Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (73) (entfernen)
Sprache
- Englisch (49)
- Deutsch (14)
- Mehrsprachig (10)
Schlagworte
- Rheology (20)
- Cement (17)
- Concrete (9)
- Rheologie (8)
- Africa (6)
- Superplasticizers (5)
- Hydration (4)
- Polysaccharides (4)
- Proficiency testing (4)
- Round robin (4)
- Selbstverdichtender Beton (4)
- Self-compacting concrete (4)
- DFG SPP 2005 (3)
- Metakaolin (3)
- Polycarboxylate ether (3)
- Rice husk ash (3)
- Yield stress (3)
- Admixtures (2)
- Adsorption (2)
- Basic oxygen furnace slag (2)
- Baustoffe (2)
- Cement hydration (2)
- Characterization (2)
- Depletion force (2)
- Diutan gum (2)
- Engineered recycled mineral admixtures (2)
- Fließmittel (2)
- Fly ash (2)
- Frischbetoneigenschaften (2)
- Portland cement (2)
- Quality control (2)
- Robustheit (2)
- Robustness (2)
- SCC (2)
- SVB (2)
- Stabilising agent (2)
- Starch ether (2)
- Superplasticizer (2)
- Supplementary cementitious materials (2)
- Temperatur (2)
- Temperature (2)
- Urban heat island (2)
- Viscosity (2)
- Viscosity modifying agents (2)
- Workability (2)
- Zusatzmittel (2)
- AOQL (1)
- Acoustic emission (1)
- Admixture (1)
- Ageing (1)
- Agglomeration (1)
- Aggregates (1)
- Agricultural by-product (1)
- Allgemeines (1)
- Alterung (1)
- Bauausführung (1)
- Baustellenanwendung (1)
- Beton (1)
- Betonpflasterstein (1)
- Betonpflastersteine (1)
- Betontechnologie (1)
- Bio-based concrete (1)
- Biopolymers (1)
- Box-Behnken (1)
- Building with earth (1)
- C3A (1)
- CFD simulation (1)
- CO2 reduction (1)
- CUSUM (1)
- Calcined clay (1)
- Carbon dioxide emissions (1)
- Carbon footprint (1)
- Casting (1)
- Cement paste (1)
- Cement testing (1)
- Cementitious materials (1)
- Charge density (1)
- Chemical admixtures (1)
- Circular economy (1)
- Climate (1)
- Coarsely dispersed systems (1)
- Compatibility (1)
- Compressed earth (1)
- Compressive strength (1)
- Concrete paving stone (1)
- Conformity (1)
- Control charts (1)
- Crack Detection (B) (1)
- Cusum method (1)
- Decarbonisation (1)
- Decision matrix analysis (1)
- Demolition wastes (1)
- Dye (1)
- EN 12350-11 (1)
- EN 206 (1)
- EN 206:2014 (1)
- Early cement hydration (1)
- Education (1)
- Environment (1)
- Fibers (1)
- Fibre Reinforcement (E) (1)
- Fire spalling (1)
- Fließgrenze (1)
- Fließmittel Betontechnologie (1)
- Fluorescence (1)
- Free polymer (1)
- Frost salt attack (1)
- Frühe Zementhydratation (1)
- Future‑oriented standards (1)
- Gesteinskörnung (1)
- Green urban construction (1)
- Grout (1)
- Grouting (1)
- HRWRA (1)
- Hitzeinsel (1)
- Hochfester Beton (1)
- Hochleistungsbeton (1)
- Hydration kinetics (1)
- Impacts (1)
- Interlaboratory test (1)
- Ionic stregth (1)
- Iron ore tailings (1)
- KUSUM (1)
- Kalksteinmehl (1)
- Konformität (1)
- Kontrollkarten (1)
- Limestone (1)
- Limestone filler (1)
- Limestone powder (1)
- Long-term shrinkage (1)
- Low-carbon construction (1)
- Low-cement concrete (1)
- Mean value criterion (1)
- Method development (1)
- Micro silica (1)
- Microcracking (B) (1)
- Microfiller (1)
- Microsilica (1)
- Mikrofiller (1)
- Mining tailing (1)
- Mining tailings (1)
- Mischungsentwurf (1)
- Mix design (1)
- Mixture composition (1)
- Moisture transport (1)
