Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (32)
- Zeitschriftenartikel (15)
- Beitrag zu einem Tagungsband (11)
- Posterpräsentation (4)
- Forschungsbericht (1)
Schlagworte
- MAG-Schweißen (23)
- Wasserstoff (20)
- Hochfester Feinkornbaustahl (16)
- Hydrogen (10)
- Wärmeführung (9)
- Implant-Test (8)
- High-strength steel (7)
- Hochfeste Feinkornbaustähle (7)
- Welding (7)
- High-strength steels (6)
- Kaltrisse (6)
- Eigenspannungen (5)
- Kaltriss (5)
- Neutron imaging (5)
- Heat treatment (4)
- Hydrogen-assisted cracking (4)
- Kaltrissprüfung (4)
- Residual stresses (4)
- X-ray refraction (4)
- Diffusible hydrogen (3)
- Hydrogen assisted cracking (3)
- Höherfester Feinkornbaustahl (3)
- Implant test (3)
- Nachwärmung (3)
- Schweißprozessparameter (3)
- TEKKEN (3)
- TEKKEN-Test (3)
- Wasserstoffkonzentration (3)
- Carrier gas hot extraction (2)
- Computed tomography (2)
- Fractography (2)
- GMA welding (2)
- GMAW (2)
- Gas metal arc welding (2)
- Heat control (2)
- Hydrogen concentration (2)
- Phase transformation (2)
- Process parameters (2)
- Steel (2)
- Synchrotron radiation (2)
- Wasserstoffunterstützte Rissbildung (2)
- 2101 duplex stainless steel (1)
- Aluminium alloy (1)
- Analyser based imaging (1)
- Analyser-based imaging (1)
- Austenit (1)
- Backlight (1)
- Bragg-edge imaging (1)
- CT (1)
- Computed tomography (CT) (1)
- Computertomographie (1)
- Dehydrogenation heat treatment (1)
- Duplex stainless steel (1)
- Duplexstahl (1)
- Experimental design (1)
- Ferrit (1)
- Heat-affected zone (1)
- Heißriss (1)
- High-strength structural steel (1)
- Hochfest (1)
- Hochfester Stahl (1)
- Hydrogen assisted cracking (HAC) (1)
- Hydrogen embrittlement (1)
- Hydrogen embrittlement (HE) (1)
- Höherfeste Feinkornbaustähle (1)
- Höherfester Stahl (1)
- Implant-test (1)
- LTT-Legierung (1)
- MAG Welding (1)
- MAG welding (1)
- Microcracking (1)
- Mill Scale (1)
- Mill scale (1)
- Modifizierter Sprühlichtbogen (1)
- Nahtgeometrie (1)
- Neutron (1)
- Neutron radiography (1)
- Neutron tomography (1)
- Prüfverfahren (1)
- Quenched (1)
- Radiography (1)
- Refraction (1)
- Residual Stress (1)
- Restraint (1)
- Rissbildung (1)
- Röntgenrefraktion (1)
- Scattering (1)
- Schallemmission (1)
- Schutzgasschweißen (1)
- Schweißen (1)
- Schweißparameter (1)
- Spannung (1)
- Stahl (1)
- Supermartensitic steel (1)
- Synchrotron (1)
- Synchrotron-Refraktion (1)
- TEKKEN test (1)
- Tempered High Strength Steel (1)
- Thermal conductivity device (1)
- Thermo-Mechanical Controlled Process (1)
- Tomography (1)
- Wasserstoffeintrag (1)
- Wasserstoffgradient (1)
- Wasserstoffversprödung (1)
- Weld metal cracking (1)
- Welding parameters (1)
- carrier gas hot extraction (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (32)
While the problem of the identification of mechanisms of hydrogen assisted damage has and is being thoroughly studied, the quantitative analysis of such damage still lacks suitable tools. In fact, while, for instance, electron microscopy yields excellent characterization, the quantitative analysis of damage requires at the same time large field-of-views and high spatial resolution. Synchrotron X-ray refraction techniques do possess both features. In this work, we show how synchrotron X-ray refraction computed tomography (SXRCT) can quantify damage induced by hydrogen embrittlement in a lean duplex steel, yielding results that overperform even those achievable by synchrotron X-ray absorption computed tomography. As already reported in literature, but this time using a non-destructive technique, we show that the hydrogen charge does not penetrate to the center of tensile specimens. By the comparison between virgin and hydrogen-charged specimens, we deduce that cracks in the specimen bulk are due to the rolling process rather than hydrogen-assisted. We show that (micro)cracks propagate from the surface of tensile specimens to the interior with increasing applied strain, and we deduce that a significant crack propagation can only be observed short before rupture.
