Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (90)
- Zeitschriftenartikel (73)
- Vortrag (60)
- Buchkapitel (5)
- Beitrag zu einem Sammelband (4)
- Posterpräsentation (4)
- Dissertation (1)
- Sonstiges (1)
- Forschungsbericht (1)
Sprache
- Englisch (151)
- Deutsch (78)
- Mehrsprachig (10)
Schlagworte
- Rheology (55)
- Cement (49)
- Concrete (30)
- Africa (16)
- Rheologie (14)
- Superplasticizer (14)
- Polysaccharides (13)
- Self-compacting concrete (13)
- Admixtures (12)
- Polycarboxylate ether (11)
- Sustainability (10)
- Superplasticizers (9)
- Cement hydration (8)
- Fließmittel (7)
- Hydration (7)
- Proficiency testing (7)
- Selbstverdichtender Beton (6)
- Setting (6)
- Starch (6)
- Adsorption (5)
- Diutan gum (5)
- Metakaolin (5)
- Mixture composition (5)
- Polycarboxylate (5)
- Polycarboxylatether (5)
- Robustness (5)
- Yield stress (5)
- Rice husk ash (4)
- Round robin (4)
- Stabilising agent (4)
- Structural build-up (4)
- Supplementary cementitious materials (4)
- Temperature (4)
- Thixotropy (4)
- Baustoffe (3)
- Bio-based materials (3)
- Cassava (3)
- Control charts (3)
- Cusum (3)
- DFG SPP 2005 (3)
- Dye (3)
- Education (3)
- Polysaccharide (3)
- Quality control (3)
- SCC (3)
- Shrinkage (3)
- Starch ether (3)
- Urban heat island effect (3)
- Viscosity (3)
- Viscosity modifying agent (3)
- Welan gum (3)
- Workability (3)
- Zusatzmittel (3)
- Admixture (2)
- Analytics (2)
- Basic oxygen furnace slag (2)
- Beton (2)
- Bio-based concrete (2)
- Biopolymers (2)
- Box-Behnken (2)
- C3A (2)
- Carbon emissions (2)
- Cement paste (2)
- Characterization (2)
- Chemical admixtures (2)
- Chloride migration (2)
- Civil Engineering (2)
- Climatic conditions (2)
- Compressive strength (2)
- Corrosion potential (2)
- Depletion force (2)
- Early hydration (2)
- Electrical resistivity (2)
- Engineered recycled mineral admixtures (2)
- Environment (2)
- Erstarren (2)
- Fluorescence (2)
- Fly ash (2)
- Freeze-thaw (2)
- Frischbetoneigenschaften (2)
- Grout (2)
- Grouting (2)
- Heat evolution (2)
- Heat of hydration (2)
- Limestone filler (2)
- Materials (2)
- Mix design (2)
- Modified starch (2)
- Packing density (2)
- Penetration test (2)
- Plastic viscosity (2)
- Polycarboxylate ether (PCE) (2)
- Porous medium (2)
- Portland cement (2)
- Quality infrastructure (2)
- Reinforcement (2)
- Rheological (2)
- Rheological properties (2)
- Robustheit (2)
- Round Robin (2)
- SHCC (2)
- SVB (2)
- Schallemission (2)
- Schwinden (2)
- Silica beads (2)
- Slump flow (2)
- Stabilisierer (2)
- Stabilising agents (2)
- Standards (2)
- Sub-Saharan Africa (2)
- Temperatur (2)
- Triumfetta Pendrata A. Rich (2)
- Urban heat island (2)
- Viscosity modifying agents (2)
- Water absorption (2)
- 1H NMR relaxometry (1)
- 3D concrete printing (1)
- AFM (1)
- AOQL (1)
- Accelerator (1)
- Acoustic emission (1)
- Additions (1)
- Additive manufacturing (1)
- Ageing (1)
- Agglomeration (1)
- Aggregates (1)
- Agricultural by-product (1)
- Akaziengummi (1)
- Alkali-activated binders (1)
- Allgemeines (1)
- Alterung (1)
- Ambient conditions (1)
- Analysis of variance (1)
- Aqueous phase of cement paste (1)
- Ash (1)
- Atmospheric humidity (1)
- Autogenous deformation (1)
- Bauausführung (1)
- Bauchemie (1)
- Baustellenanwendung (1)
- Betonpflasterstein (1)
- Betonpflastersteine (1)
- Betonstahl (1)
