Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (301) (entfernen)
Sprache
- Englisch (249)
- Deutsch (38)
- Russisch (9)
- Mehrsprachig (2)
- Italienisch (1)
- Serbisch (1)
- Chinesisch (1)
Schlagworte
- Laser beam welding (60)
- Laser welding (18)
- Laser metal deposition (15)
- Resistance spot welding (15)
- Welding simulation (15)
- Additive manufacturing (14)
- Microstructure (14)
- Mechanical properties (11)
- Solidification cracking (11)
- Aluminium (9)
- Laserstrahlschweißen (9)
- Gas metal arc welding (8)
- Hybrid laser-arc welding (8)
- Numerical simulation (8)
- Welding (8)
- Electromagnetic weld pool support (7)
- Widerstandspunktschweißen (7)
- Design of experiments (6)
- Distortion (6)
- Electromagnetic weld pool control (6)
- Festigkeit (6)
- Hartmann effect (6)
- Hochfester Stahl (6)
- Hybrid laser arc welding (6)
- Lorentz force (6)
- Natural convection (6)
- Residual stress (6)
- Rissbildung (6)
- Thick-walled steel (6)
- Werkstofffragen (6)
- Artificial neural network (5)
- DED (5)
- Electron beam welding (5)
- Friction stir welding (5)
- Grain refinement (5)
- High power laser beam welding (5)
- Laser hybrid welding (5)
- Liquid metal embrittlement (5)
- Additive Fertigung (4)
- Advanced high strength steels (4)
- Austenitic stainless steels (4)
- Corrosion (4)
- Crack (4)
- Critical strain (4)
- Element transport (4)
- GTA welding (4)
- Hardness (4)
- Heat conduction (4)
- Heat treatment (4)
- Hot cracking (4)
- Magnetohydrodynamics (4)
- Marangoni flow (4)
- Neural networks (4)
- Numerical modeling (4)
- Numerical welding simulation (4)
- Porosity (4)
- Quality assurance (4)
- Residual stresses (4)
- Solidification (4)
- Weld defects (4)
- Weld pool shape (4)
- Weldability (4)
- 9%Ni steel (3)
- Adaptive control (3)
- Automotive application (3)
- Crack formation (3)
- Deep penetration (3)
- Directed energy deposition (3)
- FEA (3)
- Fatigue (3)
- Finite element analysis (3)
- Finite element simulation (3)
- Full penetration (3)
- Gap (3)
- Grain size (3)
- High strength steel (3)
- High strength steels (3)
- High-strength low-alloy steel (3)
- Inconel 718 (3)
- Liquid Metal Embrittlement (3)
- MAG welding (3)
- Magnetic field (3)
- Marangoni stresses (3)
- Mathematical modeling (3)
- Mathematical models (3)
- Mechanical mismatching (3)
- Multi-physical modelling (3)
- Partial penetration (3)
- Phase transformation (3)
- Pipeline (3)
- Post-weld heat treatment (3)
- Schweißsimulation (3)
- Sensitivity analysis (3)
- Simulating (3)
- Simulation (3)
- Stress reduction (3)
- TRIP steel (3)
- Temperature (3)
- Weld pool dynamics (3)
- Widerstandspressschweißen (3)
- AHSS (2)
- Advanced high strength steel (2)
- Aluminium alloys (2)
- Arc welding (2)
- Auftragschweißen (2)
- Austenite stability (2)
- Automated manufacturing (2)
- Automotive industry (2)
- Bulge effect (2)
- CCT sensitivity (2)
- CO2 lasers (2)
- Circumferential weld (2)
- Clad steels (2)
- Cladding parameter (2)
- Coarse-grained heat-affected zone (2)
- Columnar to equiaxed transition (CET) (2)
- Cracking (2)
- Cracks (2)
- Data preparation (2)
- Digital image correlation (2)
- Dimensional accuracy (2)
- Directed Energy Deposition (2)
- Directivity (2)
- Dissimilar metal weld overlays (2)
- Dual phase steel (2)
- Duplex (2)
- Duplex AISI 2205 (2)
- Duplex stainless steel (2)
- Duplex stainless steels (2)
- EBSD (2)
- EDXRD (2)
- Electromagnetically controlled laser beam welding (2)
- Elektronenstrahlschweißen (2)
- End crater (2)
- Energy input (2)
- Equivalent heat source (2)
- Fahrzeugbau (2)
- Fatigue life (2)
- Fatigue tests (2)
- Fiber laser (2)
- Fibre-optic lasers (2)
- Fusion zone size (2)
- GMA welding (2)
- Gap bridgeability (2)
- Gas shielded arc welding (2)
