Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (420) (entfernen)
Schlagworte
- Laser beam welding (94)
- Welding simulation (26)
- Resistance spot welding (22)
- Solidification cracking (21)
- Laser metal deposition (20)
- Additive manufacturing (19)
- Microstructure (16)
- Numerical simulation (16)
- Mechanical properties (15)
- Laser welding (14)
- Electromagnetic weld pool support (13)
- Distortion (10)
- High power laser beam welding (10)
- Laser hybrid welding (10)
- Gas metal arc welding (9)
- Hot cracking (9)
- Hybrid laser-arc welding (9)
- Inconel 718 (9)
- Lorentz force (9)
- Thick-walled steel (9)
- Weld pool shape (9)
- Advanced high strength steels (8)
- Hot cracking test (8)
- Natural convection (8)
- Welding (8)
- Additive Manufacturing (7)
- Aluminium (7)
- Electromagnetic weld pool control (7)
- Element transport (7)
- Grain refinement (7)
- Hartmann effect (7)
- Hybrid laser arc welding (7)
- Magnetohydrodynamics (7)
- Neural networks (7)
- Numerical modeling (7)
- Numerical welding simulation (7)
- Pipeline (7)
- Porosity (7)
- Residual stress (7)
- DED (6)
- Friction stir welding (6)
- Laser Metal Deposition (6)
- Liquid metal embrittlement (6)
- Residual stresses (6)
- Simulation (6)
- Temperature field (6)
- Ti-6Al-4V (6)
- Artificial neural network (5)
- Critical strain (5)
- Design of experiments (5)
- Heat conduction (5)
- High strength steels (5)
- Hybrid Laser Arc Welding (5)
- Hybrid welding (5)
- Magnetic field (5)
- Marangoni stresses (5)
- Solidification (5)
- Advanced high strength steel (4)
- Crack (4)
- Deep penetration (4)
- Deep penetration laser beam welding (4)
- Directed Energy Deposition (4)
- Directed energy deposition (4)
- Duplex stainless steel (4)
- FEA (4)
- Fatigue (4)
- Fatigue tests (4)
- Fiber laser (4)
- Hardness (4)
- High strength steel (4)
- Inverse heat conduction problem (4)
- Keyhole (4)
- Laser (4)
- Laser-hybrid welding (4)
- Marangoni flow (4)
- Optimisation (4)
- Partial penetration (4)
- Post-weld heat treatment (4)
- Quality assurance (4)
- Sensitivity analysis (4)
- Stainless Steel (4)
- Stress reduction (4)
- Tubular X-joints (4)
- Weld pool dynamics (4)
- Weldability (4)
- 9%Ni steel (3)
- AHSS (3)
- Adaptive control (3)
- Arc welding (3)
- Austenitic stainless steels (3)
- Automotive application (3)
- Automotive assembly (3)
- Automotive industry (3)
- Bulging effect (3)
- Corrosion (3)
- Cracking (3)
- Cracks (3)
- Cryogenic steel (3)
- Crystal branch development (3)
- Digital image correlation (3)
- Electromagnetic Weld Pool Support (3)
- Electron beam welding (3)
- End crater (3)
- Equivalent heat source (3)
- Experimental validation (3)
- Fatigue life (3)
- Finite element analysis (3)
- Finite element simulation (3)
- Full Penetration (3)
- Full penetration (3)
- GMAW (3)
- GTA welding (3)
- Gap (3)
- Gap bridgeability (3)
- Gaps (3)
- Grain size (3)
- Heat treatment (3)
- High energy beam welding (3)
- High-power laser (3)
- High-strength low-alloy steel (3)
- Hot crack (3)
- L-PBF (3)
- Laser energy distribution (3)
- Laser implantation (3)
- Laser scanner optics (3)
- Local reduced pressure (3)
- Longitudinal weld (3)
- MAG welding (3)
- Mathematical models (3)
- Mechanical mismatching (3)
- Mobile vacuum (3)
- Modified spray arc (3)
- Molten pool dynamics (3)
- Multi-physical modelling (3)
- Numerical modelling (3)
- Numerical process simulation (3)
- Orbital welding (3)
- Periodic solidification pattern (3)
- Phase transformation (3)
- Process chain (3)
- Process simulation (3)
- Ray tracing (3)
- Refill friction stir spot welding (3)
- Schweißsimulation (3)
- Selective Laser Melting (3)
- Simulating (3)
- Single pass welding (3)
- Spot welding (3)
- Stainless steels (3)
- Sysweld (3)
- TRIP steel (3)
- Temperature (3)
- Temperature field generation (3)
- Thermo-fluid flow (3)
- Thick Materials (3)
- Transient heat transfer (3)
- Weldbonding (3)
- Welding-induced distortion (3)
- 316L (2)
- AC weld pool support (2)
- Al Ti5B1 (2)
- Alloy 1050A (2)
- Alloy 5083 (2)
- Alloy 6082 (2)
- Aluminium alloys (2)
- Austenite stability (2)
- Automated manufacturing (2)
- Automation (2)
- Bulge effect (2)
- Bulge formation (2)
- CCT sensitivity (2)
- CTW test (2)
- Charpy impact toughness (2)
- Circumferential weld (2)
- Clad steels (2)
- Coarse-grained heat-affected zone (2)
- Columnar to equiaxed transition (CET) (2)
- Corrosion resistance (2)
- Critical strains (2)
- Data preparation (2)
- Defects (2)
- Deposition rate (2)
- Die-cast aluminum (2)
- Dimensional accuracy (2)
- Directivity (2)
- Dissimilar metal weld overlays (2)
- Dual phase steel (2)
- Duplex AISI 2205 (2)
- EBSD (2)
- EDXRD (2)
- Edge effects (2)
- Edge quality (2)
- Eigenspannungen (2)
- Electromagnetic backing (2)
- Electromagnetic influence (2)
- Electromagnetically controlled laser beam welding (2)
- Energy efficiency (2)
- Energy input (2)
- Finite element method (2)
- Fluid flow (2)
- Frequency (2)