Wasserstoff kann eine Rissbildung u.U. auch noch nach Tagen in der Schweißnaht bewirken. Dabei stellen höherfeste Stähle etablierte Kaltrissprüftests vor Herausforderungen. Generell nimmt die zur Rissvermeidung tolerierbare Wasserstoffkonzentration mit zunehmender Festigkeit der Werkstoffe ab. Zudem verändern weiterentwickelte Schweißverfahren die Nahtgeometrie und Wärmeeinbringung und die Ausbildung risskritischer Mikrostrukturen (z.B. Wärmeeinflusszone). Am Beispiel des Implant- und Tekken-Tests werden die Einsatz- u. Anwendungsgrenzen bewertet. Zu berücksichtigen ist, dass beim Schweißen eine äußere mechan. Beanspruchung durch bauteilspezifische Steifigkeitsverhältnisse wirksam ist. Zusätzlich werden weiterführende Prüfverfahren zur Bestimmung der Wasserstoffkonzentration und -diffusion in Schweißnähten vorgestellt, wie die Trägergasheißextraktion (TGHE) für die Ermittlung der Wasserstoffkonzentration (ISO 3690) oder Hochtemperaturdiffusionskoeffizienten.
Diese Werte sind für die schweißtechnische Praxis von großer Bedeutung, um Haltezeiten z.B. für das Wasserstoffarmglühen abzuleiten.
Dieses Dokument fasst den Projekfortschritt des BAM-Projektes "Ermittlung geeigneter Wärmeführungen zur Wasserstoffreduktion beim Schweißen höherfester Feinkornbaustähle mit modifiziertem Sprühlichtbogen" im Rahmen des Fachausschusses 1 "Schweißmetallurgie & Werkstoffverhalten" des DVS e. V. zusammen.
Dieses Dokument fasst den Projekfortschritt des BAM-Projektes "Ermittlung geeigneter Wärmeführungen zur Wasserstoffreduktion beim Schweißen höherfester Feinkornbaustähle mit modifiziertem Sprühlichtbogen" im Rahmen des Fachausschusses 1 "Schweißmetallurgie & Werkstoffverhalten" des DVS e. V. zusammen.
Dieses Dokument fasst den Projekfortschritt des BAM-Projektes "Ermittlung geeigneter Wärmeführungen zur Wasserstoffreduktion
beim Schweißen höherfester Feinkornbaustähle mit modifiziertem
Sprühlichtbogen" im Rahmen des Fachausschusses 1 "Schweißmetallurgie & Werkstoffverhalten" des DVS e. V. zusammen.
Dieses Dokument fasst den Projekfortschritt des BAM-Projektes "Ermittlung geeigneter Wärmeführungen zur Wasserstoffreduktion beim Schweißen höherfester Feinkornbaustähle mit modifiziertem Sprühlichtbogen" im Rahmen des Fachausschusses 1 "Schweißmetallurgie & Werkstoffverhalten" des DVS e. V. zusammen.