- Nachweis der Wirksamkeit (1)
- Nanopulver (1)
- No slump concrete (1)
- On-Site Application III (1)
- PCE (1)
- PCE-Based superplasticizer (1)
- Packing density (1)
- Packungsdichte (1)
- Partikelgröße (1)
- Pavement (1)
- Penetration test (1)
- Performance tests (1)
- Photoluminescence (1)
- Plastic viscosity (1)
- Polycarboxylate (1)
- Polycarboxylate ether vicat (1)
- Polycarboxylate superplasticizers (PCE) (1)
- Polycarboxylatether (1)
- Polymers (1)
- Pore solution (1)
- Porous medium (1)
- Portland cement Initial hydration (1)
- Potassium ions (1)
- Praxis (1)
- Prüfverfahren (1)
- Qualitätssicherung (1)
- Quartzite mining tailing (1)
- Rammed earth (1)
- Recycled materials (1)
- Recycled mineral admixture (1)
- Reflection spectroscopy (1)
- Reinforcement (1)
- Research policy (1)
- Resource (1)
- Resting time (1)
- Rheological (1)
- Rheological properties (1)
- Rheometry (1)
- SPIN (1)
- Schwinden (1)
- Sedimentation (1)
- Selbstkühlend (1)
- Self-Compacting Concrete (1)
- Self-consolidating concrete (1)
- Self-cooling (1)
- Sensitivity (1)
- Setting (1)
- Shewhart (1)
- Shrinkage (1)
- Siebtest (1)
- Slag (1)
- Slump flow (1)
- Sphingan (1)
- Stabilising agents (1)
- Stability (1)
- Stabilizer (1)
- Starch (1)
- Steel slag (1)
- Strength (1)
- Structural build-up (1)
- Sulfate resistant cement (SRC) (1)
- Sulfationengehalt (1)
- Sulphate ion content (1)
- Supplementary cementitious material (1)
- Supplementary cementitous materials (1)
- Suspension (1)
- Sustainability (1)
- Sustainable cement (1)
- Sustainable construction (1)
- Synchrotron (1)
- Technology transfer (1)
- Tensile Properties (C) (1)
- Test setup (1)
- Testing procedure (1)
- Thixotropy (1)
- Ultrasound gel (1)
- Urban heat island effect (1)
- Versuche (1)
- Vicat (1)
- Viscosity modifying agent (1)
- Viskosität (1)
- Waste management (1)
- Welan gum (1)
- Working mechanism (1)
- XRD (1)
- Zement (1)
- Zeta potential (1)
Organisationseinheit der BAM
Paper des Monats
- ja (1)
Im Betonbau hat sich im Laufe der vergangenen Jahrzehnte ein grundlegender Wandel von einer Massenanwendung hin zu einer innovativen, zukunftsorientierten und leistungsbasierten Baustofftechnologie vollzogen. Heute besteht Beton nicht mehr lediglich aus Zement, Wasser und Gesteinskörnungen, sondern kann durch die Verwendung von Zusatzstoffen und chemischen Zusatzmitteln signifikant verbessert werden. Der im Bereich der Zusatzmittel erzielte Fortschritt ebnete zudem den Weg für die Entwicklung neuer Betontypen wie zum Beispiel selbstverdichtender Beton (SVB) und Hochleistungsbeton (HLB), indem die Verarbeitbarkeit vom Wasser-Zement-Wert (w/z) abgekoppelt wurde. Während der w/z und die Sieblinie der Gesteinskörnungen bei herkömmlichen Betontypen die für die Verarbeitbarkeit relevanten Mischungsparameter darstellten, weisen SVB und HLB komplexere Leistungsparameter auf; in puncto Leistungsfähigkeit fallen hier insbesondere die Mehlkornkomponenten ins Gewicht. Dadurch wird das System komplexer und zugleich anfälliger für Abweichungen bei der Produktion. Erschwert wird die Identifizierung möglicher Einsparpotenziale durch die Schwierigkeit der Vorhersage der Auswirkungen von Veränderungen im Produktionsprozess und bei der Mischung.