- Fusion zone size (2)
- GMA welding (2)
- GMA-laser hybrid welding (2)
- GTAW (2)
- Gas shielded arc welding (2)
- Gas tungsten arc welding (GTAW) (2)
- Girth welding (2)
- Global optimisation (2)
- Heat flow (2)
- Heißrisse (2)
- High power (2)
- High power fibre laser (2)
- High power laser (2)
- High power welding (2)
- High-power laser beam welding (2)
- Hochfester Stahl (2)
- Hybrid components (2)
- Industrial application (2)
- Inverse modelling (2)
- Keyhole collapse (2)
- Keyhole mode welding (2)
- Kornfeinung (2)
- LME (2)
- Laser Beam Welding (2)
- Laser Powder Bed Fusion (2)
- Laser Welding (2)
- Laser arc-hybrid welding (2)
- Laser beam Welding (2)
- Laser beam weliding (2)
- Laser beams (2)
- Laser keyhole welding (2)
- Laser powder cladding (2)
- Laser-metal-deposition (2)
- Life Cycle Assessment (LCA) (2)
- Life cycle assessment (LCA) (2)
- Lightweight body shell design (2)
- Lightweight concepts (2)
- Local critical strain (2)
- Marangoni convection (2)
- Marangoni effect (2)
- Martensitbildung (2)
- Martensite kinetic (2)
- Matching ferritic welding electrode (2)
- Material flow (2)
- Melt pool dinamics (2)
- Melt pool dynamics (2)
- Mesh analysis (2)
- Metal mixing (2)
- Model prediction (2)
- Molten pool (2)
- Moving mesh (2)
- Multiple experiments (2)
- Nickel (2)
- Nickel alloys (2)
- Notch stress approach (2)
- Optical flow (2)
- Optimization (2)
- Oscillating magnetic field (2)
- Oscillating vapor plume (2)
- PBF-LB/M (2)
- Partial penetration welding (2)
- Path planning (2)
- Pores (2)
- Porosity prevention (2)
- Porosity reduction (2)
- Preheating (2)
- Process monitoring (2)
- Process reliability (2)
- RSW (2)
- Repair welding (2)
- Resource efficiency (2)
- SMAW (2)
- Seam geometry (2)
- Short calculation time (2)
- Stainless steel (2)
- Stiffness (2)
- Stochastic search method (2)
- Strain rates (2)
- Structural stress approach (2)
- Submerged arc welding (2)
- Surface structuring (2)
- Synchrotron (2)
- Tack welding (2)
- Technical crack detection (2)
- Temperature behavior (2)
- Tensile strength (2)
- Tensile tests (2)
- Testing method (2)
- Thermal analysis (2)
- Thermal cycles (2)
- Thermography (2)
- Thick plates (2)
- Time-to-solution (2)
- Titanium alloy (2)
- Transformable steels (2)
- Ultrasonic vibration (2)
- V groove (2)
- Vapor plume (2)
- Vapour plume (2)
- Volume heat source (2)
- WIG-Schweißen (2)
- Weld metal (2)
- Weld pool (2)
- Welding of aluminum (2)
- Welding of thick metal plates (2)
- Welding thermal cycle (2)
- Welding-induced residual stress (2)
- Widerstandspunktschweißen (2)
- Wire arc additive manufacturing (2)
- Zinc coated steel (2)
- 2D ray tracing (1)
- 3D FE-simulation (1)
- 3D ray tracing (1)
- 3D-FE-Simulation (1)
- 9% Ni Steel (1)
- 9%Ni steel, (1)
- AC magnetic field (1)
- AC magnetic fields (1)
- AGIL (1)
- AISI D2 (1)
- AM (1)
- AM feature integration (1)
- AZ31 magnesium alloy (1)
- Adaptive welding beam oscillation (1)
- Advanced High-Strength Steel (AHSS) (1)
- Advanced high-strength steel (1)
- Advanced high-strength steels (1)
- Al Mg Si alloys (1)
- Al/Mg alloys (1)
- AlMg0.7SiTiB filler wire (1)
- Aluminium alloy (1)
- Aluminium-Legierung 5083 (1)
- Aluminum alloy 2024-T3 (1)
- Aluminum alloys (1)
- Aluminum bronze (1)
- Analysis techniques (1)
- Analytical approach (1)
- Analytical model (1)
- Anisotropic austenitic steel (1)
- Anisotropic austenitic weld (1)
- Applicability (1)
- Arc Welding Automation (1)
- Arc sensor (1)
- Artificial Intelligence (1)
- Artificial intelligence (1)
- Austenitic (1)
- Austenitic steel (1)
- Austenitic welding electrode (1)
- Automated arc welding (1)
- Automated welding (1)
- Automobile engineering (1)
- Automobiles (1)
- Automotive (1)
- Automotive parts (1)
- Axial force (1)
- Bead-on-plate welds (1)
- Beam Welding (1)
- Beam attenuation (1)
- Beam welding (1)
- Bending test (1)
- Boundary element method (1)
- Build - up Strategy (1)
- Build direction (1)
- Build-up Orientation (1)
- Build-up strategy (1)
- Bulging (1)
- Bulging effects (1)
- Buoyancy (1)
- C-Mn steels (1)
- CFD model (1)
- CFD-model (1)
- CO2 laser (1)
- CO2 lasers (1)
- CO2- and Nd:YAG laser (1)
- CTW-Test (1)
- Calculation (1)
- Calculation time (1)
- Carbon Steels (1)
- Carbon dioxide footprint (1)
- Carbon steels (1)
- Cavities (1)
- Charpy V-notch tests (1)
- Cimensional Accuracy (1)
- Circumferential welds (1)
- Cladding parameter (1)
- Clustering (1)
- Coarse grained heat affected zone (1)
- Cold Cracking Test (1)
- Columnar crystal growth (1)
- Combined laser manufacturing (1)
- Combined processes (1)
- Computer vision (1)
- Condition monitoring (1)
- Contact element (1)
- Continuous cooling transformation behaviour (1)
- Continuous cooling transformation diagrams (1)
- Control magnetic field (1)
- Controlled tensile weldability test (1)
- Conventional Ni-based austenitic welding electrode (1)
- Convolutional neural network (1)
- Crack growth (1)
- Cracking susceptibility (1)