Modern arc processes, such as the modified spray arc (Mod. SA), have been developed for gas metal arc welding of high-strength structural steels with which even narrow weld seams can be welded. High-strength joints are subjected to increasingly stringent requirements in terms of welding processing and the resulting component performance. In the present work, this challenge is to be met by clarifying the influences on hydrogen-assisted cracking (HAC) in a high-strength structural steel S960QL. Adapted samples analogous to the self-restraint TEKKEN test are used and analyzed with respect to crack formation, microstructure, diffusible hydrogen concentration and residual stresses. The variation of the seam opening angle of the test seams is between 30° and 60°. To prevent HAC, the effectiveness of a dehydrogenation heat treatment (DHT) from the welding heat is investigated.
As a result, the weld metals produced at reduced weld opening angle show slightly higher hydrogen concentrations on average. In addition, increased micro- as well as macro-crack formation can be observed on these weld metal samples. On all samples without DHT, cracks in the root notch occur due to HAC, which can be prevented by DHT immediately after welding.
3D Charakterisierung wasserstoffunterstüzter Risse in Stahl mittels Synchrotron-Refraktions-CT
(2016)
Die Fehlertoleranz moderner hochfester Stähle gegenüber Prozessfehlern beim Fügen nimmt stetig ab und erfordert eine immer kritischere Beurteilung der Ergebnisse aus den vorhandenen Prüfverfahren. Deren Aussagekraft ist häufig zu gering und daher muss zum einen das wissenschaftliche Verständnis der Mikrokaltriss-Entstehung in diesen Stählen vertieft werden und zum anderen müssen die Prüfmethoden und Bewertungskriterien angepasst werden. Dies erfordert ein besseres Verständnis insbesondere der Kopplung von Eigenspannungen, Wasserstoffgehalten und der Wirkung äußerer Kräfte auf die Rissentstehung und das Risswachstum.
Erstmals soll mittels 3D-Synchrotron-Refraktions-Topographie an der BAMline am BESSY die Rissentstehung in mit Wasserstoff beladenen Zugproben charakterisiert werden. Diese Kenntnisse sollen in weiteren Untersuchungen auf Schweißnähte übertragen werden.
Beside quenched and tempered (QT) high strength steels advanced technologies in steel manufacturing provide steels produced by the thermo-mechanical controlled process (TMCP) with yield strength of 960 MPa. These steels differ in the carbon and micro-alloying element content. With variation of heat control TIG-welded dummy seams on both steel types were performed. Analyses concerning microstructure and residual stress evolution due to welding showed typical stress distributions according to common concepts. Yet, the TMCP-steel shows higher residual stresses than the QT-steel.
To better understand the mechanism of hydrogen assisted cracking (HAC), it is important to investigate the 3D structure of the cracks non-destructively. Since, cracks introduced by HAC are usually very small, conventional x-ray imaging methods often lack the required spatial resolution.
However, the detection of those cracks can be enhanced by taking advantage of refraction at interfaces within the sample.
To image this refractive deflection we employ analyser based imaging (ABI). In this work we aim at proving the enhanced crack detection of ABI by investigating an alluminum alloy weld.
Hydrogen in metals can cause a degradation of the mechanical properties with possible subsequent hydrogen assisted cracking (HAC). Though, the mechanism of HAC is not completely understood yet and thus suitable methods for in situ investigations to characterise the crack formation are needed. X-ray computed tomography (CT) is a well-known tool for analysing these properties. However, the effective resolution of the detector system limits the detection of small defects by CT. Analyser based imaging (ABI) takes advantage of x-ray refraction at interfaces between volumes of different density, i.e. of cracks, pores, inclusions, etc., within the sample to detect defects smaller than the resolution of the detector system. In this study, measurements on an aluminium alloy weld showed that ABI allows us to resolve the 3D structure of cracks undetected by absorption based CT. Prospective investigations will analyse HAC in steels.
Hydrogen in metals can cause a degradation of the mechanical properties with possible subsequent hydrogen assisted cracking (HAC). Though, the mechanism of HAC is not completely understood yet and thus suitable methods for in situ investigations to characterise the crack formation are needed. X-ray computed tomography (CT) is a well-known tool for analysing these properties. However, the effective resolution of the detector system limits the detection of small defects by CT. Analyser based imaging (ABI) takes advantage of x-ray refraction at interfaces between volumes of different density, i.e. of cracks, pores, inclusions, etc., within the sample to detect defects smaller than the resolution of the detector system. In this study, measurements on an aluminium alloy weld showed that ABI allows us to resolve the 3D structure of cracks undetected by absorption based CT. Prospective investigations will analyse HAC in steels.