- Gas tungsten arc welding (GTAW) (2)
- Heat flow (2)
- High energy beam welding (2)
- High power (2)
- High-power laser beam welding (2)
- High-pressure pipelines (2)
- High-strength steel (2)
- Hot crack (2)
- Hot cracking test (2)
- Hybrid welding (2)
- Instrumentierte Eindringprüfung (2)
- Keyhole (2)
- Kornfeinung (2)
- Künstliche Intelligenz (2)
- L-PBF (2)
- Laser (2)
- Laser beam weliding (2)
- Laser beams (2)
- Laser cladding (2)
- Laser energy distribution (2)
- Laser keyhole welding (2)
- Laser scanner optics (2)
- Laser-Pulver-Auftragschweißen (2)
- Laser-hybrid welding (2)
- Laserhybridschweißen (2)
- Life Cycle Assessment (LCA) (2)
- Local critical strain (2)
- Longitudinal weld (2)
- Manganese (2)
- Marangoni effect (2)
- Matching ferritic welding electrode (2)
- Material flow (2)
- Material questions (2)
- Melt pool dynamics (2)
- Metal mixing (2)
- Modified spray arc (2)
- Molten pool (2)
- Nickel (2)
- Nickel alloys (2)
- Notch stress approach (2)
- Numerical modelling (2)
- Numerical process simulation (2)
- Optical flow (2)
- Optimisation (2)
- Orbital welding (2)
- Partial penetration welding (2)
- Pipe manufacturing (2)
- Porosity prevention (2)
- Preheating (2)
- Process monitoring (2)
- Process simulation (2)
- Punktschweißverbindung (2)
- Qualitätssicherung (2)
- Ray tracing (2)
- Refill friction stir spot welding (2)
- Repair welding (2)
- Schutzgasschweißen (2)
- Schweißeignung (2)
- Schweißnahtfehler (2)
- Seam geometry (2)
- Shielding gases (2)
- Simulation and calculation (2)
- Simulation und Berechnung (2)
- Single pass welding (2)
- Spannungen (2)
- Spot welding (2)
- Stainless steels (2)
- Strength (2)
- Stresses (2)
- Submerged arc welding (2)
- Superellipse (2)
- Synchrotron (2)
- Sysweld (2)
- Temperature field (2)
- Tensile tests (2)
- Thermal analysis (2)
- Thermal cycles (2)
- Thermo-fluid flow (2)
- Ti-6Al-4V (2)
- Titanium alloy (2)
- Transformable steels (2)
- Tubular X-joints (2)
- Vapor plume (2)
- Verzug (2)
- WIG-Schweißen (2)
- Welding-induced distortion (2)
- Welding-induced residual stress (2)
- Wire arc additive manufacturing (2)
- Wärmebehandlung (2)
- YAG lasers (2)
- laser welding (2)
- resistance spot welding (2)
- 2D ray tracing (1)
- 3D ray tracing (1)
- 9% Ni Steel (1)
- AC magnetic field (1)
- AGIL (1)
- AM (1)
- AM feature integration (1)
- AZ31 magnesium alloy (1)
- Adaptive welding beam oscillation (1)
- Additive Manufacturing (1)
- Advanced High-Strength Steel (AHSS) (1)
- Advanced high-strength steel (1)
- Advanced high-strength steels (1)
- Al Mg Si alloys (1)
- Al Ti5B1 (1)
- AlMg0.7SiTiB filler wire (1)
- Alloy 1050A (1)
- Alloy 5083 (1)
- Alloy 6082 (1)
- Aluminium alloy (1)
- Aluminium-Legierung 5083 (1)
- Aluminium/Aluminiumlegierungen (1)
- Aluminum alloy 2024-T3 (1)
- Aluminum alloys (1)
- Aluminum bronze (1)
- Analysis techniques (1)
- Analytical approach (1)
- Anisotropic austenitic steel (1)
- Anisotropic austenitic weld (1)
- Artificial Intelligence (1)
- Artificial intelligence (1)
- As-shielded arc welding (1)
- Austenitic (1)
- Austenitic welding electrode (1)
- Automation (1)
- Automatisierte Fertigung (1)
- Automobile engineering (1)
- Automobiles (1)
- Automobilindustrie (1)
- Automotive (1)
- Automotive assembly (1)
- Axial force (1)
- Bead-on-plate welds (1)
- Beam attenuation (1)
- Beam welding (1)
- Bending test (1)
- Boundary element method (1)
- Build-up strategy (1)
- Bulge formation (1)
- Bulging (1)
- Bulging effect (1)
- Bulging effects (1)
- C-Mn steels (1)
- CFD model (1)
- CO2 laser (1)
- CO2- and Nd:YAG laser (1)
- Calculation (1)
- Carbon dioxide footprint (1)
- Carbon steels (1)
- Charpy impact toughness (1)
- Cimensional Accuracy (1)
- Clustering (1)