- Betontechnologie (1)
- Bias (1)
- Biomass (1)
- Building with earth (1)
- C3A hydration (1)
- CFD (1)
- CFD simulation (1)
- CO2 reduction (1)
- CUSUM (1)
- Calcined clay (1)
- Calorimetry (1)
- Capillary suction (1)
- Carbon dioxide (1)
- Carbon dioxide emissions (1)
- Carbon emission (1)
- Carbon footprint (1)
- Casting (1)
- Casting environment (1)
- Cement production (1)
- Cement technologies (1)
- Cement testing (1)
- Cement, hydration (1)
- Cementitious materials (1)
- Charge density (1)
- Circular economy (1)
- Clean and safe cement production (1)
- Climate (1)
- Clinker reduction (1)
- Coarsely dispersed systems (1)
- Compatibility (1)
- Compressed earth (1)
- Concrete multilayer pavers (1)
- Concrete multilayers pavers (1)
- Concrete paving stone (1)
- Concrete technologies (1)
- Conformity (1)
- Construction (1)
- Control Chart (1)
- Crack Detection (B) (1)
- Creep (1)
- Cusum method (1)
- Decarbonisation (1)
- Decision matrix analysis (1)
- Delayed addition (1)
- Demolition wastes (1)
- Depassivation (1)
- Durability (1)
- Dyes (1)
- EN 12350-11 (1)
- EN 196 (1)
- EN 206 (1)
- EN 206:2014 (1)
- Early cement hydration (1)
- Earth-moist concrete (1)
- Energy sustainability (1)
- Environmental conditions (1)
- Ettringite (1)
- Faserverstärkter Beton (1)
- Fib model code (1)
- Fibers (1)
- Fibre Reinforcement (E) (1)
- Fibre concrete (1)
- Fibres (1)
- Fire exposure (1)
- Fire spalling (1)
- Fließgrenze (1)
- Fließmittel Betontechnologie (1)
- Flow Coefficient (1)
- Flowable concrete (1)
- Free polymer (1)
- Fresh concrete (1)
- Frischbeton (1)
- Frost salt attack (1)
- Frühe Zementhydratation (1)
- Future‑oriented standards (1)
- Gesteinskörnung (1)
- Global engineering (1)
- Green urban construction (1)
- Guar Gum (1)
- Guar gum (1)
- HRWRA (1)
- Heat flow calorimetry (1)
- High strength concrete (1)
- High temperature behaviour (1)
- High-performance concrete (1)
- Hitzeinsel (1)
- Hochduktiler Beton (1)
- Hochfester Beton (1)
- Hochleistungsbeton (1)
- Hydratationswärme (1)
- Hydration kinetics (1)
- Impacts (1)
- Influence of temperature (1)
- Interfacial forces (1)
- Interlaboratory test (1)
- Ionic stregth (1)
- Ions (1)
- Iron ore tailings (1)
- KUSUM (1)
- Kalksteinmehl (1)
- Konformität (1)
- Kontrollkarten (1)
- Lignosulfonate (1)
- Limestone (1)
- Limestone Filler (1)
- Limestone powder (1)
- Lochkorrosion (1)
- Long-term shrinkage (1)
- Low-carbon construction (1)
- Low-cement concrete (1)
- Material characterization (1)
- Mean value criterion (1)
- Meta materials (1)
- Method development (1)
- Micro silica (1)
- Microcracking (B) (1)
- Microfiller (1)
- Microfine Cement (1)
- Microsilica (1)
- Mikrofiller (1)
- Mining tailing (1)
- Mining tailings (1)
- Mischungsentwurf (1)
- Model calibration (1)
- Moisture transport (1)
- Mortar (1)
- Mukuru (1)
- NMR imaging (1)
- Nachweis der Wirksamkeit (1)
- Nano engineered materials (1)
- Nano engineering (1)
- Nano scale (1)
- Nanopulver (1)
- Nkui (1)
- No slump concrete (1)
- Numerical modelling (1)
- On-Site Application III (1)
- One-part geopolymers (1)
- Online quality control (1)
- Optical Spectroscopy (1)
- Optical spectroscopie (1)
- PACE-PTS (1)
- PCE (1)
- PCE-Based superplasticizer (1)
- PVA-Fasern (1)
- Packungsdichte (1)
- Particle Size Distribution (1)
- Partikelgröße (1)
- Pavement (1)
- Peat (1)