- Cracking susceptibility of AHSS (1)
- Cracks in the HAZ (1)
- Crash behaviour (1)
- Crater (1)
- Critical strain rate (1)
- Cryogenic Steel (1)
- DED-EB (1)
- DIC (1)
- DIC technique (1)
- DIP transfer (1)
- Damage prediction (1)
- Deep learning (1)
- Deformation (1)
- Deformation behaviour (1)
- Deformed geometry (1)
- Dendrite growth (1)
- Density measurement (1)
- Deposition welding (1)
- Die-casted aluminum (1)
- Different welding position (1)
- Digital Image Correlation (1)
- Digital factory (1)
- Digitalization (1)
- Direct Energy Deposition (1)
- Direct Laser Metal Deposition (1)
- Direct energy deposition (1)
- Discontinuities (1)
- Dissimilar joints (1)
- Dissimilar welding (1)
- Distortion simulation (1)
- Drive pinion (1)
- Drop out of bead (1)
- Duplex (1)
- Duplex nucleation theory (1)
- Duplex stainless steels (1)
- Duplex steels (1)
- Dynamic fracture tests (1)
- EBAM (1)
- Economic wide technology replacement (1)
- Efficient modelling (1)
- Einspannung (1)
- Electro-thermomechnical model (1)
- Electrode geometry (1)
- Electromagnetic (1)
- Electromagnetic Force (1)
- Electromagnetic rectification (1)
- Electromagnetic stirring (1)
- Electromagnetic support (1)
- Electromagnetic supported degassing (1)
- Electromagnetic weld control (1)
- Electromagnetic weld pool support system (1)
- Electromagnetic weld support system (1)
- Embedded electronics (1)
- End-crater (1)
- Energy density distribution (1)
- Energy dispersive synchrotron X-ray diffraction (1)
- Energy parameters of the arc (1)
- Environment (1)
- Environmental impact categories (1)
- Epitaxial nucleation (1)
- Equivalent volumetric heat source (1)
- Ermüdung (1)
- Execution (1)
- Experimental determination (1)
- Externally loaded hot cracking test (1)
- Externally loaded test (1)
- FE simulation (1)
- FE-model (1)
- FEM (1)
- FEM study (1)
- Fair salary (1)
- Fast calculation (1)
- Fatigue loading (1)
- Fatigue strength (1)
- FeMn-steels (1)
- Ferritic welding electrode (1)
- Ferromagnetic steel (1)
- Ferromagnetic steels (1)
- Ferrous metals and alloys (1)
- Fibre laser (1)
- Fibre lasers (1)
- Fibre-optic lasers (1)
- Filler material distribution (1)
- Filler wire (1)
- Filler wire mixing (1)
- Fillet welds (1)
- Fine-grained Steel (1)
- Finite Element Method (1)
- Finite element method (FEM) (1)
- Finite elements analysis (1)
- Flange width (1)
- Flow (1)
- Flow pattern (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Fracture (1)
- Fracture behaviour (1)
- Fresnel reflection (1)
- Friction spot welding (1)
- Friction welding (1)
- Full penetration laser welding (1)
- Full penetration welding (1)
- Functional analysis (1)
- Functional-analytical solution (1)
- Fusion zone (1)
- Fusion zone profile (1)
- Fusion zone, nickel alloys (1)
- GMA surfacing (1)
- Galvanized steel (1)
- Gap bridging (1)
- Gap compensation (1)
- General analytical solutions (1)
- Gleeble experiments (1)
- Gleeble testing (1)
- Grade S960QL steel (1)
- Grain structure (1)
- Greenhouse gas mitigation (1)
- Greens function method (1)
- HAZ crack (1)
- HSLA (1)
- Hardly separable problem (1)
- Heat Input (1)
- Heat Treatment (1)
- Heat generation (1)
- Heat input (1)
- Heat source calibration (1)
- Heat source configuration (1)
- Heat source models (1)
- Heat transfer (1)
- Heat treatments (1)
- High Power Fibre Laser (1)
- High brightness (1)
- High power fiber laser (1)
- High power laser keyhole welding (1)
- High process speeds (1)
- High speed laser cladding (1)
- High-Power Welding (1)
- High-power Laserbeam Welding (1)
- High-power fibre laser (1)
- High-power laser beam (1)
- High-pressure pipelines (1)
- High-strength fine-grained steels (1)
- High-strength steel sheets (1)
- Higher manganese content (1)
- Highspeed-plasma-laser-cladding (1)
- Hold time (1)
- Hot Cracks (1)
- Human health (1)
- Human health G. (1)
- Hybrid Laser arc Welding (1)
- Hybrid Laser-Arc Welding (1)
- Hybrid Part (1)
- Hybrid Welding (1)
- Hybrid bonding (1)
- Hybrid-laser-arc welding (1)
- Hydrostatic and arc pressure exceed the Laplace pressure (1)
- Hydrostatic force compensation (1)
- Imaging (1)
- Impact Absorbed Energy (1)
- Impact absorbed energy (1)
- In situ strain (1)
- In-situ synchrotron diffraction (1)
- Inconel 625 (1)
- Inconel 939 (1)
- Industrial Parts (1)
- Industrial and Manufacturing Engineering (1)
- Industrial parts (1)
- Initial gap (1)
- Instrumented restrained cracking test (1)
- Instrumentierte Eindringprüfung (1)
- Instumented indentation test (1)
- Integrated alignment features (1)
- Intensity of Restraint (1)
- Investigated materials (1)
- Jacket Support Structures (1)
- Joint-site structure (1)
- Keyhole mode laser beam welding (1)
- Keyhole stability (1)
- LBW (1)
- LCA (1)
- LMD (1)
- LW (1)
- Lamé curves (1)
- Lamé curves approximation (1)
- Laser Metal Deposition (LMD) (1)
- Laser Metal Deposition; Laser Beam Welding; Duplex; Stainless Steel (1)
- Laser and electron beam welding (1)
