Filtern
Dokumenttyp
Referierte Publikation
- ja (6) (entfernen)
Schlagworte
- Explosionsschutz (2)
- Sterilisation (2)
- Dry antiseptic (1)
- Energy storage (1)
- Ethylene oxide (1)
- Ethylenoxid (1)
- Exploding wire (1)
- Explosion control (1)
- Explosion limits (1)
- Explosion pressure (1)
Organisationseinheit der BAM
Für die sicherheitstechnische Beurteilung von Sterilisationsprozessen wurden die Explosionsgrenzen von Gasgemischen aus Ethylenoxid, Inertgas und Luft experimentell bestimmt. Die Messungen sind mit Stickstoff, Kohlenstoffdioxid und Wasserdampf bei 20 und 100 °C sowie bei 0,4 und 1,0 bar durchgeführt worden. Mit Hilfe der Daten wurde ein halbempirisches Modell entwickelt, mit dem die Explosionsfähigkeit von Prozessgasgemischen berechnet werden kann.
Es wurde ein Verfahren zur Berechnung von Explosionsgrenzen ethylenoxidhaltiger Gasphasen in Sterilisatoren entwickelt. Mit Hilfe der Software GasEq® und des neu entwickelten Makros SterEx für MS-Excel® lassen sich die Explosionsgrenzen für Gemische aus Ethylenoxid, Luft und Inertgasen bei Temperaturen zwischen 20°C und 100°C sowie 0,4 bar und 1,0 bar berechnen. Somit ist es schnell möglich, sichere Betriebsbedingungen für Sterilisationsprozesse mit Ethylenoxid festzulegen. Das halbempirische Modell basiert auf der Annahme konstanter Flammentemperaturprofile an den Explosionsgrenzen in Abhängigkeit der EO-Konzentration für verschiedene Gemische. Durch systematische Zündversuche wurden Explosionsgrenzen für Gemische aus Ethylenoxid, Stickstoff, Kohlenstoffdioxid, Wasserdampf und Luft zur Bestimmung von Modellparametern und zur Validierung des Verfahrens bestimmt. Um die Prozessbedingungen in Sterilisatoren möglichst genau zu simulieren, wurden die Versuche in einem geschlossenen Autoklav in Anlehnung an DIN EN 1839-B durchgeführt. Berechnungen der Explosionsgrenzen von Prozessgasgemischen mit SterEx ergeben eine gute Übereinstimmung mit experimentell ermittelten Werten.
----------------------------------------------------------------------------------------------------------------------------------
A calculation method for flammability limits of gas phases with ethylene oxide in sterilisers was developed. Using the Software GasEq® and the newly developed Makro SterEx for MS-Excel®, flammability limits of mixtures with ethylene oxide, air and inert gases at temperatures between 20°C and 100°C and pressures between 0.4 bar and 1.0 bar can be calculated. This method can be used to easily determine safe operating conditions. The used semi-empirical model is based upon the assumption of constant flame temperature profiles at the flammability limits subject to the EO-concentration for different mixtures. To collect model parameters and to validate the model, several experiments with mixtures of ethylene oxide, nitrogen, carbon dioxide, water vapour and air were carried out to determine flammability limits. To simulate the structural conditions of sterilisers, the experiments were conducted in accordance to DIN EN 1839-B in a closed autoclave with temperatures and pressures relevant for sterilisation processes. The calculation of flammability limits of process gas mixtures with SterEx provides good agreement with flammability limits that were determined in experiments.
For the determination of safety characteristics of gases, vapors and dusts different types of ignition sources are used in international standards and guidelines. The paper presents test results of a comparative calorimetric and visual study between four different types of ignition sources. The ignition procedures were analyzed visually with a high-speed camera and electric recordings. In addition to that, the influence of the electrode-orientation, -distance as well as ignition energy on the reproducibility of the exploding wire igniter was tested.
The exploding wire is already in use for standardized determination of safety characteristics of gases, first tests on the suitability of the exploding wire igniter for dust testing have been carried out but are not standardized yet. Using the exploding wire, the ignition energy can be varied from 2 J to 10 000 J (2 x 5000 J) and thus it could be used for gases, vapors, dusts and hybrid mixtures. Moreover it can be used at high initial pressures and it is the only ignition source with an easily measurable ignition energy release. Furthermore, it does not introduce another chemical reaction into the system.
Finally, a proposal for a standard ignition source for explosion tests on hybrid mixtures is derived from the test results.
Safety characteristics for explosion protection of natural gas/hydrogen mixtures relevant in connection with the Power2Gas technology were studied in this work. Lower explosion limits (LEL) and upper explosion limits (UEL), limiting oxygen concentrations (LOC), maximum experimental safety gaps (MESG), maximum explosion pressures (pmax) and maximum rates of pressure rise (dp/dt)max were determined experimentally in dependence of the hydrogen fraction. Adding hydrogen did mainly effect the UEL, LOC, MESG and (dp/dt)max. The mixtures become more "critical" concerning the explosion hazards with increasing hydrogen fraction. However, the dependency of the safety characteristics from the hydrogen fraction is mainly not linear. Adding up to 10% hydrogen to natural gas had nearly no effect on the safety characteristics. More significant effects on the safety characteristics were observed at hydrogen fractions of more than 25%. For example the explosion group changes from IIA to IIB. Considering the huge explosion region and very high (dp/dt)max of hydrogen compared to natural gas, even adding 50% hydrogen to natural gas has a rather small effect on these characteristics. Furthermore pmax of hydrogen/natural-gas mixtures can be calculated with good accuracy assuming ideal adiabatic conditions. EL and LOC of natural gas/hydrogen mixtures in ternary systems with inert gas and air were calculated in dependence of the type of inert gas with the so called “model of constant adiabatic flame temperature profiles”.
In Gasphasen aus Ethylenoxid (EO) und Propylenoxid (PO), die bei technischen Alkoxylierungsreaktionen vorkommen, können auch ohne den Zutritt von Luft Zerfallsreaktionen stattfinden, die explosionsartig mit einer vielfachen Temperatur- und Drucksteigerung verlaufen. Zur Abschätzung der Auswirkungen solcher Explosionen wurden die Explosionsdrücke und die zeitlichen Druckanstiege von reinem EO und EO/PO-Gemischen bei Temperaturen von 100°C bis 200°C und Drücken von 1 - 10 bar in einem 3-dm³-Behälter und punktuell in einem 100-dm³-Behälter experimentell bestimmt.
For evaluation of explosion scenarios in closed systems involving the mildly flammable refrigerants R1234yf, R1234ze and R32 dependent on the ignition energy, ignitions were carried out in a closed autoclave. A newly developed ignition system was used, which allows generating electric arcs with defined energies in a range between 3 J and 1000 J. The lower explosion limit of R32 decreases with increasing ignition energy. R32-explosions can be more severe than explosions involving highly flammable substances.
However, in case of R1234yf and R1234ze, the ignition energy had to be increased to more than 100 J and more than 500 J to detect explosions in the closed system at all, although flame Propagation phenomena can already be observed if these substances are ignited with much weaker ignition sources in open glass tubes. The explosions were very mild with these substances.