Filtern
Erscheinungsjahr
- 2015 (11) (entfernen)
Dokumenttyp
- Vortrag (9)
- Zeitschriftenartikel (2)
Schlagworte
- Explosion limits (1)
- Explosion protection (1)
- Heavy gas (1)
- Ignition criterion (1)
- Non-atmospheric conditions (1)
- Numerical simulation (1)
- Process safety (1)
- Standardization (1)
Eingeladener Vortrag
- nein (9)
Many industrial processes are run at non-atmospheric conditions (elevated temperatures and pressures, other oxidizers than air). To judge whether and if yes to what extent explosive gas(vapor)/air mixtures will occur or may be generated during malfunction it is necessary to know the safety characteristic data at the respective conditions. Safety characteristic data like Explosion limits, are depending on pressure, temperature and the oxidizer. Most of the determination methods are standardized for ambient conditions.
In order to obtain determination methods for non-atmospheric conditions, particularly for higher initial pressures, reliable ignition criteria were investigated. Ignition tests at the explosion Limits were carried out for mixtures of methane, propane, n-butane, n-hexane, hydrogen, ammonia and acetone in air at initial pressures up to 20 bar. The tests have been evaluated according to different ignition criteria: visual flame propagation, temperature and pressure rising. It could be shown that flame propagation and occasionally self-sustained combustion for several seconds occurred together with remarkable temperature rise, although the pressure rise was below 3%. The results showed that the combination of a pressure rise criterion of 2% and a temperature rise criterion of 100 K seems to be a suitable ignition criterion for the determination of explosion limits and limiting oxidizer concentration at higher initial pressures and elevated temperatures. The tests were carried out within the framework of a R&D project founded by the German Ministry of Economics and Technology.
The hazardous potential of accidental heavy gas releases, especially those involving flammable and toxic gases, is widely known. In order to predict the area in which these gases are in hazardous concentrations, an estimation of the dispersion of these gases must be carried out. While the hazardous area for flammable heavy gases is determined by the lower flammability limit (ca. >1 vol%), the release of toxic heavy gases can result in a much larger hazardous area. Toxic gases, even in very low concentrations (ca. <3,000 ppm), have the potential to be highly damaging. State-of-the-art dispersion models, such as the VDI Guideline 3783, can be used to estimate the dispersion of heavy gases. However, VDI 3783 gives no method for the prediction of the height and width of a heavy gas cloud, which are both required for quantitative risk analysis as well as for a possible coupling of a Lagrangian particle model with the VDI 3783 heavy gas dispersion model. Therefore, further calculation methods were used to describe these dimensions and were evaluated against experimental studies of the length, width, and height of the heavy and neutral gas field. In addition to that the influence of the source height on the heavy gas dispersion was also examined