Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (47)
- Mehrsprachig (2)
Referierte Publikation
- ja (49) (entfernen)
Schlagworte
- Microstructure (8)
- Creep (5)
- Aging (4)
- Fatigue (4)
- Additive Manufacturing (3)
- Cast iron (3)
- Residual stress (3)
- Stress relaxation (3)
- AGIL (2)
- AISI 316L (2)
- Additive manufacturing (2)
- Aluminum alloys (2)
- Cyclic softening (2)
- Elasticity (2)
- Electron microscopy (2)
- Fatigue damage (2)
- GMR (2)
- Metal magnetic memory (2)
- Number density (2)
- Ontologies (2)
- Ostwald ripening (2)
- P92 (2)
- Phase-field simulation (2)
- Plastic deformation (2)
- Precipitation (2)
- S-Phase (2)
- Tempered martensite-ferritic steel (2)
- Tensile strength (2)
- Thermo-mechanical fatigue (2)
- Thermomechanical fatigue (2)
- Ti-6Al-4V (2)
- Volume fraction (2)
- 316L (1)
- 9-12%Cr steel (1)
- Accessible (1)
- Acoustic emission (1)
- Advanced ceramic (1)
- Age hardening (1)
- Al-Cu alloy (1)
- Al-Cu-Li-alloy (1)
- Aluminum alloy (1)
- Al‐Cu‐Li‐alloy (1)
- Anisotropie (1)
- Automated image analysis (1)
- Axial-torsional Loading (1)
- Axial-torsional loading (1)
- Bitter technique (1)
- Brinell hardness (1)
- CKAN (1)
- Carbon capture and storage (CCS) (1)
- Casting skin (1)
- Ceramics (1)
- Characterisation (1)
- Chemo-mechanical coupling (1)
- Computed Tomography (1)
- Corrosion behaviour (1)
- Cracks (1)
- Creep behavior (1)
- Creep strength (1)
- Creep testing (1)
- Creep-fatigue (1)
- Creep-fatigue interaction (1)
- Crystal plasticity (1)
- Damage (1)
- Damage analysis (1)
- Data Interoperability (1)
- Data infrastructures (1)
- Data mapping (1)
- Deformation (1)
- Differential scanning calorimetry (DSC) (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital workflows (1)
- Digitalizations (1)
- Domain Ontology Development (1)
- Dwell periods (1)
- Dwell times (1)
- EN AW-2618A (1)
- Elastic modulus (1)
- Elastische Energie (1)
- Emission coefficient (1)
- Environment (1)
- Expanding cavity model (1)
- FAIR (1)
- FAIR Data Management (1)
- FAIR principles (1)
- FAIR research data management (1)
- Fatigue assessment (1)
- Fatigue life time (1)
- Fatigue testing (1)
- Ferritic–martensitic steel (1)
- Fossil fuel power plants (1)
- Fracture (1)
- Fraktographie (1)
- Gamma titanium aluminide (1)
- Gamma-Titanium Aluminide (1)
- General Computer Science (1)
- General Engineering (1)
- General Materials Science (1)
- Growth kinetics (1)
- Hall-Petch relationship (1)
- Hardness (1)
- Heat resistant steels (1)
- Heat treatment (1)
- High Cycle Fatigue (HCF) (1)
- High efficiency power plants (1)
- Hocheffiziente Kraftwerke (1)
- IN 718 (1)
- In-situ Process Monitoring (1)
- Inconel 718 (1)
- Indentation (1)
- Industrial and Manufacturing Engineering (1)
- Interfacial anisotropy (1)
- Interoperable (1)
- Isothermal fatigue (1)
- Knowledge Representation (1)
- Knowledge graphs (1)
- Kohlendioxidabscheidung und -speicherung (CCS) (1)
- Korrosionsverhalten (1)
- Kriechen (1)
- Laser Powder Bed Fusion (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser beam melting (LBM) (1)
- Laser irradiation (1)
- Laser powder bed fusion (1)
- Laser powder-based directed energy deposition (1)
- Laser-thermal shock (1)
- Life time prediction (1)
- Lifetime (1)
- Long-term aging (1)
- Low carbon steel (1)
- Low cycle fatigue (1)
- Low strain (1)
- Low-Cycle Fatigue (LCF) (1)
- Low-cycle fatigue (1)
- Magnetic domain distribution (1)
- Magnetic stray fields (1)
- Magneto-optical sensor (1)
- Magnetomechanical effect (1)
- Materials Testing (1)
- Materials informatics (1)
- Mechanical anisotropy (1)
- Mechanical properties (1)