- Coarse grained heat affected zone (1)
- Columnar crystal growth (1)
- Combined processes (1)
- Computer vision (1)
- Condensation (1)
- Condition monitoring (1)
- Continuous cooling transformation diagrams (1)
- Control magnetic field (1)
- Controlled tensile weldability test (1)
- Convolutional neural network (1)
- Corrosion resistance (1)
- Crack growth (1)
- Crash behaviour (1)
- Crater (1)
- Critical strain rate (1)
- Critical strains (1)
- Cryogenic steel (1)
- Crystal branch development (1)
- DED-EB (1)
- DED-LB (1)
- DIC (1)
- DIP transfer (1)
- Damage prediction (1)
- Deep learning (1)
- Deep penetration laser beam welding (1)
- Defects (1)
- Deformation (1)
- Deformation behaviour (1)
- Deformed geometry (1)
- Dendrite growth (1)
- Density measurement (1)
- Deposition rate (1)
- Deposition welding (1)
- Diagnostic of the torch (1)
- Die-cast aluminum (1)
- Die-casted aluminum (1)
- Digital Image Correlation (1)
- Digitalisierung (1)
- Digitalization (1)
- Digitization (1)
- Direct energy deposition (1)
- Directed Energy Depositio (1)
- Discontinuities (1)
- Dissimilar joints (1)
- Dissimilar welding (1)
- Drive pinion (1)
- Drop out of bead (1)
- Duplex nucleation theory (1)
- Duplex steels (1)
- Dynamic fracture tests (1)
- EBAM (1)
- Economic wide technology replacement (1)
- Edge quality (1)
- Eigenspannungen (1)
- Electro-thermomechnical model (1)
- Electrode geometry (1)
- Electromagnetic (1)
- Electromagnetic backing (1)
- Electromagnetic influence (1)
- Electromagnetic rectification (1)
- Electromagnetic stirring (1)
- Electromagnetic support (1)
- Electromagnetic supported degassing (1)
- Electromagnetic weld control (1)
- Electromagnetic weld pool support system (1)
- Elektromagnetische Badstütze (1)
- Elektromagnetische Schmelzbadunterstützung (1)
- Embedded electronics (1)
- Energy density distribution (1)
- Energy dispersive synchrotron X-ray diffraction (1)
- Energy efficiency (1)
- Energy parameters of the arc (1)
- Environment (1)
- Environmental impact categories (1)
- Epitaxial nucleation (1)
- Equivalent stress concentration factors (1)
- Experimental determination (1)
- Experimental validation (1)
- FEM (1)
- Fair salary (1)
- Fatigue loading (1)
- Ferromagnetic steel (1)
- Ferromagnetic steels (1)
- Ferrous metals and alloys (1)
- Fibre lasers (1)
- Filler wire (1)
- Filler wire mixing (1)
- Fillet welds (1)
- Fine-grained Steel (1)
- Finite Element Method (1)
- Finite element method (1)
- Finite element method (FEM) (1)
- Finite elements analysis (1)
- Flange width (1)
- Flow (1)
- Fluid flow (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Fracture (1)
- Fracture behaviour (1)
- Frequency (1)
- Fresnel reflection (1)
- Friction welding (1)
- Full penetration laser welding (1)
- Full penetration welding (1)
- Functional-analytical solution (1)
- Fusion zone (1)
- Fusion zone profile (1)
- Fusion zone, nickel alloys (1)
- GMA surfacing (1)
- GMA-laser hybrid welding (1)
- GMAW (1)
- GTAW (1)
- Galvanized steel (1)
- Gap bridging (1)
- Gap compensation (1)
- Gaps (1)
- Gas-shielded arc welding (1)
- General analytical solutions (1)
- Gleeble experiments (1)
- Gleeble testing (1)
- Global optimisation (1)
- Grade S960QL steel (1)
- Grain structure (1)
- Greenhouse gas mitigation (1)
- Greens function method (1)
- HAZ crack (1)
- HSLA (1)
- Hardly separable problem (1)
- Heat Input (1)
- Heat Treatment (1)
- Heat generation (1)
- Heat input (1)
- Heat source calibration (1)
- Heat source configuration (1)
- Heat source models (1)
- Heat transfer (1)
- Heißrisse (1)
- High brightness (1)
- High power fibre laser (1)
- High power welding (1)
- High process speeds (1)
- High-Power Welding (1)
- High-power fibre laser (1)
- High-power laser beam (1)