Viscosity modifying agents: Key components of advanced cement-based materials with adapted rheology
(2022)
Viscosity modifying agents (VMAs) are essential ingredients for the production of flowable cement-based materials. This paper presents an overview of commonly used VMAs and attempts to shed some light on the underlying physics at the origin of their mechanisms of action. The main molecular parameters of VMA controlling the rheological properties of the cement pore solution are highlighted. As the mechanisms of action of VMAs in cement-based materials are closely related to their affinity with the surface of cement particles, the adsorption of the main VMA types is discussed. The effect of VMAs on flow properties and stability of cement-based materials is presented for VMAs added without any superplasticizer, and then in systems incorporating both VMAs and superplasticizers. Finally, the effect of VMAs in enhancing concrete properties to secure adequate performance of different construction applications, and perspectives for future developments of novel cement-based materials made with VMAs are showcased.
The effect of resting time on the rheological properties of cement suspensions is generally explained by early formed structure and overconsumption of polycarboxylate superplasticizers (PCEs). In this paper, we propose that the influence of resting time on the rheological properties is closely related to size variation of non-absorbed PCE. To identify this, glass bead suspensions were prepared with various amounts of PCE and ionic solution, and their rheological properties were evaluated at various times. We found that the yield stress increases with time at higher PCE concentrations and higher ionic strength solutions. Adsorbed PCE during resting tends to bridge the particles rather than disperse them. In addition, it was found that hydrodynamic radius of PCE increased with resting time, and depletion forces resulting from non-absorbed PCE size changes correlate well with the increased yield stress.
Selbstverdichtender Beton verhält sich unter Temperatureinfluss anders als Normalbeton, da die Rheologie neben der fortschreitenden Hydratation zusätzlich durch die von der Zeit und dem Hydratationsfortschritt abhängige Adsorption von Fließmitteln beeinflusst wird. Anhand rheometrischer Betonversuche an SVB unterschiedlicher Entwurfskonzepte mit variierter anionischer Ladungsdichte im Fließmittel wird verdeutlicht, dass mehlkornreiche SVB bei niedrigen Temperaturen sehr robust sind, während bei hohen Temperaturen mehlkornärmere Entwürfe zu bevorzugen sind. Darüber hinaus wird gezeigt, wie sich unterschiedliche Fließmittelmodifikationen in bestimmten Temperaturbereichen verhalten. Anhand des Wasser-Feststoff-Verhältnisses und des Adsorptionsverhaltens von Fließmitteln werden die maßgeblichen Prozesse erläutert und Möglichkeiten für die Entwicklung robuster Mischungen für individuelle Temperaturbereiche aufgeführt.--------------------------------------------------------------------------------------------------------------------------------------------------------------
Regarding the temperature dependent performance, self-compacting concrete (SCC) distinguishes from normal concrete, since its rheology does not only depend upon the hydration itself but supplementary upon the adsorption of superplasticizers, which is affected by the time and the hydration progress. Based on rheometric concrete investigations with different SCC mixture compositions and varied anionic charge densities of the superplasticizers, it is shown that SCC, which is rich in powder components, shows robust performance at low temperatures, while compositions with lower powder contents are favourable at high temperatures. Furthermore, the performance of different superplasticizer modifications at different temperature ranges is demonstrated. The relevant processes are explained by means of the water to powder ratio as well as the adsorption behaviour of superplasticizers, and options for the development of robust mixture compositions for individual temperature ranges are itemised.
This paper presents the analysis of crack propagation in strain-hardening cement-based composite (SHCC) under tensile and flexural load by using acoustic emission (AE). AE is a non-destructive technique to monitor the development of structural damage due to external forces. The main objective of this research was to characterise the cracking behaviour in SHCC in direct tensile and flexural tests by using AE. A better understanding of the development of microcracks in SHCC will lead to a better understanding of pseudo strain-hardening behaviour of SHCC and its general performance. ARAMIS optical deformation analysis was also used in direct tensile tests to observe crack propagation in SHCC materials. For the direct tensile tests, SHCC specimens were prepared with polyvinyl alcohol (PVA) fibre with three different volume percentages (1%, 1.85% and 2.5%). For the flexural test beam specimens, only a fibre dosage of 1.85% was applied. It was found that the application of AE in SHCC can be a good option to analyse the crack growth in the specimens under increasing load, the location of the cracks and most importantly the identification of matrix cracking and fibre rupture or slippage.