- Performance tests (1)
- Permeability (1)
- Photogrammetry (1)
- Photoluminescence (1)
- Polycarboxylate ether vicat (1)
- Polycarboxylate superplasticizer (1)
- Polycarboxylate superplasticizers (PCE) (1)
- Polymer adsorption (1)
- Polymers (1)
- Polyphosphate (1)
- Pore solution (1)
- Pore solutions (1)
- Portland cement Initial hydration (1)
- Potassium ions (1)
- Potato starch (1)
- Praxis (1)
- Pre-hydration (1)
- Proficiency Testing (1)
- Prüfverfahren (1)
- Quality Infrastructure (1)
- Qualitätssicherung (1)
- Quartzite mining tailing (1)
- Rammed earth (1)
- Recycled materials (1)
- Recycled mineral admixture (1)
- Reference Material (1)
- Reflection spectroscopy (1)
- Relaxation time distribution (1)
- Repair (1)
- Research (1)
- Research policy (1)
- Research sub-Sahara (1)
- Resource (1)
- Resting time (1)
- Rheometry (1)
- SHCC corrosion crack (1)
- SPIN (1)
- Science (1)
- Sciences (1)
- Scientific network (1)
- Sedimentation (1)
- Selbstkühlend (1)
- Self-Compacting Concrete (1)
- Self-consolidating concrete (1)
- Self-cooling (1)
- Self-cooling pavement (1)
- Sensitivity (1)
- Shewhart (1)
- Shrinkage Reducing Admixture (1)
- Siebtest (1)
- Simulation (1)
- Slag (1)
- Solid volume fraction (1)
- South Africa (1)
- Spalling (1)
- Sphingan (1)
- Stability (1)
- Stabilizer (1)
- Starches (1)
- Steel slag (1)
- Storage (1)
- Strength (1)
- Sulfate resistant cement (SRC) (1)
- Sulfationengehalt (1)
- Sulphate ion content (1)
- Superplasticiser (1)
- Superplaticizer (1)
- Supplementary Cementitious Materials (1)
- Supplementary cementitious material (1)
- Supplementary cementitous materials (1)
- Suspension (1)
- Sustainable cement (1)
- Sustainable construction (1)
- Sustainable development (1)
- Synchrotron (1)
- Syngenite (1)
- Technology transfer (1)
- Temperatureffekte (1)
- Tensile Properties (C) (1)
- Test setup (1)
- Testing procedure (1)
- Texture analyzer (1)
- Ultrasound gel (1)
- Upscaling (1)
- Urban planning (1)
- Urbanisation (1)
- Verarbeitungseigenschaften (1)
- Versuche (1)
- Vicat (1)
- Viskosität (1)
- Volume Fraction (1)
- Volume fraction (1)
- Waste management (1)
- Waste paper sludge (1)
- Water storage (1)
- Working mechanism (1)
- XRD (1)
- Zement (1)
- Zementleim (1)
- Zeta potential (1)
- Zugversuch (1)
- control chart (1)
- cusum (1)
- quality control (1)
- robustness (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (55)
- 7.4 Baustofftechnologie (52)
- 6 Materialchemie (6)
- 6.6 Physik und chemische Analytik der Polymere (6)
- 1 Analytische Chemie; Referenzmaterialien (4)
- 1.2 Biophotonik (4)
- 7.2 Ingenieurbau (4)
- 7.0 Abteilungsleitung und andere (3)
- 8 Zerstörungsfreie Prüfung (3)
- 8.0 Abteilungsleitung und andere (3)
Eingeladener Vortrag
- nein (60)
Polysaccharides are incorporated into cement based Systems in order to modify the rheological properties. Typically, cellulose ethers, sphingan gums, guar gum or starch ethers are applied. Depending upon their chemistry, molecular architecture, and adsorption tendency, polysaccharides interact differently with the entire cementitious system. Some stabilising agents like diutan gum mainly affect the cementitious paste; other stabilising agents like starch tend to interact with the sand fraction and even with the coarse aggregates. Cellulose and guar gum shows more diverse performances.
