Filtern
Erscheinungsjahr
- 2017 (9) (entfernen)
Dokumenttyp
- Vortrag (4)
- Posterpräsentation (3)
- Zeitschriftenartikel (2)
Schlagworte
- Explosionsschutz (5)
- Sicherheitstechnische Kenngrößen (4)
- Explosionsgrenzen (3)
- Biogas (2)
- Gefährdungsbeurteilung (2)
- Klassifizierung (2)
- Normspaltweite (2)
- Berechnungsverfahren (1)
- Biogas-Wasserstoff-Gemische (1)
- CLP-Verordnung (1)
Eingeladener Vortrag
- nein (4)
Bei neueren Verfahren zur Biogasgewinnung wird zusätzlich Wasserstoff in den Fermenter eingespeist, um den Methananteil im Biogas zu erhöhen. Dieses Verfahren bewirkt neben der CO2-Vermeidung eine Erhöhung des Brennwerts und der Qualität des Biogases. Zudem kann dafür, ähnlich wie bei der Einspeisung von Wasserstoff in das Erdgasnetz, Elektrolysewasserstoff aus Überschüssen von Wind- und Solarstrom verwendet werden (Power-to-Gas). Im Poster werden die sicherheitstechnischen Kenngrößen für den Explosionsschutz bei Prozessgasen dargestellt und diskutiert.
Im Poster werden die wichtigsten sicherheitstechnischen Kenngrößen von Gasen für den Explosionsschutz dargestellt. Es wird gezeigt, wie mit Hilfe von Dreistoff-Diagrammen (Explosionsdiagrammen) die Explosionsgrenzen, die Entzündbarkeit und die Sauerstoffgrenzkonzentration von Gemischen aus Brenn- und Inertgasen bestimmt werden. Weiterhin wird eine Zuordnung der Kenngrößen zu den gebräuchlichen Schutzmaßnahmen vorgenommen.
Der Beitrag behandelt die sicherheitstechnischen Kenngrößen (STK) für Gase und Gasgemische. Es wird gezeigt, wie STK für den Explosionsschutz experimentell ermittelt und bewertet werden. Insbesondere wird auf die Abhängigkeiten der STK von Druck, Temperatur und Art des Inertgases eingegangen. Anhand von sogenannten Explosionsdiagrammen werden Gasgemische bewertet und Berechnungsverfahren für Explosionsgrenzen, Entzündbarkeit und Oxidationspotential vorgestellt.
Der Beitrag gibt eine Einführung in den Explossionsschutz. Neben den Schnittstellen zu benachbarten Gebieten wie Anlagensicherheit und Arbeitsschutz werden die Arten möglicher Explosionen in der Prozessindustrie und die Prinzipien des Explosionsschutzes erläutert. Einige Störfälle der letzten Jahre werden diskutiert.
One of the fundamental principles of the UN-GHS (Globally Harmonized System of Classification and Labelling of Chemicals) is that all hazards of a chemical should be assigned and communicated. There is no general prioritization of hazards in the sense that certain hazard classes are not applicable if another one has been assigned. In contrast to health and environmental hazards, there are physical or chemical factors which preclude certain combinations of physical hazard classes. So far, there is no common understanding as to which combinations are relevant and which not. For example, should a pyrophoric liquid be classified as flammable liquid in addition, or is this redundant and unnecessary? In the course of the implementation of the GHS by countries or sectors and the actual application by industry all over the world, such questions become more and more important.
This publication systematically discusses all combinations of the UN-GHS physical hazard classes and assesses them with regard to the relevance of possible simultaneous assignment to a chemical. For many of the combinations an unambiguous decision based on theGHS alone is not possible, thus confirming that the question which physical hazard classes might be assigned simultaneously to a chemical is not trivial. As one more milestone on the path to a globally harmonized system for the classification of hazardous chemicals, this should be discussed and ultimately solved on a global basis. It is the hope that this publication might serve as an impetus for such discussions.
In der Präsentation werden die aktuellen Änderungen im Globally Harmonized System (GHS) zur Klassifizierung der Gase bezüglich ihrer physikalisch-chemischen Gefahren gezeigt. Die Anbindung an europäisches und nationales Recht wird erläutert. Bei den Gasen und Gasgemischen wird insbesondere auf die neuen Klassifizierungsverfahren für pyrophore Eigenschaften und auf die neue Unterteilung der entzündbaren Gase eingegangen.
The presentation will discuss the difference between EU and US standards for the determination of explosion (flammability) limits and limiting oxygen concentration. Small differences observed in measured values can be traced back to the different test apparatuses and criteria. The discrepancies can be much greater in the case of limiting oxygen concentration because of the high amount of inert gases and the corresponding low laminar burning velocities. The paper describes some examples and the influence of the chosen criteria on the results. The European and US standards use the criteria of flame propagation in open test vessels and of pressure rise in closed ones. The examples discussed show that flame propagation is still possible at very small pressure rise values, as observed much below the pressure rise criterion of usual standards. However, flame propagation in a process plant can cause an accident or explosion and must be avoided. Therefore, the flame propagation criterion is recommended to be used in chemical safety engineering. The European safety database CHEMSAFE contains expertevaluated safety data for cases where the determination method and criteria are known. Flammability characteristics based on the pressure rise criterion may suffice in certain cases, e.g. for explosion protection in closed vessels without any connecting pipes.
Im Vortrag wird die Klassifizierung von Gasen und Gasgemischen nach CLP-Verordnung bei Anwendung der neuen Fassung der ISO/DIS 10156:2016 gezeigt. Dabei werden sowohl experimentelle Bestimmungsverfahren als auch Berechnungsverfahren für die Entzündbarkeit von Gasgemischen erläutert. Die physikalisch-chemischen Grundlagen der Berechnungsverfahren werden diskutiert.