- Mechanische Eigenschaften (1)
- Metal matrix composites (1)
- Microscopy (1)
- Microstructure evolution (1)
- Mikrostruktur (1)
- Miniature specimen (1)
- Misfitting precipitate (1)
- Molybdenum (1)
- Multiaxial deformation (1)
- Multi‐component diffusion (1)
- NDT (1)
- Neutron diffraction (1)
- Nickel-base alloy (1)
- Non-destructive Materials (1)
- Notch (1)
- Ontology (1)
- P91 (1)
- PBF-LB/M/316L (1)
- Parametric modeling (1)
- Phase‐field modeling (1)
- Precipitate shape (1)
- Precipitates (1)
- Process development (1)
- Quantitative Analyse (1)
- Radiation thermometry (1)
- Reference data (1)
- Reheating (1)
- Relaxation fatigue (1)
- Reproducibility (1)
- Reusable data (1)
- S-phase (1)
- SSiC (1)
- Safety (1)
- Selective laser melting (SLM) (1)
- Semantic Web Technologies (1)
- Shear modulus (1)
- Size effects (1)
- Solid solution softening (1)
- Solid solution strengthening (1)
- Standardisation (1)
- Strain difference (1)
- Stress distribution (1)
- Structural steel (1)
- Symmetric dwell periods (1)
- T1 precipitate (1)
- TIG weld (1)
- TMF (1)
- TNB-V5 (1)
- Temperature dependence (1)
- Temperature measurement (1)
- Tempered martensite ferritic steels (1)
- Tensile Test Ontology (1)
- Tensile properties (1)
- Tensile testing (1)
- Thermal barrier coating (TBC) (1)
- Thermal shock (1)
- Thermal shock stress (1)
- Thermo-mechanical Fatigue (1)
- Thermography (1)
- Thermomechanical Fatigue (TMF) (1)
- Thermomechanical Fatigue (TMF); High Cycle Fatigue (HCF); Cast iron; Fatigue assessment (1)
- Thermomechanical fatigue (TMF) (1)
- Thermoschock (1)
- Thickening (1)
- Titanaluminide (1)
- Titanium alloys (1)
- Topography (1)
- Transmission electron microscopy (1)
- Transmission electron microscopy (TEM) (1)
- Visual ontology development (1)
- Vocabulary providers (1)
- Warmfeste Stähle (1)
- Weibull statistics (1)
- Young's modulus (1)
- Yttria stabilized zirconia (1)
- microstructural changes (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (27)
- 5.2 Metallische Hochtemperaturwerkstoffe (27)
- 8 Zerstörungsfreie Prüfung (9)
- 9 Komponentensicherheit (8)
- 5.1 Mikrostruktur Design und Degradation (7)
- 5.5 Materialmodellierung (6)
- 8.5 Röntgenbildgebung (6)
- 9.6 Additive Fertigung metallischer Komponenten (4)
- 9.3 Schweißtechnische Fertigungsverfahren (3)
- 9.4 Integrität von Schweißverbindungen (3)
- 8.0 Abteilungsleitung und andere (2)
- 1 Analytische Chemie; Referenzmaterialien (1)
- 1.3 Instrumentelle Analytik (1)
- 4 Material und Umwelt (1)
- 4.2 Material-Mikrobiom Wechselwirkungen (1)
- 5.4 Multimateriale Fertigungsprozesse (1)
- 7 Bauwerkssicherheit (1)
- 7.7 Modellierung und Simulation (1)
- 8.3 Thermografische Verfahren (1)
- 8.4 Akustische und elektromagnetische Verfahren (1)
- S Qualitätsinfrastruktur (1)
- S.0 Abteilungsleitung und andere (1)
- VP Vizepräsident (1)
- VP.1 eScience (1)
MoSi alloys containing up to 1 wt.% Si were fabricated by powder-metallurgical processing and their lattice parameters, elastic constants, densities, grain sizes, strengths, ductilities, and fracture toughness values were measured. The yield strength was insensitive to the grain size, i.e., a HallPetch relationship was not observed. Generally, Si additions caused pronounced solid solution strengthening. However, for small Si concentrations (≤0.1 wt.%) solid solution softening was observed at room temperature and below. With increasing Si concentration, the room temperature ductility and fracture toughness dropped precipitously. This is attributed to the increase in strength and a transition from transgranular to intergranular fracture.
