Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Sammelband (22) (entfernen)
Sprache
- Englisch (22) (entfernen)
Referierte Publikation
- nein (22)
Schlagworte
- Groundwater remediation (5)
- Elemental Iron (4)
- Hydroxyapatite (4)
- Long-term Performance (4)
- Permeable Reactive Barrier (4)
- Bottom ash (2)
- Sewage sludge (2)
- Thermo-chemical treatment (2)
- Ash treatment (1)
- Dry treatment (1)
Organisationseinheit der BAM
The main obstacle to bottom ash (BA) being used as a recycling aggregate is the content of salts and potential toxic elements (PTEs), concentrated in a layer that coats BA particles. This work presents a dry treatment for the removal of salts and PTEs from BA particles. Two pilotscale abrasion units (with/without the removal of the fine particles) were fed with different BA samples. The performance of the abrasion tests was assessed through the analyses of particle size and moisture, and that of the column leaching tests at solid-to-liquid ratios between 0.3 and 4. The results were: the particle-size distribution of the treated materials was homogeneous (25 wt % had dimensions <6.3 mm) and their moisture halved, as well as the electrical conductivity of the leachates. A significant decrease was observed in the leachates of the treated BA for sulphates (44%),
chlorides (26%), and PTEs (53% Cr, 60% Cu and 8% Mo). The statistical analysis revealed good correlations between chloride and sulphate concentrations in the leachates with Ba, Cu, Mo, and Sr, illustrating the consistent behavior of the major and minor components of the layer surrounding BA particles. In conclusion, the tested process could be considered as promising for the improvement of BA valorization.
Bottom ash from municipal solid waste incineration (MSWI) consists of eiemental metals in considerable amounts. The fine fraction < 4 mm additionally contains chemically bound metals (oxides, carbonates, Silicates). Separation prospects with techniques as in ore processing (flotation, density separation, bioleaching, hydrothermal solution) are discussed. During alteration after wet extraction mineral material with hydraulic properties form coatings on almost all particles of the bottom ash and complicate separation procedures. ln addition bottom ash from MSWI is a heterogeneaus material. For sufficient enrichment different concerted treatment steps seemed to be essential associated with an uncertainty of economic viability. The utilisation of metal compounds present in bottom ash as secondary raw material depends on the energy- and resource-efficiency of the enrichment processes. Therefore energy and material flow considerations are presented.
In 2011, the Association of German Engineers (VDI) started working on a set of guidelines
towards increased resource efficiency. These guidelines represent a framework that defines resource efficiency and outlines considerations for the producing industry. A special guideline for SMEs is included as well as guidelines on methodologies for evaluating resource use
indicators, such as the cumulative raw material demand of products and production systems.
Resource efficiency, defined here as the relationship between a specific benefit or use and the natural resources that need to be spent or consumed to attain this benefit or use. It can be
evaluated by defining a function which expresses the specific benefit and quantifies the resource requirements through a set of indicators (use of raw materials, energy, water, land
and ecosystem services including sinks). The results from this also depend on the system boundary parameters and the allocation rules for by-products and waste treatment options. Optimising resource use is possible at all stages of a product’s or production system’s life cycle chain (raw material extraction, production and manufacturing, use and consumption, and the
end-of-life stage).
VDI guidelines are widely accepted across Germany’s industrial sector and therefore represent an important means of mainstreaming resource efficiency in this target area. As well as providing a methodological framework, the guidelines describe strategies and measures towards increasing resource efficiency, and they enable industrial producers and service providers to identify potential areas of improvement. The full article presents an overview of
the methodology and contents of these guidelines and discusses their impact in achieving absolute reductions in the industrial use of natural resources.
Long-term performance of permeable reactive barriers has been investigated in laboratory experiments using elemental iron and hydroxyapatite as reactive materials and uranium as contaminant. Accelerated testing has been performed by applying elevated pollutant concentration and an increased flow velocity. The spatial distribution of uranium in the test columns has been investigated using a radioactive tracer. The results show that the migration pattern exhibits a linear behaviour.
Permeable reactive barriers
(2005)
Behaviour of uranium in elemental iron and hydroxyapatite reactive barriers: column experiments
(2005)
Elemental iron (Fe0) and hydroxyapatite (HAP) were evaluated as reactive materials in PRBs for uranium remediation. Laboratory experiments were carried out and a pilot-scale reactive barrier with Fe0 was installed in Pécs (Southern Hungary). Results of 2.5 years of operation are reported. The PRB has a considerable influence on groundwater composition: uranium concentrations decrease from 900 µg/l to <10 µg/l, TDS drop from 1,000 mg/l to 500 mg/l.