- High-strength fine-grained steels (1)
- High-strength steel sheets (1)
- Higher manganese content (1)
- Highspeed-plasma-laser-cladding (1)
- Hochleistungsschweißen (1)
- Hohlprofilknoten (1)
- Hold time (1)
- Hot Cracks (1)
- Human health (1)
- Hybrid Laser Arc Welding (1)
- Hybrid Laser arc Welding (1)
- Hybrid Laser-Arc Welding (1)
- Hybridschweißen (1)
- Hydrostatic force compensation (1)
- Imaging (1)
- Impact Absorbed Energy (1)
- Impact absorbed energy (1)
- In situ strain (1)
- In-situ synchrotron diffraction (1)
- Inconel 625 (1)
- Inconel 939 (1)
- Industrial and Manufacturing Engineering (1)
- Industrial application (1)
- Industrial parts (1)
- Instumented indentation test (1)
- Integrated alignment features (1)
- Inverse heat conduction problem (1)
- Inverse modelling (1)
- Joint-site structure (1)
- Kaltzähe Stähle (1)
- Kerbspannungskonzept (1)
- Keyhole collapse (1)
- Keyhole mode welding (1)
- Keyhole stability (1)
- Kl (1)
- Körperschall (1)
- LMD (1)
- LME (1)
- Lamé curves (1)
- Lamé curves approximation (1)
- Laser Beam Welding (1)
- Laser Metal Deposition (1)
- Laser Metal Deposition (LMD) (1)
- Laser Powder Bed Fusion (1)
- Laser Welding (1)
- Laser arc-hybrid welding (1)
- Laser beam Welding (1)
- Laser cutting (1)
- Laser implantation (1)
- Laser melting (1)
- Laser metal fusion (1)
- Laser powder bed fusion (1)
- Laser powder cladding (1)
- Laser powder-based directed energy deposition (1)
- Laser surfacing (1)
- Laser-MSG-Hybridschweißen (1)
- Laser-Pulver-Auftragsschweißen (1)
- Laser-metal-deposition (1)
- Laserschweißen (1)
- Life cycle assessment (1)
- Life cycle assessment (LCA) (1)
- Life-cycle assessment (1)
- Lifetime (1)
- Lightweight design (1)
- Liquid Metal Embrittlement (LME) (1)
- Local fatigue spproaches (1)
- Local reduced pressure (1)
- Lokale Effekte (1)
- Lokale Festigkeit (1)
- Lokale Spannungs-Dehnungskurven (1)
- Low alloy steels (1)
- Low feed rates (1)
- Low heat input GMA welding (1)
- Low heat input Gma welding (1)
- Low transformation temperature (LTT) alloy (1)
- Low transformation temperature filler material (1)
- Lötrissigkeit (1)
- MHD (1)
- MIG welding (1)
- MRO (1)
- MSG-Schweißen (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetfelder (1)
- Magnetic bath support (1)
- Maritime industry (1)
- Martensitbildung (1)
- Martensite kinetic (1)
- Martensite start temperature (1)
- Martensite transformation (1)
- Martensitic transformation (1)
- Matching ferritic filler metal (1)
- Material modeling (1)
- Measurement (1)
- Mechanical Properties (1)
- Mechanical properties of the joints (1)
- Mechanical property (1)
- Mechanical strength (1)
- Mechanical-technological properties (1)
- Mesh analysis (1)
- Metallic vapour plume (1)
- Metallurgische Fragen (1)
- Microcracking (1)
- Microstructure Tensile strength (1)
- Misalignment of edges (1)
- Mobile vacuum (1)
- Model calibration (1)
- Model order reduction (1)
- Model prediction (1)
- Modeling (1)
- Modeling of fluid flow (1)
- Modellierung (1)
- Modified varestraint transvarestraint (MVT) hot cracking test (1)
- Molten pool dynamics (1)
- Monitoring systems (1)
- Multi-materials joining (1)
- Multi-pass welding (1)
- Multi-physical modeling (1)
- Multi-regional inputeoutput data (1)
- Multiple reflections (1)
- Multirun welding (1)
- Narrow gap welding (1)
- Neuronales Netz (1)
- Ni-based austenitic filler metal (1)
- Ni-based austenitic welding electrode (1)
- Ni-based superalloy (1)
- NiCrBSi (1)
- Non-destructive testing (1)
- Normen (1)
- Novel metrology (1)
- Novel optical measurement (1)
- Numerical Simulation (1)
- Numerical analysis (1)
- Numerical approach (1)
- Numerical simulations (1)
- Numerical welding simulations (1)