- Laser beam welding under vacuum/reduced pressure (1)
- Laser beam wlding (1)
- Laser cladding (1)
- Laser cutting (1)
- Laser dispersing (1)
- Laser melting (1)
- Laser metal deposition (LMD) (1)
- Laser metal fusion (1)
- Laser powder bed fusion (1)
- Laser powder-based directed energy deposition (1)
- Laser surfacing (1)
- Laser-Hybrid Welding (1)
- Laser-beam welding, (1)
- Laser-plasma hybrid (1)
- Laserstrahlschweißen (1)
- Life cycle assessment (1)
- Life-cycle assessment (1)
- Lifetime (1)
- Lightweight Design (1)
- Lightweight design (1)
- Lightweight principles (1)
- Liquation Cracking (1)
- Liquid Metal Embrittlement (1)
- Liquid Metal Embrittlement (LME) (1)
- Local fatigue approaches (1)
- Local fatigue spproaches (1)
- Lokale Spannungs-Dehnungskurven (1)
- Low Temperature Toughness (1)
- Low alloy steels (1)
- Low feed rates (1)
- Low heat input GMA welding (1)
- Low heat input Gma welding (1)
- Low transformation temperature (LTT) alloy (1)
- Low transformation temperature filler material (1)
- MHD (1)
- MIG welding (1)
- MRO (1)
- Macro Processing (Joining, Welding) (1)
- Macro processing (1)
- Magnesium (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetic bath support (1)
- Maintenance (1)
- Manganese (1)
- Manganese alloyed stainless steels (1)
- Maritime Components (1)
- Maritime industry (1)
- Martensite start temperature (1)
- Martensite transformation (1)
- Martensitic transformation (1)
- Matching ferritic filler metal (1)
- Material modeling (1)
- Material ranking (1)
- Mathematical modeling (1)
- Measurement (1)
- Mechanical Properties (1)
- Mechanical properties of joints (1)
- Mechanical properties of the joints (1)
- Mechanical property (1)
- Mechanical strength (1)
- Mechanical-technological properties (1)
- Metal forming tools (1)
- Metallic vapour plume (1)
- Microcracking (1)
- Microstructure Tensile strength (1)
- Misalignment of edges (1)
- Misalignment of the edges (1)
- Model calibration (1)
- Model order reduction (1)
- Modeling (1)
- Modeling approach (1)
- Modeling of fluid flow (1)
- Modified varestraint transvarestraint (MVT) hot cracking test (1)
- Molten pool behaviour (1)
- Monitoring systems (1)
- Multi - physical modeling (1)
- Multi pass welding (1)
- Multi-attribute decision method (1)
- Multi-criteria decision support (1)
- Multi-materials joining (1)
- Multi-pass welding (1)
- Multi-physical modeling (1)
- Multi-regional inputeoutput data (1)
- Multiple reflections (1)
- Multirun welding (1)
- Narrow gap welding (1)
- Narrow-gap welding (1)
- Neural Networks (1)
- Neural network (1)
- Ni-based austenitic filler metal (1)
- Ni-based austenitic welding electrode (1)
- Ni-based superalloy (1)
- NiCrBSi (1)
- Nickel-based superalloy (1)
- Non-destructive testing (1)
- Novel metrology (1)
- Novel optical measurement (1)
- Numerical Simulation (1)
- Numerical Welding Simulation (1)
- Numerical analysis (1)
- Numerical approach (1)
- Numerical simulations (1)
- Numerical welding simulations (1)
- Offshore Wind (1)
- Offshore wind turbines (1)
- Open science (1)
- Open source (1)
- Optical measurement (1)
- Optical measurement technique (1)
- Optical measuring technique (1)
- Optical measurment technique (1)
- Orbital process (1)
- Ortsaufgelöst (1)
- PBF/LB-M (1)
- Particles (1)
- Pearlitic microstructure (1)
- Penetration depth (1)
- Phase field method (1)
- Pin profile (1)
- Pipe Welding (1)
- Pipe laying (1)
- Pipe manufacturing (1)
- Pipe weld preparation (1)
- Pipe welding (1)
- Pipeline construction (1)
- Pipeline steel X120 (1)
- Pipeline steel of grade X120 (1)
- Plasma (1)
- Plasma cutting (1)
- Plasma-Transferred-Arc (1)
- Plasma-cut samples (1)
- Plasma-cutting (1)
- Plasma-transferred-arc (1)
- Plastic deformation (1)
- Plume (1)
- Plume heating (1)
- Pointwise constraints (1)
- Position welding (1)
- Post-welding heat treatment (1)
- Powder Analysis (1)
- Pre-weld Preparation (1)
- Precipitation hardening aluminum alloys (1)
- Preheatin (1)
- Prior austenite grain size (1)
- Process diagnostics and simulation (1)
- Process innovations (1)
- Process monitoring and control (1)
- Process procedures (1)
- Process stability (1)
- Proper generalized decomposition (1)
- Pulsed laser beam welding (1)
- Punktschweißkleben (1)
- Punktschweißverbindung (1)
- Quality monitoring (1)
- Rail tracks (1)
- Ray teacing (1)
- Ray-tracing (1)
- Ray-tracing methods (1)
- Recycling (1)
- Reference lists (1)
- Repair and overhaul (1)
- Research data management (1)
- Resistance Spot Welding (RSW) (1)
- Resistance welding (1)
- Result display (1)
- Retained austenite (1)
- Robots (1)
- Root dropping (1)
- SEM (1)
- SEP-1220-3 (1)
- SLM (1)
- SLM printed plasma torch (1)
- Schweißeignung (1)
- Schweißen (1)
- Secondary heat source (1)
- Selektive-laser-melting (1)
- Self-restraint hot cracking (1)
- Self-restraint test (1)
- Sensitivität (1)
- Sensitivitätsanalyse (1)
- Sensivitätsanalyse (1)