A miniature specimen geometry is presented that allows to extract small samples for tensile creep tests directly from critical components of steam generators in power plants like e.g. superheater tubes. In this way, material can be tested which has been subjected to the full processing chain of the component. The specimens then exhibit all microstructural modifications that are present in the component after the shaping process and heat treatment, and representative mechanical properties are determined. Similarly, specimens can be extracted from pre-corroded test pieces or used components after service to determine the impact of complex aging/loading/oxidation conditions during service on the mechanical properties of the material. The applicability of the miniature specimen test method is demonstrated in a comparative creep study involving standard and miniature specimens of P91 tempered martensite ferritic steel. Test results indicate satisfactory accuracy/repeatability of the method. Comparison with large scale specimen data reveals an influence of specimen size on the obtained creep behavior. These size effects need to be considered for a correct interpretation of results from miniature specimen creep tests.
The uniaxial, torsional and axial-torsional thermomechanical fatigue (TMF) behavior of the near-γ TiAl-alloy TNB-V5 was investigated. TMF tests were performed at 400-800 °C with mechanical strain amplitudes ranging from 0.15% to 0.7%. The tests were conducted thermomechanically in-phase (IP) and out-of-phase (OP).
For the same lifetimes, uniaxial IP tests required the highest strain amplitudes, while OP test conditions were most damaging and needed the lowest strain amplitudes. The Mises equivalent mechanical strain amplitudes of pure torsional tests were found in between uniaxial in-phase and out-of-phase tests for the same lifetimes. The non-proportional multiaxial out-of-phase test showed a lower lifetime at the same equivalent mechanical strain amplitude compared to the other types of tests.
The microstructure has been characterized applying electron microscopy and microstructural parameters such as fraction of twinned grains, grain size, lamellar distance and dislocation density have been quantified.
The fatigue behaviour of cast iron is usually investigated on machined specimens. Components of cast iron, however, have a casting skin; therefore the investigation of the influence of the casting skin on the lifetime is of interest. To study this influence isothermal fatigue tests were carried out on heat-resisting spheroidal graphite cast iron EN GJS SiMo 4.05 in 4–point-bending set-up at 400 °C. Specimens with and without casting skin were investigated comparatively. The number of cycles to failure was significantly lower for specimens with casting skin. Metallographic investigations underline the reduction of lifetime caused by casting skin.
A titanium (Ti-6242) matrix composite reinforced with continuous SiC fibers was studied. The mechanical behavior of the matrix and the composite was characterized by tensile, creep and isothermal fatigue tests at room temperature and up to 550°C. The thermo-mechanical fatigue behavior under in-phase and out-of-phase conditions was investigated for the composite between 100 and 550°C. Fracture surfaces were characterized by confocal light microscopy and by scanning electron microscopy to identify the damage mechanisms.