- Numerische Simulation (1)
- Open science (1)
- Open source (1)
- Optical measurement (1)
- Optical measurment technique (1)
- Optimization (1)
- Ortsaufgelöst (1)
- Oscillating magnetic field (1)
- Oscillating vapor plume (1)
- PBF-LB/M (1)
- Particles (1)
- Path planning (1)
- Periodic solidification pattern (1)
- Phase field method (1)
- Pin profile (1)
- Pipe Welding (1)
- Pipe laying (1)
- Pipe weld preparation (1)
- Pipe welding (1)
- Pipeline steel of grade X120 (1)
- Plane crystalization (1)
- Plasma cutting (1)
- Plasma-cut samples (1)
- Plastic deformation (1)
- Plume (1)
- Plume heating (1)
- Poren (1)
- Pores (1)
- Porosity reduction (1)
- Position welding (1)
- Post-welding heat treatment (1)
- Precipitation hardening aluminum alloys (1)
- Prior austenite grain size (1)
- Process chain (1)
- Process combinations (1)
- Process innovations (1)
- Process monitoring and control (1)
- Process procedures (1)
- Process stability (1)
- Proper generalized decomposition (1)
- Prozesskombinationen (1)
- Prozessüberwachung (1)
- Pufferschichten (1)
- Pulsed laser beam welding (1)
- Punktschweißkleben (1)
- Quality monitoring (1)
- Qualität (1)
- RSW (1)
- Ray teacing (1)
- Ray-tracing methods (1)
- Reference lists (1)
- Research data management (1)
- Resistance Spot Welding (RSW) (1)
- Resistance pressure welding (1)
- Resource efficiency (1)
- Retained austenite (1)
- Rissanfälligkeit (1)
- Robots (1)
- SEM (1)
- SMAW (1)
- Schutzgas (1)
- Schweißnahtgeometrie (1)
- Schweißnahtimperfektionen (1)
- Schweißunregelmäßigkeiten (1)
- Secondary heat source (1)
- Selective Laser Melting (1)
- Selektive-laser-melting (1)
- Sensitivitätsanalyse (1)
- Sensor (1)
- Sensors (1)
- Shear strength (1)
- Sheet (1)
- Shielding atmosphere (1)
- Ship building (1)
- Shipbuilding steel (1)
- Shrinkage (1)
- Similar and dissimilar material spot weld (1)
- Simufact.welding (1)
- Single-pass welding (1)
- Social Life Cycle Assessment (SLCA) (1)
- Software (1)
- Spannungs-Dehnungskurve (1)
- Stainless Steel (1)
- Stainless austenitic and duplex steels (1)
- Stainless steel (1)
- Standards (1)
- Steady-state weld pool (1)
- Steel and Al (1)
- Steels (1)
- Stiffness (1)
- Stochastic search method (1)
- Strain field (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Strain rate (1)
- Strain rates (1)
- Strain-rate (1)
- Stress-strain behavior (1)
- Structural stress approach (1)
- Super martensitic filler material (1)
- Superalloy (1)
- Surface cracks (1)
- Surface roughness (1)
- Surface structuring (1)
- Sustainability assessment (1)
- System technology (1)
- TIG welding (1)
- TRIP - transformation induced plasticity (1)
- Tack welding (1)
- Tandem gas metal arc welding (1)
- Tandem welding (1)
- Tear tests (1)
- Technical crack detection (1)
- Temperature distribution (1)
- Temperature field generation (1)
- Tensile Strength (1)
- Tensile properties (1)
- Tensile resistance spot welding experiment (1)
- Tensile strength (1)
- Tensileshear (1)
- Testing method (1)
- Texture (1)
- Thermal energy generation (1)
- Thermal softening (1)
- Thermo physical simulation (1)
- Thermo-fluid dynamics (1)
- Thermography (1)
- Thermomechanical material properties (1)
- Thermophysical material properties (1)
- Thick materials (1)
- Thick plate (1)
- Thick plate welding (1)
- Thick plates (1)
- Thick steel plates (1)
- Thick walled parts (1)
- Thick-Walled Steel (1)
- Thick-plate welding (1)
- Thick-walled Structures (1)
- Thin steel plates (1)
- Three-dimensional crystallization (1)
- Ti3Al2.5V (1)
- Tick plates (1)
- Time-to-solution (1)
- Tool torque (1)
- Torsion (1)
- Toughness (1)
- Transformation induced plasticity (1)
- Transformation induced plasticity (TRIP) (1)