- Sensor (1)
- Sensors (1)
- Shear strength (1)
- Sheet (1)
- Shielding atmosphere (1)
- Shielding gas (1)
- Shielding gases (1)
- Ship building (1)
- Shipbuilding (1)
- Shipbuilding steel (1)
- Shrinkage (1)
- Similar and dissimilar material spot weld (1)
- Simufact.welding (1)
- Single-pass welding (1)
- Social Life Cycle Assessment (SLCA) (1)
- Social life cycle assessment (SLCA) (1)
- Software (1)
- Solidification behaviour (1)
- Solidification crack (1)
- Solidification craking (1)
- Stainless austenitic and duplex steels (1)
- Standardization (1)
- Steady-state weld pool (1)
- Steel (1)
- Steel and Al (1)
- Steels (1)
- Strain field (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Strain rate (1)
- Strain-rate (1)
- Stress-strain behavior (1)
- Super martensitic filler material (1)
- Superalloy (1)
- Superelliptic Lamé curves (1)
- Support structures (1)
- Surface cracks (1)
- Surface roughness (1)
- Surface texturing (1)
- Susceptibility to cracking (1)
- Sustainability assessment (1)
- System technology (1)
- TIG welding (1)
- TRIP (1)
- TRIP - transformation induced plasticity (1)
- Tandem Gas Metal Arc Welding (1)
- Tandem gas metal arc welding (1)
- Tandem welding (1)
- Temperature Field Generation (1)
- Temperature distribution (1)
- Tensile Strength (1)
- Tensile performance (1)
- Tensile properties (1)
- Tensile resistance spot welding experiment (1)
- Tensileshear (1)
- Test method (1)
- Texture (1)
- Thermal energy generation (1)
- Thermal softening (1)
- Thermo physical simulation (1)
- Thermo-capillary convection (1)
- Thermo-fluid dynamics (1)
- Thermomechanical material properties (1)
- Thermophysical material properties (1)
- Thick materials (1)
- Thick metal plate welding (1)
- Thick plate (1)
- Thick plate welding (1)
- Thick walled parts (1)
- Thick-Walled Steel (1)
- Thick-plate welding (1)
- Thick-walled Structures (1)
- Ti - 6Al - 4V (1)
- Ti-6Al-4 V (1)
- Ti3Al2.5V (1)
- TiB2 (1)
- Tick plates (1)
- Tool torque (1)
- Torsion (1)
- Toughness (1)
- Transformation induced plasticity (1)
- Transformation induced plasticity (TRIP) (1)
- Transformation-induced plasticity (TRIP) (1)
- Traverse force (1)
- Tube welding (1)
- Tungsten carbide (1)
- Turbine blade (1)
- Turbine components (1)
- Turbine industry (1)
- Turbulence (1)
- Two-dimensional solidification (1)
- Two-run welding technique (1)
- Ultrasonic C-scan image (1)
- Ultrasonic field (1)
- Ultrasonic non-destructive evaluation (1)
- Unalloyed steels (1)
- V-notch impact toughness (1)
- Vacuum (1)
- Vapor recondensation (1)
- Vaporization (1)
- Variables influencing hot cracking (1)
- Vehicle bodies (1)
- Verzug (1)
- Viscoplasticity (1)
- Volumetric heat source (1)
- Wear resistance (1)
- Weld cracks (1)
- Weld defects (1)
- Weld end crater (1)
- Weld imperfections (1)
- Weld microstructure (1)
- Weld plan modification (1)
- Weld pool behavior (1)
- Weld pool geometry (1)
- Weld pool modeling (1)
- Weld pool shape approximation (1)
- Weld pool stabilization (1)
- Weld pool support (1)
- Weld root (1)
- Weld specimens (1)
- Weldbonded joint behaviour (1)
- Weldbonded joints (1)
- Weldbonding process reliability (1)
- Welding Current (1)
- Welding Simulation (1)
- Welding costs (1)
- Welding cracks (1)
- Welding distortion (1)
- Welding distortions (1)
- Welding jig (1)
- Welding of AlMg3 (1)
- Welding parameter (1)
- Welding process selection (1)
- Welding process simulation (1)
- Welding residual stress (1)
- Welding residual stresses (1)
- Welding under external loading (1)
- Weldx (1)
- Werkstoffe (1)
- Wineglass shape (1)
- Wire electron beam additive manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- Work-flow (1)
- Wärmequellenkonfiguration (1)
- X-ray computer tomography (1)
- X8Ni9 (1)
- YAG lasers (1)
- Zinc (1)
- Zink (1)
- cryogenic steel (1)
- deposition welding (1)
- digital image correlation (1)
- dual phase steel (1)
- hardness (1)
- highspeed plasma laser cladding (1)
- laser energy distribution (1)
- laser hybrid welding (1)
- laser welding (1)
- microstructure (1)
- resistance spot welding (1)
- sensitivity analysis (1)
- tensile strength (1)
- thermal cycles (1)
- thick plate welding (1)
- welding residual stresses (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (182)
- 9.3 Schweißtechnische Fertigungsverfahren (177)
- 9.6 Additive Fertigung metallischer Komponenten (3)
- 5 Werkstofftechnik (2)
- 5.2 Metallische Hochtemperaturwerkstoffe (2)
- 7 Bauwerkssicherheit (2)
- 7.7 Modellierung und Simulation (2)
- 9.0 Abteilungsleitung und andere (2)
- 5.5 Materialmodellierung (1)
Eingeladener Vortrag
- nein (25)
Laser metal deposition is described with its applications for additive manufacturing. The necessary process chain is discussed, with regard to weld bead dimensions and 3D build-up strategy. Metallurgical cross sections, x-ray and tensile tests are conducted. As demonstrative components, a gas turbine burner and a turbine blade are shown.