Der vorliegende Beitrag beschreibt typische Bruchmuster, die an SSiC Proben nach Thermoschockexperimenten beobachtet wurden und korreliert diese qualitativ mit der aufgebrachten Belastung. Der Thermoschock wird durch eine schnelle, in der Probenmitte beginnende spiralförmige Aufheizung dünner Scheiben mit Laserstrahlung realisiert. Durch diese Versuchsführung wandert ein zunehmender Temperaturgradient von der Mitte beginnend in radialer Richtung durch die Probe. Dieser Temperaturgradient ist für die Ausbildung von Druckspannungen im Probeninneren und Zugspannungen im kalten Randbereich der Probe verantwortlich. Beim Erreichen einer kritischen, versagensrelevanten Spannung tritt Probenbruch auf. Dabei wird die bis zu diesem Zeitpunkt in der Probe gespeicherte elastische Energie teilweise in die Schaffung von Rissoberflächen umgewandelt. Der Zusammenhang zwischen gespeicherter elastischer Energie und Bruchmuster wird dargestellt.
Thermal barrier coatings (TBCs) are used to increase the operating temperature of land-, sea-, or air-based turbines. As failure of the coating may result in serious damage of the turbine, reliable estimation of the lifetime is essential. Most experiments to assess the lifetime or to determine parameters for simulations of the behavior of TBCs are done by burner-rig-tests, where the operating conditions are simulated by cyclic heating of the surface and cooling of the backside of a coated sample.
In this work a possibility is presented to do comparable experiments by heating the surface with laser irradiation instead of a burner. For this purpose a Nd:YAG-laser with a maximum output power of 1?kW and a wavelength of 1064?nm is used. The laser spot can be moved by integrated optics across the sample surface to achieve homogeneous heating of the coating. Cooling of the backside is done by air. The temperature of the sample surface is determined by an infrared-camera which also enables the possibility to detect failures in the coating via thermography. Additionally, acoustic sensors attached to the sample holder are used to detect failures in the sample. The investigated ceramic material (yttria stabilized zirconia) has a very low absorption coefficient at the used laser wavelength. Therefore, a pre-treatment of the samples was needed to increase the absorption coefficient to be able to heat up the samples.
In this paper, the experimental setup and first experimental results are presented.
Thermal barrier coatings allow increasing the operating temperature and efficiency of land-, sea-, or air-based turbines. As failure of the coating may result in serious damage of the turbine, reliable estimation of its lifetime is essential. To assess the lifetime, cyclic tests are conceived to combine thermal loading by heating the surface of the coating with laser irradiation and nondestructive methods for damage determination. Using laser irradiation allows a high reproducibility of the thermal load. The temperature of the sample surface during thermal loading is determined by an infrared-camera which also enables the possibility to detect damage in the coating via thermography. Additionally, four acoustic sensors, attached to the experimental setup, are used to detect damage in the sample and determine the source of acoustic events. Results of acoustic emission correlate well with thermographic images that visualize the formation and evolution of damage through delaminations in the samples.
The continuing increase of steam parameters of fossil fuelled high efficiency power plants and new combustion concepts for the capture and storage of carbon dioxide lead to harsher service conditions for the components and structural materials of such facilities. The present work introduces a test concept that allows testing of candidate materials under simultaneous mechanical and corrosive loading. The material's reaction can be directly investigated under simulated temperature, load and corrosion conditions of modern installations. First results obtained for different heat resistant steels suggest a strong influence of the environmental medium on the fatigue and creep behaviour. Such findings complement the data that is available from the classical qualification process of the materials and may support the material selection for new power plant installations.
Experimental and analytical investigation of the TMF-HCF lifetime behavior of two cast iron alloys
(2017)
The combined loading Thermomechanical Fatigue (TMF) with High Cycle Fatigue (HCF) has been experimentally investigated for two cast iron alloys. Both alloys contain globular graphite nodules but the first one has a ferritic structure while the second one has an austenitic crystal structure. In particular, the influences of the HCF frequency, of the HCF loading amplitude and of the location of the superposed HCF cycles have been investigated. It was observed that the HCF frequency has a limited impact on the fatigue life. On the other side, the HCF-strain amplitude has a highly non-linear influence on the fatigue life. The experimental results can be understood in terms of a fracture mechanics based damage mechanism: Cracks quickly initiate due to the TMF loading and the growth of the cracks up to a few mm controls the fatigue life. If HCF-loading cycles are superposed, cyclic crack propagation dramatically accelerates after a threshold has been reached. This threshold is regarded as controlling the fatigue life reduction. The previous ideas have been expressed in a model that can be very simply applied to estimate the fatigue life reduction ratio due to the superposed HCF cycles. It only contains two adjustable parameters and can be combined with any TMF life assessment model.