- Transformation-induced plasticity (TRIP) (1)
- Transient heat transfer (1)
- Traverse force (1)
- Tube welding (1)
- Tubular joints (1)
- Tungsten carbide (1)
- Turbine blade (1)
- Turbine components (1)
- Two-dimensional solidification (1)
- Two-run welding technique (1)
- Ultrasonic C-scan image (1)
- Ultrasonic field (1)
- Ultrasonic non-destructive evaluation (1)
- Ultrasonic vibration (1)
- Umweltschutz (1)
- Unalloyed steels (1)
- Unterpulverschweißen (1)
- V groove (1)
- V-notch impact toughness (1)
- Vakuum (1)
- Vapor recondensation (1)
- Vaporization (1)
- Vehicle bodies (1)
- Vehicle construction (1)
- Viscoplasticity (1)
- Volume heat source (1)
- Volumetric heat source (1)
- Wear resistance (1)
- Weld end crater (1)
- Weld imperfections (1)
- Weld metal (1)
- Weld microstructure (1)
- Weld plan modification (1)
- Weld pool (1)
- Weld pool behavior (1)
- Weld pool modeling (1)
- Weld pool stabilization (1)
- Weld pool support (1)
- Weld root (1)
- Weld seam geometry (1)
- Weldbonded joints (1)
- Weldbonding (1)
- Welding Current (1)
- Welding Simulation (1)
- Welding parameter (1)
- Welding process simulation (1)
- Welding residual stress (1)
- Welding residual stresses (1)
- Welding thermal cycle (1)
- Weldx (1)
- Werkstoffranking (1)
- Windkraftanlagen (1)
- Wineglass shape (1)
- Wire electron beam additive manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- Work-flow (1)
- Wärmequellenkonfiguration (1)
- X-ray computer tomography (1)
- Zinc (1)
- Zinc coated steel (1)
- Zink (1)
- Zinkbeschichtung (1)
- cryogenic steel (1)
- digital image correlation (1)
- dual phase steel (1)
- hardness (1)
- hochfeste Stähle (1)
- local effects (1)
- microstructure (1)
- quality assurance (1)
- sensitivity analysis (1)
- strength (1)
- tensile strength (1)
- vacuum (1)
- welding residual stresses (1)
- Äquivalente Spannungskonzentrationsfaktoren (1)
- Ökobilanz (1)
- Ökonomische und ökologische Vorteile (1)
- ГИДРОДИНАМИКА (1)
- КОНВЕКЦИЯ (1)
- ЛАЗЕРНАЯ СВАРКА (1)
- МЕТОД КОНЕЧНЫХ ЭЛЕМЕНТОВ (1)
- СВАРОЧНАЯ ВАННА (1)
- ТЕМПЕРАТУРНОЕ ПОЛЕ (1)
- ТЕПЛОПРОВОДНОСТЬ (1)
- ЧИСЛЕННОЕ МОДЕЛИРОВАНИЕ (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (143)
- 9.3 Schweißtechnische Fertigungsverfahren (140)
- 5 Werkstofftechnik (2)
- 5.2 Metallische Hochtemperaturwerkstoffe (2)
- 9.0 Abteilungsleitung und andere (2)
- 5.5 Materialmodellierung (1)
- 7 Bauwerkssicherheit (1)
- 7.7 Modellierung und Simulation (1)
- 9.6 Additive Fertigung metallischer Komponenten (1)
The present work deals with the recently confirmed widening of the weld pool interface, known as a bulging effect, and its relevance in high power laser beam welding. A combined experimental and numerical approach is utilized to study the influence of the bulge on the hot cracking formation and the transport of alloying elements in the molten pool. A technique using a quartz glass, a direct-diode laser illumination, a high-speed camera, and an infrared camera is applied to visualize the weld pool geometry in the longitudinal section. The study examines the relevance of the bulging effect on both, partial and complete penetration, as well as for different sheet thicknesses ranging from 8 mm to 25 mm. The numerical analysis shows that the formation of a bulge region is highly dependent on the penetration depth and occurs more frequently during partial penetration above 6 mm and complete penetration above 8 mm penetration depth, respectively. The location of the bulge correlates strongly with the cracking location. The obtained experimental and numerical results reveal that the bulging effect increases the hot cracking susceptibility and limits the transfer of alloying elements from the top of the weld pool to the weld root.