Laser metal deposition (LMD) is an established technology for two-dimensional surface coatings. It offers high deposition rates, high material flexibility, and the possibility to deposit material on existing components. Due to these features, LMD has been increasingly applied for additive manufacturing of 3D structures in recent years. Compared to previous coating applications, additive manufacturing of 3D structures leads to new challenges regarding LMD process knowledge. In this paper, the process steps for LMD as additive manufacturing technology are described. The experiments are conducted using titanium alloy Ti-6Al-4Vand Inconel 718. Only the LMD nozzle is used to create a shielding gas atmosphere. This ensures the high geometric flexibility needed for additive manufacturing, although issues with the restricted size and quality of the shielding gas atmosphere arise. In the first step, the influence of process parameters on the geometric dimensions of single weld beads is analyzed based on design of experiments. In the second step, a 3D build-up strategy for cylindrical specimen with high dimensional accuracy is described. Process parameters, travel paths, and cooling periods between layers are adjusted. Tensile tests show that mechanical properties in the as-deposited condition are close to wrought material. As practical example, the fir-tree root profile of a turbine blade is manufactured. The feasibility of LMD as additive technology is evaluated based on this component.
A fundamental study of physical mechanisms of wineglass-shaped fusion zone profile in laser melting
(2024)
The fusion zone geometry in laser melting processes e.g., laser welding and laser-based additive manufacturing, of metallic materials has commonly a wineglass-shaped profile which is critical to the grain orientation and stress distribution. Hereby, we adopt for the first time a decoupling work through a combination of multi-physics modelling and experiments to reveal the fundamental mechanisms of this special morphology. Two physicsbased easy-to-use metal vapour models are proposed to consider the vapour’s momentum and thermal effects separately. It is found that the direct laser energy absorption and Marangoni shear stress which are widely hypothesised to dominate the wineglass-shape formation show only a minor influence. The additional heating from the metallic vapour plume rather than its momentum impact contributes predominantly to the enlarging of the molten pool top region, resulting directly in the formation of the wineglass-shaped fusion zone. The generality of the plume heating effect is also validated in two types of materials (steel and Al) in a wide range of parameters.
A technique for calculating the main solidification parameters for a two-dimensional columnar crystal growth during complete penetration laser beam welding of thin steel sheets was developed. Given that the weld pool interface is described by Lamé curves (superellipses) within the horizontal plane of growth, general analytical solutions were derived for the geometry of the crystal axis and the corresponding growth rate and cross-sectional area of the crystal. A dimensionless analysis was performed to provide insights on the dependence of the solidification parameters on the shape and dimensions of the rear part of the weld pool boundary. The derived solutions were applied for the case of complete penetration laser beam keyhole welding of 2 mm thick 316L austenitic chromium-nickel steel sheets. It was shown that the reconstruction of the weld pool boundary with Lamé curves provides higher accuracy and flexibility compared to results obtained with elliptical functions. The validity of the proposed technique and the derived analytical solutions was backed up by a comparison of the obtained solutions to known analytical solutions and experimentally determined shapes and sizes of the crystals on the top surface of the sheet. The dimensions of the calculated crystal axis correlated well with the experimentally obtained results.
This work aims to find the thermal cycles during and after fusion welding through simulation by first calculating the resulting local temperature field in the quasi-stationary part of the process. Here complete-penetration keyhole laser beam welding with a laser power of 18 kW on a 15 mm thick slab of a low-alloyed steel at a welding speed of 2 m/min is considered. In order to physically depict the laser material interaction a multi-physics numerical model including the effects of phase transformation, thermo-capillary convection, natural convection and temperature-dependent material properties up to evaporation temperature is developed. It uses a fixed keyhole geometry with a right truncated circular cone shape to introduce the laser beam energy to the workpiece. In a subsequent study, the resulting local temperature field is then used as an equivalent heat source in order to predict the unsteady thermal cycle during and after fusion welding. The translational movement of the laser beam through the workpiece is represented by a moving mesh approach. For the simulation, stationary heat transfer and fluid dynamics are described by a system of strongly coupled partial differential equations. These are solved with the commercial finite element software COMSOL Multiphysics 5.0. The results of the numerical simulation are validated by experiments, where the weld bead shapes and the thermal cycles show good correlation.
