen (1)
- Misfitting precipitate (1)
- Molybdenum (1)
- Multiaxial deformation (1)
- Multi‐component diffusion (1)
- NDT (1)
- Neutron diffraction (1)
- Nickel-base alloy (1)
- Non-destructive Materials (1)
- Notch (1)
- Ontologies (1)
- Ontology (1)
- P91 (1)
- PBF-LB/M/316L (1)
- Parametric modeling (1)
- Phase‐field modeling (1)
- Precipitate shape (1)
- Precipitates (1)
- Process development (1)
- Radiation thermometry (1)
- Reference data (1)
- Reheating (1)
- Relaxation fatigue (1)
- Reproducibility (1)
- S-phase (1)
- Safety (1)
- Selective laser melting (SLM) (1)
- Semantic Web Technologies (1)
- Shear modulus (1)
- Size effects (1)
- Solid solution softening (1)
- Solid solution strengthening (1)
- Standardisation (1)
- Strain difference (1)
- Stress distribution (1)
- Structural steel (1)
- Symmetric dwell periods (1)
- T1 precipitate (1)
- TIG weld (1)
- TMF (1)
- TNB-V5 (1)
- Temperature dependence (1)
- Temperature measurement (1)
- Tempered martensite ferritic steels (1)
- Tensile Test Ontology (1)
- Tensile properties (1)
- Thermal barrier coating (TBC) (1)
- Thermal shock (1)
- Thermal shock stress (1)
- Thermo-mechanical Fatigue (1)
- Thermography (1)
- Thermomechanical Fatigue (TMF) (1)
- Thermomechanical Fatigue (TMF); High Cycle Fatigue (HCF); Cast iron; Fatigue assessment (1)
- Thermomechanical fatigue (TMF) (1)
- Thickening (1)
- Titanium alloys (1)
- Topography (1)
- Transmission electron microscopy (1)
- Transmission electron microscopy (TEM) (1)
- Visual ontology development (1)
- Vocabulary providers (1)
- Warmfeste Stähle (1)
- Weibull statistics (1)
- Young's modulus (1)
- Yttria stabilized zirconia (1)
- microstructural changes (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (25)
- 5.2 Metallische Hochtemperaturwerkstoffe (25)
- 8 Zerstörungsfreie Prüfung (9)
- 9 Komponentensicherheit (8)
- 5.1 Mikrostruktur Design und Degradation (7)
- 5.5 Materialmodellierung (6)
- 8.5 Röntgenbildgebung (6)
- 9.6 Additive Fertigung metallischer Komponenten (4)
- 8.0 Abteilungsleitung und andere (3)
- 9.3 Schweißtechnische Fertigungsverfahren (3)
- 9.4 Integrität von Schweißverbindungen (3)
- 1 Analytische Chemie; Referenzmaterialien (1)
- 1.3 Instrumentelle Analytik (1)
- 4 Material und Umwelt (1)
- 4.2 Material-Mikrobiom Wechselwirkungen (1)
- 5.4 Multimateriale Fertigungsprozesse (1)
- 7 Bauwerkssicherheit (1)
- 7.7 Modellierung und Simulation (1)
- 8.4 Akustische und elektromagnetische Verfahren (1)
- S Qualitätsinfrastruktur (1)
- S.0 Abteilungsleitung und andere (1)
- VP Vizepräsident (1)
- VP.1 eScience (1)
This study investigates the room‐ and high‐temperature (650 °C) tensile and low‐cycle‐fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF‐LB/M) with a four‐step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF‐LB/M variant at room temperature is slightly lower than that of the wrought material, while at 650 °C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (≥0.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF‐LB/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local crystallite clusters.
A titanium (Ti-6242) matrix composite reinforced with continuous SiC fibers was studied. The mechanical behavior of the matrix and the composite was characterized by tensile, creep and isothermal fatigue tests at room temperature and up to 550°C. The thermo-mechanical fatigue behavior under in-phase and out-of-phase conditions was investigated for the composite between 100 and 550°C. Fracture surfaces were characterized by confocal light microscopy and by scanning electron microscopy to identify the damage mechanisms.
Thermal barrier coatings (TBCs) are used to increase the operating temperature of land-, sea-, or air-based turbines. As failure of the coating may result in serious damage of the turbine, reliable estimation of the lifetime is essential. Most experiments to assess the lifetime or to determine parameters for simulations of the behavior of TBCs are done by burner-rig-tests, where the operating conditions are simulated by cyclic heating of the surface and cooling of the backside of a coated sample.
In this work a possibility is presented to do comparable experiments by heating the surface with laser irradiation instead of a burner. For this purpose a Nd:YAG-laser with a maximum output power of 1?kW and a wavelength of 1064?nm is used. The laser spot can be moved by integrated optics across the sample surface to achieve homogeneous heating of the coating. Cooling of the backside is done by air. The temperature of the sample surface is determined by an infrared-camera which also enables the possibility to detect failures in the coating via thermography. Additionally, acoustic sensors attached to the sample holder are used to detect failures in the sample. The investigated ceramic material (yttria stabilized zirconia) has a very low absorption coefficient at the used laser wavelength. Therefore, a pre-treatment of the samples was needed to increase the absorption coefficient to be able to heat up the samples.
In this paper, the experimental setup and first experimental results are presented.