The study deals with the determination of the influence of an externally applied oscillating magnetic field on the melt pool dynamics in high power laser beam and hybrid laser arc welding processes. An AC magnet was positioned under the workpiece which is generating an upward directed electromagnetic force to counteract the formation of the droplets. To visualise the melt flow characteristics, several experiments were carried out using a special technique with mild steel from S355J2 with a plate thickness of up to 20 mm and a quartz glass in butt configuration. The profile of the keyhole and the melt flow were recorded with a highspeed camera from the glass side. Additionally, the influence of the magnetic field orientation to the welding direction on the filler material dilution on laser hybrid welding was studied with variating oscillation frequency. The element distribution over the whole seam thickness was measured with X-ray fluorescence (XRF). The oscillation frequency demonstrated a great influence on the melt pool dynamics and the mixing of the elements of the filler wire. The highspeed recordings showed, under the influence of the magnetic field, that the melt is affected under strong vortex at the weld root, which also avoids the formation of droplets.
In recent years, it was shown that the introduction of additional oscillating and permanent magnetic fields to laser beam and laser-arc hybrid welding can bring several beneficial effects.
Examples are a contactless weld pool support for metals of high thickness suffering from severe drop-out when being welded conventionally or an enhanced stirring to improve the mixing of added filler material in the depth of the weld pool to guarantee homogeneous resulting mechanical properties of the weld. The latest research results show the applicability to various metal types over a wide range of thicknesses and welding conditions. The observations made were demonstrated in numerous experimental studies and a deep understanding of the interaction of the underlying physical mechanisms was extracted from numerical calculations.
Ni-based superalloys are well established in various industrial applications, because of their excellentmechanical properties and corrosion resistance at high temperatures. Despite the high development stage anda common industrial use of these alloys, hot cracking remains a major challenge limiting the weldability ofthe materials. As commonly known, the hot cracking susceptibility during welding increases with the amountof precipitation phases. Hence, a large amount of highstrength Ni-Alloys is rated as non-weldable. A newapproach based on electron beam welding at low feed rates shows great potential for reducing the hotcracking tendency of precipitation-hardened alloys. However, geometry and properties of the weld seamdiffer significantly in comparison to the common process range for practical uses. The aim of this study is toinvestigate the influence of welding parameters on the seam geometry at low feed rates between 1 mm/s and10 mm/s. For this purpose, 25 bead on plate welds on a 12 mm thick sheet made of Inconel 718 are carriedout. First, the relevant parameters are identified by performing a screening. Then the effects discovered arefurther studied by using a central composite design. The results show a significant difference between theanalyzed weld seam geometry in comparison to the well-known appearance of electron beam welded seams.
Motivated by the tensile strength loss of 9%Ni steel arc welded joints made using Ni-based austenitic filler metals, the feasibility of maintaining the tensile strength using matching ferritic filler metal has been demonstrated. In comparison with shielded metal arc welded joint made using Ni-based austenitic electrode ENiCrMo-6, higher tensile strength comparable to that of the base metal was obtained using matching ferritic electrode. Besides, sufficient impact toughness energies with much lower mismatch were obtained for weld metal and heat-affected zone.
Welded joint with a lower mechanical mismatching is of considerable importance for achieving acceptable combination of tensile strength and impact toughness. A better combination of These mechanical properties is ensured by applying a post weld heat treatment.
The combination of laser powder bed fusion (LPBF), known for its geometrical freedom and accuracy, and the nozzle-based laser metal deposition process (LMD), known for its high build-up rates, has great potential to reduce the additive manufacturing times for large metallic parts. For the industrial application of the LPBF-LMD hybrid process chain, it is necessary to investigate the infuence of the LMD process on the LPBF substrate. In addition, the build plate material also has a signifcant impact on the occurrence of distortion along the additive manufacturing process chain. In the literature, steel build plates are often used in laser-based additive manufacturing processes of Inconel 718, since a good metallurgical Bonding can be assured whilst reducing costs in the production and restoration of the build plates. This paper examines the distortion caused by LMD material deposition and the infuence of the build plate material along the hybrid additive manufacturing process chain. Twin cantilevers are manufactured by LPBF and an additional layer is subsequently deposited with LMD. The distortion is measured in the as-built condition as well as after heat treatment. The efect of diferent LMD hatch strategies on the distortion is determined. The experiments are conducted using the nickel-base alloy Inconel 718. The results show a signifcant infuence of LMD path strategies on distortion, with shorter tool paths leading to less distortion. The remaining distortion after heat treatment is considerably dependent on the material of the build plate.