Modeling the lifetime reduction due to the superposition of TMF and HCF loadings in cast iron alloys
(2016)
The superposition of small amplitude, high frequency loading cycles (HCF) to slow, large amplitude loading cycles (TMF) can significantly reduce the fatigue life. In this work, the combined TMF+HCF loading has been experimentally investigated for a cast iron alloy. In particular, the influence of the HCF frequency of the HCF amplitude and of the location of the superposed HCF cycles has been assessed. It was observed that the HCF frequency has a limited impact on the TMF fatigue life. On the other side, the HCF-strain amplitude has a highly non-linear influence on the TMF fatigue life. A simple estimate for the fatigue life reduction due to the superposed HCF cycles has been derived from fracture mechanics considerations. It is assumed that the number of propagation cycles up to failure can be neglected after a threshold for the HCF loading has been reached. The model contains only two adjustable parameters and can be combined with any TMF life prediction model. The model predictions are compared with the test results for a large range of TMF+HCF loading conditions.
The determination of critical failure parameters during thermal shock requires a time and space resolved temperature measurement of the sample. High frequency pyrometry is a suitable technique for such a measurement task, which usually requires the knowledge of the optical properties of the investigated material. Another challenge is the infrared transparency of materials to be checked in the wavelength range of the pyrometer. The thermal shock disks are very thin, due to the need of homogeneous temperature distribution and to maintain a two-dimensional problem. To allow a pyrometric temperature measurement a universal calibration method for high frequency infrared cameras has been developed. Pyrometry in various media was demanded, as well as the estimation of optical properties (reflection, transmittance and emission) for the selected ceramics to be tested.
The thermal shock behavior of three commercial-advanced ceramics (SSiC, MgO–PSZ, Al2O3) is characterized in air and vacuum applying a laser thermal shock. The available testing system permits the reproducible setting of defined temperature profiles in thin disks and allows a heating-up thermal shock in various media. Due to the accurate determination of the time- and space-resolved temperature distribution, the local stress state can be calculated as a function of time. It is shown that the thermal shock strength is highest for SSiC and lowest in Al2O3 with MgO–PSZ in between. The approach presented in this work allows quantifying the stress state at failure in terms of tangential tensile stress. The investigated environment does not affect the thermal shock resistance under the studied experimental conditions.
TMF tests were carried out on EN-GJSA-XNiSiCr35-5-2 at constant minimum temperature (400 °C) and varying maximum temperatures (Tmax = 700 °C, 800 °C, 900 °C) with hold times of 180 s at Tmax and two phase angles (in-phase (IP), 180° out-of-phase (OP)). The results showed a comparable strength under OP- and IP-TMF loading. At Tmax = 700 °C and 900 °C, the lifetime in IP-tests was slightly longer than that of OP-tests, while it is vice versa at Tmax = 800 °C. The IP-tests at Tmax = 900 °C showed a similar lifetime as OP-tests at Tmax = 700 °C and 800 °C, which was unexpected for such a high testing temperature. All IP-tests at Tmax = 900 °C showed a continuous cyclic softening from the beginning on, which was different from all other testing conditions. Complementary metallographic investigations indicated that under this test condition, intergranular creep damage is present in the volume of the test pieces.