Typically stabilising admixtures like polysaccharides are used, when sophisticated rheological properties are adjusted. Therefore, polysaccharides are often used in combination with superplasticisers, which are added to reduce the yield stress of concrete. This can cause interactions, particularly when the stabilising Agent shows a strong tendency to adsorb on particle surfaces. Adsorptive stabilising agents may reduce the amount of adsorbed superplasticisers, thus affecting both viscosity and yield stress, while non-adsorptive stabilising agents mainly affect the plastic viscosity independently of the superplasticiser. Due to the strong influence of superplasticisers on the yield stress, influences of the stabilising agent on the yield stress retreat into the background, so that their major effect is an increase of the plastic viscosity.
The paper provides a comprehensive overview of how different polysaccharide superplasticisers affect cementitious flowable systems and points out the challenges of the combined use of polysaccharides and superplasticisers. Based on rheometric experiments and observations of the hydration process, time dependent effects on the workability as well as of the hydration of cement are presented and discussed.
Organic/inorganic mixtures were prepared from ordinary Portland cement (OPC), water (w/c 0.22), a fluorescent dye in aqueous solution (stable at alkaline pH; BAM-I), and two different comb shape polycarboxylates (PCEs), i.e., high charge (PCE-HC) and low charge (PCE-LC), respectively. Rheological and calorimetric measurements were performed prior to optical studies in order to select PCE concentrations. Absorption and fluorescence spectroscopy of the system OPC + BAM-I (CBAM-I) revealed maxima of dye BAM-I located at 645 nm and 663 nm, respectively. In presence of PCE-HC and PCE-LC, these mixtures displayed a small red shift in reflectance and a faster decrease in intensity compared to studies with CBAM-I; however, only slight differences were observed between the different PCEs. With time, all systems exhibited a decrease in intensity of BAM-I in absorption/reflectance and emission. This could be caused by dye adsorption and possibly decomposition when in contact with cement particles or hydration products.
Structural design and application have always been linked to the compressive strength of concrete as the main relevant criterion. This was justifiable in the past, where concrete consisted of water, ordinary Portland cement and aggregates, but this concept is no longer relevant for modern and more sustainable cement and concrete.
Despite these new developments, existing standards, guidelines and academic curricula have not been much updated and are still used worldwide. There is a need to change this situation by proper education of the users.
This overview describes the challenges that arise at a user Level from the higher complexity of modern concrete, and defines needs and requirements for enhanced applicability of sustainable concrete concepts.
Furthermore, recommendations are given on how better concrete practice can be communicated to all the involved parties, from civil and design engineers to constructors and site-appliers on the construction site.
While today, engineers can choose from a wide range of rheology modifying admixtures, in some parts of the world, these are difficult to access, due to their complex processing. However, alternatives can be bio‐based polymers such as polysaccharides from various sources. These are easily accessible all over the world, do not demand for complicated processing, and typically they are more sustainable than many established materials, which are crude oil‐based.
The paper presents the effects of acacia gum, cassava starch and the gum of triumfetta pendrata A. Rich on the rheological performance of cementitious systems. It is shown that acacia gum can be as efficient as polycarboxylate based superplasticisers, cassava starch can reduce the yield stress slightly with little effect on the plastic viscosity, and the gum of triumfet ta pendrata A. Rich increases the thixotropy of cement pastes with plasticizing polymers significantly.
While today, engineers can choose from a wide range of rheology modifying admixtures, in some parts of the world, these are difficult to access, due to their complex processing. However, alternatives can be bio-based polymers such as polysaccharides from various sources. These are easily accessible all over the world, do not demand for complicated processing, and typically they are more sustainable than many established materials, which are crude oil-based.
The paper presents the effects of acacia gum, cassava starch and the gum of triumfetta pendrata A. Rich on the rheological performance of cementitious systems. It is shown that acacia gum can be as efficient as polycarboxylate based superplasticisers, cassava starch can reduce the yield stress slightly with little effect on the plastic viscosity, and the gum of triumfetta pendrata A. Rich increases the thixotropy of cement pastes with plasticizing polymers significantly.