Thermal barrier coatings allow increasing the operating temperature and efficiency of land-, sea-, or air-based turbines. As failure of the coating may result in serious damage of the turbine, reliable estimation of its lifetime is essential. To assess the lifetime, cyclic tests are conceived to combine thermal loading by heating the surface of the coating with laser irradiation and nondestructive methods for damage determination. Using laser irradiation allows a high reproducibility of the thermal load. The temperature of the sample surface during thermal loading is determined by an infrared-camera which also enables the possibility to detect damage in the coating via thermography. Additionally, four acoustic sensors, attached to the experimental setup, are used to detect damage in the sample and determine the source of acoustic events. Results of acoustic emission correlate well with thermographic images that visualize the formation and evolution of damage through delaminations in the samples.
The continuing increase of steam parameters of fossil fuelled high efficiency power plants and new combustion concepts for the capture and storage of carbon dioxide lead to harsher service conditions for the components and structural materials of such facilities. The present work introduces a test concept that allows testing of candidate materials under simultaneous mechanical and corrosive loading. The material's reaction can be directly investigated under simulated temperature, load and corrosion conditions of modern installations. First results obtained for different heat resistant steels suggest a strong influence of the environmental medium on the fatigue and creep behaviour. Such findings complement the data that is available from the classical qualification process of the materials and may support the material selection for new power plant installations.
Experimental and analytical investigation of the TMF-HCF lifetime behavior of two cast iron alloys
(2017)
The combined loading Thermomechanical Fatigue (TMF) with High Cycle Fatigue (HCF) has been experimentally investigated for two cast iron alloys. Both alloys contain globular graphite nodules but the first one has a ferritic structure while the second one has an austenitic crystal structure. In particular, the influences of the HCF frequency, of the HCF loading amplitude and of the location of the superposed HCF cycles have been investigated. It was observed that the HCF frequency has a limited impact on the fatigue life. On the other side, the HCF-strain amplitude has a highly non-linear influence on the fatigue life. The experimental results can be understood in terms of a fracture mechanics based damage mechanism: Cracks quickly initiate due to the TMF loading and the growth of the cracks up to a few mm controls the fatigue life. If HCF-loading cycles are superposed, cyclic crack propagation dramatically accelerates after a threshold has been reached. This threshold is regarded as controlling the fatigue life reduction. The previous ideas have been expressed in a model that can be very simply applied to estimate the fatigue life reduction ratio due to the superposed HCF cycles. It only contains two adjustable parameters and can be combined with any TMF life assessment model.
This article reports temperature-dependent elastic properties (Young’s modulus, shear modulus) of three alloys measured by the dynamic resonance method. The alloys Ti-6Al-4V, Inconel IN718, and AISI 316 L were each investigated in a variant produced by an additive manufacturing processing route and by a conventional manufacturing processing route. The datasets include information on processing routes and parameters, heat treatments, grain size, specimen dimensions, and weight, as well as Young’s and shear modulus along with their measurement uncertainty. The process routes and methods are described in detail. The datasets were generated in an accredited testing lab, audited as BAM reference data, and are hosted in the open data repository Zenodo. Possible data usages include the verification of the correctness of the test setup via Young’s modulus comparison in low-cycle fatigue (LCF) or thermo-mechanical fatigue (TMF) testing campaigns, the design auf VHCF specimens and the use as input data for simulation purposes.
Modeling the lifetime reduction due to the superposition of TMF and HCF loadings in cast iron alloys
(2016)
The superposition of small amplitude, high frequency loading cycles (HCF) to slow, large amplitude loading cycles (TMF) can significantly reduce the fatigue life. In this work, the combined TMF+HCF loading has been experimentally investigated for a cast iron alloy. In particular, the influence of the HCF frequency of the HCF amplitude and of the location of the superposed HCF cycles has been assessed. It was observed that the HCF frequency has a limited impact on the TMF fatigue life. On the other side, the HCF-strain amplitude has a highly non-linear influence on the TMF fatigue life. A simple estimate for the fatigue life reduction due to the superposed HCF cycles has been derived from fracture mechanics considerations. It is assumed that the number of propagation cycles up to failure can be neglected after a threshold for the HCF loading has been reached. The model contains only two adjustable parameters and can be combined with any TMF life prediction model. The model predictions are compared with the test results for a large range of TMF+HCF loading conditions.
The determination of critical failure parameters during thermal shock requires a time and space resolved temperature measurement of the sample. High frequency pyrometry is a suitable technique for such a measurement task, which usually requires the knowledge of the optical properties of the investigated material. Another challenge is the infrared transparency of materials to be checked in the wavelength range of the pyrometer. The thermal shock disks are very thin, due to the need of homogeneous temperature distribution and to maintain a two-dimensional problem. To allow a pyrometric temperature measurement a universal calibration method for high frequency infrared cameras has been developed. Pyrometry in various media was demanded, as well as the estimation of optical properties (reflection, transmittance and emission) for the selected ceramics to be tested.
The thermal shock behavior of three commercial-advanced ceramics (SSiC, MgO–PSZ, Al2O3) is characterized in air and vacuum applying a laser thermal shock. The available testing system permits the reproducible setting of defined temperature profiles in thin disks and allows a heating-up thermal shock in various media. Due to the accurate determination of the time- and space-resolved temperature distribution, the local stress state can be calculated as a function of time. It is shown that the thermal shock strength is highest for SSiC and lowest in Al2O3 with MgO–PSZ in between. The approach presented in this work allows quantifying the stress state at failure in terms of tangential tensile stress. The investigated environment does not affect the thermal shock resistance under the studied experimental conditions.