The digitalization of materials science and engineering (MSE) is currently leading to remarkable advancements in materials research, design, and optimization, fueled by computer‐driven simulations, artificial intelligence, and machine learning. While these developments promise to accelerate materials innovation, challenges in quality assurance, data interoperability, and data management have to be addressed. In response, the adoption of semantic web technologies has emerged as a powerful solution in MSE. Ontologies provide structured and machine‐actionable knowledge representations that enable data integration, harmonization, and improved research collaboration. This study focuses on the tensile test ontology (TTO), which semantically represents the mechanical tensile test method and is developed within the project Plattform MaterialDigital (PMD) in connection with the PMD Core Ontology. Based on ISO 6892‐1, the test standard‐compliant TTO offers a structured vocabulary for tensile test data, ensuring data interoperability, transparency, and reproducibility. By categorizing measurement data and metadata, it facilitates comprehensive data analysis, interpretation, and systematic search in databases. The path from developing an ontology in accordance with an associated test standard, converting selected tensile test data into the interoperable resource description framework format, up to connecting the ontology and data is presented. Such a semantic connection using a data mapping procedure leads to an enhanced ability of querying. The TTO provides a valuable resource for materials researchers and engineers, promoting data and metadata standardization and sharing. Its usage ensures the generation of finable, accessible, interoperable, and reusable data while maintaining both human and machine actionability.
Experimental and phase field studies of age hardening response of a high purity Al‐4Cu‐1Li‐0.25Mn‐alloy (mass %) during isothermal aging are conducted. In the experiments, two hardening phases are identified: the tetragonal θ′ (Al₂Cu) phase and the hexagonal T1 (Al₂CuLi) phase. Both are plate shaped and of nm size. They are analyzed with respect to the development of their size, number density and volume fraction during aging by applying different analysis techniques in TEM in combination with quantitative microstructural analysis. 3D phase‐field simulations of formation and growth of θ′ phase are performed in which the full interfacial, chemical and elastic energy contributions are taken into account. 2D simulations of T1 phase are also investigated using multi‐component diffusion without elasticity. This is a first step toward a complex phase‐field study of T1 phase in the ternary alloy. The comparison between experimental and simulated data shows similar trends. The still unsaturated volume fraction indicates that the precipitates are in the growth stage and that the coarsening/ripening stage has not yet been reached.
AbstractHigh-strength aluminum alloys used in aerospace and automotive applications obtain their strength through precipitation hardening. Achieving the desired mechanical properties requires precise control over the nanometer-sized precipitates. However, the microstructure of these alloys changes over time due to aging, leading to a deterioration in strength. Typically, the size, number, and distribution of precipitates for a quantitative assessment of microstructural changes are determined by manual analysis, which is subjective and time-consuming. In our work, we introduce a progressive and automatable approach that enables a more efficient, objective, and reproducible analysis of precipitates. The method involves several sequential steps using an image repository containing dark-field transmission electron microscopy (DF-TEM) images depicting various aging states of an aluminum alloy. During the process, precipitation contours are generated and quantitatively evaluated, and the results are comprehensibly transferred into semantic data structures. The use and deployment of Jupyter Notebooks, along with the beneficial implementation of Semantic Web technologies, significantly enhances the reproducibility and comparability of the findings. This work serves as an exemplar of FAIR image and research data management.
A study was made on the effect of creep loading on the precipitate radii evolution of the aluminum alloy 2618A.
The overageing process of the alloy was investigated under load at a temperature of 190 °C with stresses between 79 and 181 MPa and compared to stress free isothermal ageing. The precipitates responsible for strength were characterized using dark-field transmission electron microscopy (DFTEM). This allows the experimental Determination of radii distributions of the rod-shaped Al2CuMg precipitates and the evaluation regarding their mean precipitate radius. It was found that the mean precipitate radius enables the comparison of the different microstructural conditions of crept and uncrept samples. The mean precipitate radii of the samples experiencing creep are significantly higher than those of undeformed samples. It was shown that the acquired radii distributions are viable to determine averaged particle radii for comparison of the aged samples. A ripening process including pipe diffusion along dislocations describes the data on coarsening very well for the creep samples.
Size effects in miniature specimen creep testing of heat resistant ferritic-martensitic steels
(2015)
The use of miniaturized specimen geometries in mechanical testing allows extracting the sample material directly from the sidewall of critical components of power plants, like e.g. headers and steam pipes. In this way, both the impacts of the processing of the component (including all shaping and tempering influences) and of the exposure to the complex aging/loading/oxidation conditions in the plant (in case of post-Service tests) can be analyzed and representative mechanical properties are obtained.