Self-compacting concrete (SCC) differs substantially from normal concrete as regards the quantity of superplasticiser dosage. The functionality of superplasticisers, based on the polycarboxylate ether (PCE) superplasticiser customary with SCC, is nowadays very well understood at construction material research level. However, knowledge concerning pertinent correlations does not always permeate practice to an equal extent. PCEs are extremely polymorphic as opposed to earlier superplasticiser groups, which still possess a considerable proportion of the superplasticiser market. The geometry of polymers can be adjusted individually to performance characteristics required for certain uses. Yet, in selecting a superplasticiser for its specified rheological properties, a very strong influence can equally be exerted simultaneously on the subsequent hydration process. The charge density of the PCE employed also plays a key role in connection with both rheology and early hydration.
This paper presents the results of an interlaboratory study of the rheological properties of cement paste and ultrasound gel as reference substance. The goal was to quantify the comparability and reproducibility of measurements of the Bingham parameters yield stress and plastic viscosity when measured on one specific paste composition and one particular ultrasound gel in different laboratories using different rheometers and measurement geometries.
The procedures for both in preparing the cement paste and carrying out the rheological measurements on cement paste and ultrasound gel were carefully defined for all of the study’s participants. Different conversion schemes for comparing the results obtained with the different measurement setups are presented here and critically discussed. The procedure proposed in this paper ensured a reasonable comparability of the results with a coefficient of variation for the yield stress of 27% and for the plastic viscosity of 24%, despite the individual measurement series’ having been performed in different labs with different rheometers and measurement geometries.
The existing cement and concrete standards are not capable of making full use of the current technology capacity due to strong focus on conventional concrete and thus they are not fit for the current and future challenges of construction industry. The paper highlights shortcomings with regard to the implementation of the existing standards. It can be seen that future-oriented standards are generally required to contribute to a lower-carbon footprint of the industry. These changes are significantly more relevant in sub-Saharan Africa, due to the rapidly increasing urbanisation challenge and the enormous potentials to develop lower-carbon technologies than elsewhere in the world.
The built environment significantly impacts the health of individuals and populations in various ways. The health and durability of the built environment are intertwined with availability ofnaturally occurring and man-made resources and their supply chains. Therefore, resource con servation is a key to ensure sustainability of built environments. Many industrial wastes can be turned into valuable resources for reuse in construction of the built environment. For instance, biowaste (woody/ leafy biomass and animal waste) have been used to make construction adhesives (Fini et al., 2011), some urban wastes have been used in road construction (Poulikakos et al., 2017; Schmidt et al., 2021), end of life plastics and polymers have made their way to roadway construction, bio-oils and algae harvested from wastewater treatment plants has been used to make antiaging for outdoor building elements to mitigate UV aging (Kabir et al., 2021); sulfur has been used as an extender in asphalt and recycled mineral powders such as silica and alumina have been used to increase strength and durability against acidic compounds (Fini et al., 2019). These are just a few examples of recycling venues with beneficial uses in the built environment.
The construction and operation of the built environment and the traffic that it attracts or facilitates significantly contribute to the emis sion of greenhouse gasses (GHG) and cause air pollution. The direct and indirect impacts of GHG and air pollutants on the environment and so cieties have been weil established. The built environment can be used as a powerful platform not only for recycling and resource conservation but also to remove near-ground gaseous contaminants. This can be done via tailored design and engineering of adsorptive construction materials via recycling of waste materials. For instance, advanced sorbent systems can be made for removing C02, H2S, and formaldehyde from air. This re quires tailored sorbent design, topology optimization, and catalytic conversion of collected gaseous compounds to name a few.
This special issue covers innovative materials, methods, and man agement practices which aim to simultaneously address durability ofthe built environment, air quality, resource conservation, and supply chain resilience. Such innovative materials, methods, and management prac tices will transform the built environment into not only an active contributor to no waste, no pollution for healthy environment, but also a medium that converts the waste and pollution into beneficial products for use in the built environment, thereby promoting resource conser vation. Followings are examples of topics that the special issue is interested in:
• Venuses to advance resource conservation specifically via novel ap proaches in the built environment.
• Innovative construction materials for passive or active adsorption of harmful gaseous emissions to conserve air, energy, and water.
• Advanced materials, methods, and management practices to pro mote well-being of the built environment.
• Smart buildings to promote resource conservation.
• Research convergence in the built environment for zero waste, zero pollution economy.