Filtern
Dokumenttyp
Schlagworte
- Bariumalumoborosilicate glass (1)
- Bariumalumoborosilicate glass surfaces (1)
- Ceramics (1)
- Femtosecond laser ablation (1)
- Femtosecond techniques (1)
- Laser (1)
- Laser ablation (1)
- Laser cleaning (1)
- Nanosecond techniques (1)
- Optical properties (1)
Eingeladener Vortrag
- nein (3)
Ultra-short pulse laser seeding techniques for silicon crystallite growth on amorphous substrates
(1999)
Near-ablation threshold investigations focusing on the generation of periodic nanostructures and their correlation with physico-chemical
properties of the solid phase such as e.g., the material-dependent surface energy, were conducted. Molecular dynamic modelling in the
sub-picosecond time domain was used to consider ultrafast opto-electronic processes triggering surface reorganization reactions.
Fluid containment of solid interfaces showed strong influence on the resulting micro- and nanostructures due to its drastic reduction of the
surface energy. The phenomena are discussed in respect to the minimization of the surface free energy in dependence of material composition
and interfacial structure.
The interaction of nanosecond laser pulses in the ultraviolet wavelength range and femtosecond laser pulses in the near-infrared region with the direct semiconductor SiC and the composite compound SiC-TiC-TiB2 was investigated in respect to resulting physicochemical processes. Surface analytical techniques, such as XPS, µ-Raman, and EDX were used to identify the chemical changes between untreated and laser-treated areas. Single-pulse irradiation led to material
modifications in the condensed state in most instances. Multi-pulse results differed depending on the pulse duration. In the nanosecond case, melting of the surface and redeposited material (debris) were observed. With femtosecond pulses instead, only negligible melting and few debris could be detected. Additionally, periodic structures (ripples) appeared, with parallel orientation and in most cases two different periodicities for a particular material. Laser ablation of all the studied compound materials exhibited preferential ablation of the lighter component elements. Crystal structure changes of the irradiated surface were observed as a consequence of laser-induced melting and resolidification. An oxidation process interfered with all this processes so that unstoichiometric oxides were formed.
The interaction of nanosecond laser pulses in the ultraviolet wavelength range and femtosecond laser pulses in the near-infrared region with the semiconductor SiC and the composite compound SiCTiCTiB2 was investigated. Surface analytical techniques, such as XPS, depth profile (DP), and micro-Raman spectroscopy (?-RS) were used to identify the chemical changes between untreated and laser-treated areas. Single-pulse irradiation led to material modifications in the condensed state in most instances. Multi-pulse results differed depending on the pulse duration. Crystal structure changes were observed as a consequence of laser-induced melting and resolidification. In air contact all components underwent oxidation reactions according to thermodynamic expectations. Exceptions were observed under exclusion of oxygen, SiC was reduced to elemental Si.
We present surface micro-modifications of bariumalumoborosilicate glasses with a high transformation temperature near 700 °C. Laser processing of the glass substrate was realized by using ultra-short laser pulses at 800 nm. The morphological conversion of the laser-treated surfaces was characterized by scanning force microscopy and nano-indentation. A hardness increase by at least a factor of six on the laser ablation crater edge relative to illuminated non- ablated areas shows that the material in the crater walls underwent drastic morphological and mechanical changes. In this heat- and shock-affected zone, the material became more elastic as a result of increased stress.