The weld quality and the possible defect formation are directly determined by the weld pool shape and the thermo-fluid dynamics therein. In this paper, an untypical weld pool profile, i.e., elongated at its top and bottom but narrowed at the middle, is found experimentally and numerically in the wire feed laser beam welding. The detrimental influence of the weld pool narrowing on the element transport is analyzed and discussed. A magnetohydrodynamic technique is utilized to suppress the narrowing, aiming at a more homogenous element distribution. It is found that a low-temperature region is formed in the middle of the weld pool due to the interaction of the two dominant circulations from the top and bottom regions. The weld pool is significantly narrowed due to the untypical growth of the mushy zone in the low-temperature region, which results in a direct blocking effect on the downward flow and the premature solidification in the middle region. The Lorentz force produced by a transverse oscillating magnetic field shows the potential to change the flow pattern into a single-circulation type and the low-temperature-gradient region is mitigated.
Therefore, the downward transfer channel is widened, and its premature solidification is prevented. The numerical results are well validated by experimental measurements of metal/glass observation and X-ray fluorescence element mapping.
In this contribution, we present a physically motivated heat source model for the numerical modeling of laser beam welding processes. Since the calibration of existing heat source models, such as the conic or Goldak model, is difficult, the representation of the heat source using so-called Lamé curves has been established, relying on prior Computational Fluid Dynamics (CFD) simulations.
Lamé curves, which describe the melting isotherm, are used in a subsequent finite-element (FE) simulation to define a moving Dirichlet boundary condition, which prescribes a constant temperature in the melt pool. As an alternative to this approach, we developed a physically motivated heat source model, which prescribes the heat input as a body load directly. The new model also relies on prior CFD simulations to identify the melting isotherm. We demonstrate numerical results of the new heat source model on boundary-value problems from the field of laser beam welding and compare it with the prior CFD simulation and the results of the Lamé curve model and experimental data.
The present research work aims at clarification of the effect of the welding electrode type on the mechanical properties of SMA welded joints of 9%Ni steel plates. Properties of produced SMA welded joints were evaluated using different non-destructive and destructive investigation methods. In comparison with the conventionally used Ni-based welding electrode ENiCrMo-3 (AWS A5.11), an experimentally produced non-conventional ferritic welding electrode with 11%Ni (ENi11-Company specification) has resulted in a better combination of the mechanical properties of SMA welded joints of this steel type for critical cryogenic applications. Besides, a positive economic impact for the experimentally produced non-conventional ferritic welding electrode, due to its lower cost, could be another attractive aspect.
The additional element from the filler wire in the laser beam welding is usually distributed inhomogeneously in the final weld due to the high solidification rate of weld pool. It has been found that the electromagnetic stirring produced by an external oscillating magnetic field can enhance the material mixing in the weld pool to achieve a more uniform element distribution. However, the magnetic field has a highly non-linear and multi-coupled interaction with the weld pool behavior, which makes the quantitative explanation of the physical mechanism difficult. In this study, the effect of electromagnetic stirring on the transport phenomena in the wire feed laser beam welding is investigated by a numerical modelling. A 3D transient multi-physical model considering the magnetohydrodynamics, heat transfer, fluid flow, keyhole dynamics and element transport is developed. The multiple reflections and the Fresnel absorption of the laser on the keyhole wall are calculated using the ray tracing method. The numerical results show that a Lorentz force produced by the oscillating magnetic field and its induced eddy current gives significant influence on the transport phenomena in the molten pool. The forward and downward flow is enhanced by the electromagnetic stirring, which homogenizes the distribution of the additional elements from a nickel-based filler wire in a steel weld pool. The numerical results show a good agreement with the high-speed images of the molten pool, the fusion line from the optical micrograph and the element distribution from the energy dispersive X-ray spectroscopy. This work provides a physical base for the electromagnetic-controlled laser beam welding and some guidance for the selection of electromagnetic parameters.
The additional element from the filler wire in the laser beam welding is usually distributed inhomogeneously in the final weld due to the high solidification rate of weld pool. It has been found that the electromagnetic stirring produced by an external oscillating magnetic field can enhance the material mixing in the weld pool to achieve a more uniform element distribution. However, the magnetic field has a highly non-linear and multi-coupled interaction with the weld pool behavior, which makes the quantitative explanation of the physical mechanism difficult. In this study, the effect of electromagnetic stirring on the transport phenomena in the wire feed laser beam welding is investigated by a numerical modelling. A 3D transient multi-physical model considering the magnetohydrodynamics, heat transfer, fluid flow, keyhole dynamics and element transport is developed. The multiple reflections and the Fresnel absorption of the laser on the keyhole wall are calculated using the ray tracing method. The numerical results show that a Lorentz force produced by the oscillating magnetic field and its induced eddy current gives significant influence on the transport phenomena in the molten pool. The forward and downward flow is enhanced by the electromagnetic stirring, which homogenizes the distribution of the additional elements from a nickel-based filler wire in a steel weld pool. The numerical results show a good agreement with the high-speed images of the molten pool, the fusion line from the optical micrograph and the element distribution from the energy dispersive X-ray spectroscopy. This work provides a physical base for the electromagnetic-controlled laser beam welding and some guidance for the selection of electromagnetic parameters.
