Filtern
Dokumenttyp
- Vortrag (4)
- Zeitschriftenartikel (1)
Sprache
- Englisch (5) (entfernen)
Referierte Publikation
- nein (5)
Schlagworte
- Classification (2)
- Dangerous Goods (2)
- Energetic materials (2)
- Explosive properties (2)
- Applications for Union authorisation of biocidal products (1)
- Biocidal Products Regulation (1)
- Competent Authority (1)
- DSC (1)
- Dangerous goods (1)
- Data requirements (1)
- Data waiving (1)
- ECHA (1)
- Exothermic decomposition energy (1)
- Flammability (1)
- Friction sensitivity (1)
- GHS (1)
- Hazard classification (1)
- Hazardous substances (1)
- Impact sensitivity (1)
- Interlaboratory comparison (1)
- Physical hazard classes (1)
- QSAR Toolbox (1)
- Quality assurance (1)
- Round robin test (1)
- Screening tests (1)
- Test method (1)
- Test methods (1)
- Thermal stability (1)
- UN Test N.1 (1)
- Validation (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (4)
The presentation will give an overview of the testing required for physical hazards under the BPR and CLP Regulations (Regulation (EU) No 528/2012 and Regulation (EC) No 1272/2008), safety characteristics, actual Standards and the UN Manual of Tests and Criteria as well, the importance of quality assurance in testing and data reporting, and the testing and assessment strategies on topics that have been specifically asked by EU Member States.
Differential Scanning Calorimetry (DSC) may be used to avoid testing for explosive and self-reactive properties according to the legal regulations of chemicals substances and dangerous goods.
Demonstrated measured exothermic decomposition energy value significantly affected by numerous factors - choice of sample vessel, sample mass, baseline shape, peak shape, heating rate.
CEQAT-DGHS Interlaboratory Test Programme for Chemical Safety - Need of Test Methods Validation
(2019)
Safety experts, manufacturers, suppliers, importers, employers or consumers must be able to rely on the validity of safety-related test methods and on correct test results and assessments in the laboratory. Via the eChemPortal lots of data from the REACH registration dossiers are available. However, the quality and correctness of the information remains in the responsibility of the data submitter. Unfortunately, we found more or less appropriate information on physicochemical properties and concluded that more quality or adequacy of any data submitted will be needed.
Interlaboratory tests play a decisive role in assessing the reliability of test results. Interlaboratory tests on different test methods have been performed by Bundesanstalt für Materialforschung und –prüfung (BAM) and Physikalisch-Technische Bundesanstalt (PTB) in collaboration with the QuoData GmbH during the last 10 years. Significant differences between the results of the participating laboratories were observed in all interlaboratory tests. The deviations of the test results were not caused only by laboratory faults but also by deficiencies of the test method.
In view of the interlaboratory test results the following conclusions can be drawn:
• To avoid any discrepancy on classification and labelling of chemicals it should become state of the art to use validated test methods and the results accompanied by the measurement uncertainty.
• A need for improvement is demonstrated for all examined test methods. Thus, interlaboratory tests shall initially aim at the development, improvement and validation of the test methods and not on proficiency tests.
• The laboratory management and the practical execution of the tests need to be improved in many laboratories.
• The term "experience of the examiner" must be seen critically: A "long experience with many tests" is not necessarily a guarantee for correct results.