Determination of hydrogen distributions in iron and steel using neutron radiography and tomography
(2015)
Um den wachsenden Anforderungen nach Leichtbau und Ressourceneffizienz im Kran-, Nutzfahrzeug- und Brückenbau gerecht zu werden, kommen in diesen Industriebranchen vermehrt hochfeste Feinkornbaustähle mit Streckgrenzen von mehr als 690 MPa zum Einsatz. Allerdings erfordern diese Stähle bei der schweißtechnischen Verarbeitung äußerste Sorgfalt, weil gerade die Sensibilität gegenüber einer Degradation der mechanischen Eigenschaften, durch den im Lichtbogen aufgenommenen Wasserstoff, mit steigender Festigkeit signifikant zunimmt und zur wasserstoffunterstützten Kaltrissbildung führen kann. In diesem Vortrag werden Ergebnisse vorgestellt, die den Einfluss von Kontaktrohrabstand, Drahtvorschub sowie Schweißspannung auf den Wasserstoffeintrag in Ein- und Mehrlagenschweißungen aus hochfestem Feinkornbaustahl zeigen. Dabei wird der konventionelle Lichtbogen mit dem modernen modifizierten Sprühlichtbogen verglichen. Ziel ist es, durch geeignete Wärmeführungen die Wasserstoffkonzentration in Schweißverbindungen zu reduzieren, um somit die Gefahr einer wasserstoffunterstützten Kaltrissbildung zu minimieren.
3D Crack analysis in hydrogen charged lean duplex stainless steel with synchrotron refraction CT
(2016)
Hydrogen in metals can cause a degradation of the mechanical properties, the so-called hydrogen embrittlement. In combination with internal stresses, hydrogen assisted cracking (HAC) can occur. This phenomenon is not completely understood yet. To better characterise the cracking behaviour, it is important to gain information about the evolution of the 3D crack network. For this purpose samples of lean duplex stainless steel were loaded with hydrogen by means of electrochemical charging and investigated by means of synchrotron refraction CT and SEM fractography after uniaxial tensile loading. Synchrotron refraction CT is an analyser-based imaging (ABI) technique. It uses a Si (111) single crystal as analyser, which is placed into the beam path between sample and detector. According to Bragg’s law only incident x-rays within a narrow range around the Bragg-angle are diffracted from the analyser into the detector. Hence, the analyser acts as an angular filter for the transmitted beam. This filtering allows to turn the refraction and scattering of x-rays into image contrast. Refraction occurs at all interfaces, where the density of the material changes and is more sensitive to density changes than the attenuation. Therefore, it is possible to detect smaller cracks than with classical x-ray imaging techniques, like CT, with comparable spacial resolution. It also visualises the 3D structure of the cracks and gains quantitative information about their morphology and distribution. Since cracks introduced by HAC are usually very small and have a small opening displacement, synchrotron refraction CT is expected to be well suited for imaging this cracking mechanism and can be a valuable tool to characterise the formation and the evolution of a 3D crack network.
Neutron Bragg-edge imaging was applied for the visualization of a γ-Austenite to α'-martensite phase transformation. In the present study, a super martensitic
stainless steel sample was heated until complete austenitization and was subsequently cooled down to room temperature. The martensitic phase Transformation started at Ms = 190 °C. Using a monochromatic neutron beam with λ = 0.390 nm, the transmitted intensity was significantly reduced during cooling below Ms, since the emerging martensitic phase has a higher attenuation coefficient than the austenitic phase at this wavelength. The phase Transformation process was visualized by filming the transmission images from a scintillator screen with a CCD camera with a temporal resolution of 30 s and a spatial
resolution of 100 µm.