Superplasticizer and Shrinkage Reducing Admixture Dosages for Microfine Cement in Grout Systems
(2019)
Grouts have numerous applications including crack repair as maintenance in construction industries. Microfine cements are intensively used for high strength mortar and grout products. They are ideal for injection grouting in structural repair. Such grouts should have suitable rheological properties to be injectable, especially those used in repair and rehabilitation. The use of superplasticizers (SP) in these products is thus becoming increasingly crucial to achieve favorable workability and viscosity properties. A difficulty in such grouts is the plastic shrinkage due to finer particles used. It is thus necessary to determine optimum SP and shrinkage reducing admixture (SRA) dosages for a microfine cement based grout. In this study, a saturation dosage was decided from two Polycarboxylate ether (PCE) based SPs in relation to neat cement using slump flow and rheological parameters. A range of grout mixtures was formulated containing micro silica (MS) and fly ash (FA), and tested for suitable rheological and mechanical parameters. Based on the results, a grout mixture with MS and FA was selected to determine optimum SRA content. According to the results, a SP dosage of 3% by weight of neat cement is sufficient to achieve saturation. The grout material including MS and FA can produce comparable properties to neat cement grout. MS is found to improve compressive strength within the range considered, whereas a higher FA content provides favourable rheological properties. Finally, a SRA dosage of 4%, which could reduce the shrinkage by about 43% after 28d days, is determined for the grout system.
A thorough characterization of base materials is the prereq- uisite for further research. In this paper, the characterization data of the reference materials (CEM I 42.5 R, limestone pow- der, calcined clay and a mixture of these three components) used in the second funding phase of the priority program 2005 of the German Research Foundation (DFG SPP 2005) are presented under the aspects of chemical and min- eralogical composition as well as physical and chemical properties. The data were collected based on tests performed by up to eleven research groups involved in this cooperative program.
Supplementary cementitious materials (SCM) can reduce the total amount of Portland cement clinker in concrete production. Rice husk ashes (RHA) can be converted from an agricultural by-product to a high-performance concrete constituent due to a high amount of reactive silica with pozzolanic properties if they are burnt under controlled conditions. The way and duration of combustion, the cooling process as well as the temperature have an effect on the silica form and thus, the chemical and physical performance of the RHA. Various studies on the best combustion technique have been published to investigate the ideal combustion techniques. Yet, the process mostly took place under laboratory conditions. Investigating the difference between the performance of RHA produced in a rural environment and laboratory conditions is useful for the assessment and future enhancement of RHA production, and its application both as building material, for example in rural areas where it is sourced in large quantities, and as additive for high performance concrete. Thus, the paper presents a comparison between RHA produced under rudimentary conditions in a self-made furnace in the rural Bagamoyo, Tanzania and under controlled laboratory conditions at the Technical University of Munich, Germany, with different combustion methods and temperatures. In a second step, RHA was ground to reach particle size distributions comparable to cement. In a third step, cement pastes were prepared with 10%, 20% and 40% of cement replacement, and compared to the performance of plain and fly ash blended cement pastes. The results show that controlled burning conditions around 650 °C lead to high reactivity of silica and, therefore, to good performance as SCM. However, also the RHA burnt under less controlled conditions in the field provided reasonably good properties, if the process took place with proper burning parameters and adequate grinding. The knowledge can be implemented in the field to improve the final RHA performance as SCM in concrete.
Two types of cements were selected as the reference cement in the priority program 2005 of the German Research Foundation (DFG SPP 2005). A thorough characterization of CEM I 42.5 R has been made in a recent publication. In this paper, the characterization data of the other reference cement CEM III/A 42.5 N are presented from the aspects of chemical and mineralogical compositions as well as physical and chemical properties. The characterization data of the slag, which is the second main constituent of this specific cement besides the clinker, are presented independently. For all data received, the mean values and the corresponding errors were calculated. The data shall be used for the ongoing research within the priority program. Also, researchers from outside this priority program can benefit from these data if the same materials are used.
Admixtures are important constituents to enhance the performance of concrete. They allow for more efficient use of binders which can mitigate negative environmental impacts from producing cement-based materials. Commonly used rheology modifying agents like polycarboxylate ethers or cellulose ethers are synthetic or semi-synthetic, respectively. This requires additional energy consumption for their production and global supply chains particularly for many developing regions, which will be large consumers of concrete in the future. However, many locally available bio-based polysaccharides could be effectively used instead. These polymers are often overlooked by engineers and scientists due to their limited distribution and inherent complexity, yet they represent an underleveraged source of precursors for admixtures. This study investigates the action mechanisms of some bio-based rheology modifying agents, i.e., acacia gum and miscanthus gum, and provides a comparison to a conventionally modified starch. The results show that the mechanism of action of these polymers is closely related to the composition of the mixture, mixing regime, and the composition of the aqueous phase. Depending on the agent, either plasticizing or stabilizing effects on rheology can be revealed.