This paper presents investigation results of a process for defect-free hybrid laser arc welding (HLAW) of closed circumferential welds. The process aims to avoid weld imperfections in the overlap area of a HLAW circumferential weld. A process control strategy for closing the circumferential weld was developed to achieve a defect-free overlap region by controlling the solidification conditions at the end of the weld. The controlled heat flow is achieved by adjusting the parameters of both welding processes involved, the laser beam as well as gas metal arc welding (GMAW) process. Experimental investigations were carried out on 12 mm to 15 mm thick tube sections. The influence of process parameters such as the laser ramp time, the change in magnification scale and the defocusing of the laser beam on the solidifi-cation conditions at the end of the circumferential weld was investigated to find an optimum strategy for ramping out the process energy. Within the framework of the experimental studies, it was demonstrated that defocusing the laser beam in the range between 60 mm and 100 mm over a short run-out area of the weld of approximately 15 mm led to a significantly better weld formation in the overlap area. A favourable cup-shaped weld shape could be achieved without a tendency to crack. The laser optics with a motor-driven lens system made it possible to increase the laser beam diameter without changing the position of the GMAW arc relative to the component surface.
The stability of the keyhole decreases for deep penetrated high-power laser beam welding. The keyhole tends to collapse with increasing laser power and e.g. keyhole induced porosity can occur. This study deals with the observation of the keyhole during high-power laser beam welding in partial penetration mode by means of a high-speed camera. A butt configuration of 25 mm thick structural steel and transparent quartz glass was used for the experiments. An oscillating magnetic field was applied perpendicular to the welding direction on the root side of the steel plate. The keyhole was highlighted with a coaxial diode laser. It was ascertained that the stability of the keyhole and the weld penetration depth were increased by applying an oscillating magnetic field with an oscillating frequency of 1.2 kHz and a magnetic flux density of 50 mT.
Hybrid laser-arc welding of thick-walled ferromagnetic steels with electromagnetic weld pool support
(2018)
The hybrid laser-arc welding (HLAW) process provides many advantages over laser welding and arc welding alone, such as high welding speed, gap bridgeability, and deep penetration. The developments in hybrid laser-arc welding technology using modern high-power lasers allow single-pass welding of thick materials. This technology can be used for the heavy metal industries such as shipbuilding, power plant fabrication, and line-pipe manufacturing. The obvious problem for single-pass welding is the growth of the hydrostatic pressure with increasing thickness of materials leading to drop-out of molten metal. This phenomenon is aggravated at slow welding velocities because of increasing weld seam width followed by a decrease of Laplace pressure compensating the hydrostatic pressure. Therefore, weld pool support is necessary by welding of thick materials with slow welding velocities. The innovative electromagnetic weld pool support system is contactless and has been used successfully for laser beam welding of aluminum alloys and austenitic and ferromagnetic steels. The support system is based on generating Lorentz forces within the weld pool. These are produced by an oscillating magnetic field orientated perpendicular to the welding direction. The electromagnetic weld pool support facilitates a decrease in the welding speed without a sagging and drop-out of the melt thus eliminating the limitations of weldable material thickness.
The hybrid laser arc welding (HLAW) process provides many advantages such as improved gap bridgeability, deep penetration and misalignment of edges, that is why the process is used increasingly in industrial applications e.g. shipbuilding, power plant industry and line-pipe manufacturing. The obvious encountered problem for single pass welding in flat position is the gravity drop-out at low welding velocities. With the usage of an electromagnetic weld pool support system, which is based on generating Lorentz forces within the weld pool, wide seams followed by reduced welding velocities could be achieved in this study leading to the realization of a gap bridgeability up to 1 mm, misalignment of edges up to 2 mm and a single pass weld up to 28 mm thickness with a 20-kW fibre laser. These developments expand the boundaries of the HLAW process for different industrial applications. As a result, less accurate preparation of the edges would be sufficient, which saves time for manufacturing.