A multi-physics numerical model was developed to investigate the influence of a steady magnetic field aligned perpendicular to the welding direction during partial penetration high power laser beam welding of aluminium in downhand position. Three-dimensional heat transfer, fluid dynamics including phase transition and electromagnetic field partial differential equations were successfully solved with the finite element differential equation solver COMSOL Multiphysics 4.2. The implemented material model used temperature-dependent properties up to evaporation temperature. Marangoni convection in the surface region of the weld pool, natural convection due to the gravitational field and latent heat of solidliquid phase transition were taken into account. Solidification was modelled by the CarmanKozeny equation for porous media morphology. The flow pattern in the melt as well as the weld bead geometry were significantly changed by the induced Lorentz force distribution in the liquid metal. It reveals that the application of a steady magnetic field to laser beam welding with corresponding Hartmann numbers Ha2 ≈ 104 allows for a suppression of the characteristic wineglass-shape of the weld cross section caused by thermocapillary flow. The numerical results are in good agreement with experimental results obtained with welding of AlMg3 with a 16 kW disc laser. The steady magnetic field was delivered by permanent magnets mounted on both lateral sides of the weld specimen. The maximum magnetic flux density was around 500 mT. It shows, that the applied magnetic field has a predominant dissipating effect on the weld pool dynamics independently of its polarity.
In this study, a three-dimensional CFD-simulation model was developed to simulate the fluid flow in the weld pool. The CFD-model showed a bulging region in the middle of the depth, which is separated from the top surface and bottom surface by two narrowing regions. It can be concluded that the interaction of the movement of the laser source with the Marangoni vortex leads to a teardrop shape at the upper and bottom surface of the workpiece. Additionally, it shows that the bulging in the weld is a result of the backflows on the upper and lower sides due to the thermo-capillary-driven flows. The weld pool shape was used as a heat source in a two-dimensional thermomechanical model, which allows a highly accurate transformation of the weld pool dimensions obtained from the CFD model. This developed technique allows the consideration of physical aspects, which cannot be considered when using traditional heat sources. The mechanical model has shown that the chronological order of the solidification of the weld has a significant influence on the nature and distribution of the stresses in the weld. High tensile stress has been observed in the bulging region, i.e. in the susceptible region for solidification cracking, when compared to the other narrowing regions, which show compressive stress.
Selective Laser Melting (SLM) and Laser Metal Deposition (LMD) are prominent methods in the field of additive manufacturing technology. While the powder-bed based SLM allows the manufacturing of complex structures, buildrate and part volumes are limited. In contrast, LMD is able to operate with high deposition rates on existing parts, however shape complexity is limited. Utilizing their respective strengths, a combination of these two additive technologies has the potential to produce complex parts with high deposition rates.
In this paper, a process chain consisting of additive technologies SLM and LMD is described. The experiments are conducted using the alloys Ti-6Al-4V and Inconel 718. A cylindrical test specimen is produced and the microstructure along the SLM-LMD zone is described. In addition, this process chain was tested in the manufacturing of a turbine blade. The feasibility of implementing this process chain for small batch production is discussed. The results are evaluated to show advantages and limitations of the SLM-LMD process chain. This paper is relevant for industrial or scientific users of additive manufacturing technologies, who are interested in the feasibility of a SLM-LMD process chain and its potential for increased deposition rates.
Additive manufacturing promises a high potential for the maritime sector. Directed Energy Deposition (DED) in particular offers the opportunity to produce large-volume maritime components like propeller hubs or blades without the need of a costly casting process. The post processing of such components usually generates a large amount of aluminum bronze grinding waste. The aim of the presented project is to develop a sustainable circular AM process chain for maritime components by recycling aluminum bronze grinding waste to be used as raw material to manufacture ship Propellers with a laser-powder DED process. In the present paper, grinding waste is investigated using a dynamic image Analysis system and compared to commercial DED powder. To be able to compare the material quality and to verify DED process parameters, semi-academic sample geometries are manufactured.
Hybrid laser-arc welding (HLAW) was applied for butt welding of 14.5 mm thick plates of ferritic cryogenic steel X8Ni9 containing 9% Ni, which is used for manufacturing storage and transport facilities of liquefied natural gas (LNG). The weld seam formation and the achievable metallurgical and mechanical properties of the hybrid welds were investigated experimentally for two types of filler wire, an austenitic wire dissimilar to the base metal (BM) and an experimentally produced matching ferritic wire. Safe penetration and uniform distribution of the austenitic filler metal in the narrow hybrid weld could only be achieved in the upper, arcdominated part of the weld. The pronounced heterogeneous distribution of the austenitic filler metal in the middle part and in the root area of the weld could not ensure sufficient notched impact toughness of the weld metal (WM). As a result, a decrease in the impact energy down to 17±3 J was observed, which is below the acceptance level of ≥34 J for cryogenic applications. In contrast, the use of a matching ferritic filler wire resulted in satisfactory impact energy of the hybrid welds of up to 134±52 J at the concerned cryogenic temperature of -196 °C. The obtained results contribute to an important and remarkable conversion in automated manufacturing of LNG facilities. In other words, the results will help to develop a new laser-based welding technology, where both quality and productivity are considered.The efficiency of the developed welding process has been demonstrated by manufacturing a prototype where a segment of the inner wall of large size LNG storage tank was constructed. In this concern, hybrid laser arc welding was conducted in both horizontal (2G) and vertical (3G) positions as a simulation to the actual onsite manufacturing. The prototype was fabricated twice where its quality was confirmed based on non-destructive and destructive examinations.
The sound numerical prediction of welding-induced thermal stresses, residual stresses, and distortions strongly depends on the accurate description of a welded material’s thermomechanical deformation behaviour. In this work, we provide experimental data on the viscoplastic deformation behaviour of a grade-s960ql steel up to a temperature of 1000 ◦C. In addition, a multi-phase viscoplastic material model is proposed, which accounts for the experimentally observed isothermal deformation behaviour of grade-s960ql steel base and austenitised material, as well as for athermal contributions that originate from solid-state phase transformations. The multi-phase viscoplastic and a classic rateindependent isotropic hardening material model were applied in the numerical simulations of both-ends-fixed bar Satoh tests and a single-pass gas metal arc weld. The influence of material modelling choices on the agreement between numerical simulation and experimental results is discussed, and recommendations for further work are given.