Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (420) (entfernen)
Schlagworte
- Laser beam welding (94)
- Welding simulation (26)
- Resistance spot welding (22)
- Solidification cracking (21)
- Laser metal deposition (20)
- Additive manufacturing (19)
- Microstructure (16)
- Numerical simulation (16)
- Mechanical properties (15)
- Laser welding (14)
- Electromagnetic weld pool support (13)
- Distortion (10)
- High power laser beam welding (10)
- Laser hybrid welding (10)
- Gas metal arc welding (9)
- Hot cracking (9)
- Hybrid laser-arc welding (9)
- Inconel 718 (9)
- Lorentz force (9)
- Thick-walled steel (9)
- Weld pool shape (9)
- Advanced high strength steels (8)
- Hot cracking test (8)
- Natural convection (8)
- Welding (8)
- Additive Manufacturing (7)
- Aluminium (7)
- Electromagnetic weld pool control (7)
- Element transport (7)
- Grain refinement (7)
- Hartmann effect (7)
- Hybrid laser arc welding (7)
- Magnetohydrodynamics (7)
- Neural networks (7)
- Numerical modeling (7)
- Numerical welding simulation (7)
- Pipeline (7)
- Porosity (7)
- Residual stress (7)
- DED (6)
- Friction stir welding (6)
- Laser Metal Deposition (6)
- Liquid metal embrittlement (6)
- Residual stresses (6)
- Simulation (6)
- Temperature field (6)
- Ti-6Al-4V (6)
- Artificial neural network (5)
- Critical strain (5)
- Design of experiments (5)
- Heat conduction (5)
- High strength steels (5)
- Hybrid Laser Arc Welding (5)
- Hybrid welding (5)
- Magnetic field (5)
- Marangoni stresses (5)
- Solidification (5)
- Advanced high strength steel (4)
- Crack (4)
- Deep penetration (4)
- Deep penetration laser beam welding (4)
- Directed Energy Deposition (4)
- Directed energy deposition (4)
- Duplex stainless steel (4)
- FEA (4)
- Fatigue (4)
- Fatigue tests (4)
- Fiber laser (4)
- Hardness (4)
- High strength steel (4)
- Inverse heat conduction problem (4)
- Keyhole (4)
- Laser (4)
- Laser-hybrid welding (4)
- Marangoni flow (4)
- Optimisation (4)
- Partial penetration (4)
- Post-weld heat treatment (4)
- Quality assurance (4)
- Sensitivity analysis (4)
- Stainless Steel (4)
- Stress reduction (4)
- Tubular X-joints (4)
- Weld pool dynamics (4)
- Weldability (4)
- 9%Ni steel (3)
- AHSS (3)
- Adaptive control (3)
- Arc welding (3)
- Austenitic stainless steels (3)
- Automotive application (3)
- Automotive assembly (3)
- Automotive industry (3)
- Bulging effect (3)
- Corrosion (3)
- Cracking (3)
- Cracks (3)
- Cryogenic steel (3)
- Crystal branch development (3)
- Digital image correlation (3)
- Electromagnetic Weld Pool Support (3)
- Electron beam welding (3)
- End crater (3)
- Equivalent heat source (3)
- Experimental validation (3)
- Fatigue life (3)
- Finite element analysis (3)
- Finite element simulation (3)
- Full Penetration (3)
- Full penetration (3)
- GMAW (3)
- GTA welding (3)
- Gap (3)
- Gap bridgeability (3)
- Gaps (3)
- Grain size (3)
- Heat treatment (3)
- High energy beam welding (3)
- High-power laser (3)
- High-strength low-alloy steel (3)
- Hot crack (3)
- L-PBF (3)
- Laser energy distribution (3)
- Laser implantation (3)
- Laser scanner optics (3)
- Local reduced pressure (3)
- Longitudinal weld (3)
- MAG welding (3)
- Mathematical models (3)
- Mechanical mismatching (3)
- Mobile vacuum (3)
- Modified spray arc (3)
- Molten pool dynamics (3)
- Multi-physical modelling (3)
- Numerical modelling (3)
- Numerical process simulation (3)
- Orbital welding (3)
- Periodic solidification pattern (3)
- Phase transformation (3)
- Process chain (3)
- Process simulation (3)
- Ray tracing (3)
- Refill friction stir spot welding (3)
- Schweißsimulation (3)
- Selective Laser Melting (3)
- Simulating (3)
- Single pass welding (3)
- Spot welding (3)
- Stainless steels (3)
- Sysweld (3)
- TRIP steel (3)
- Temperature (3)
- Temperature field generation (3)
- Thermo-fluid flow (3)
- Thick Materials (3)
- Transient heat transfer (3)
- Weldbonding (3)
- Welding-induced distortion (3)
- 316L (2)
- AC weld pool support (2)
- Al Ti5B1 (2)
- Alloy 1050A (2)
- Alloy 5083 (2)
- Alloy 6082 (2)
- Aluminium alloys (2)
- Austenite stability (2)
- Automated manufacturing (2)
- Automation (2)
- Bulge effect (2)
- Bulge formation (2)
- CCT sensitivity (2)
- CTW test (2)
- Charpy impact toughness (2)
- Circumferential weld (2)
- Clad steels (2)
- Coarse-grained heat-affected zone (2)
- Columnar to equiaxed transition (CET) (2)
- Corrosion resistance (2)
- Critical strains (2)
- Data preparation (2)
- Defects (2)
- Deposition rate (2)
- Die-cast aluminum (2)
- Dimensional accuracy (2)
- Directivity (2)
- Dissimilar metal weld overlays (2)
- Dual phase steel (2)
- Duplex AISI 2205 (2)
- EBSD (2)
- EDXRD (2)
- Edge effects (2)
- Edge quality (2)
- Eigenspannungen (2)
- Electromagnetic backing (2)
- Electromagnetic influence (2)
- Electromagnetically controlled laser beam welding (2)
- Energy efficiency (2)
- Energy input (2)
- Finite element method (2)
- Fluid flow (2)
- Frequency (2)
- Fusion zone size (2)
- GMA welding (2)
- GMA-laser hybrid welding (2)
- GTAW (2)
- Gas shielded arc welding (2)
- Gas tungsten arc welding (GTAW) (2)
- Girth welding (2)
- Global optimisation (2)
- Heat flow (2)
- Heißrisse (2)
- High power (2)
- High power fibre laser (2)
- High power laser (2)
- High power welding (2)
- High-power laser beam welding (2)
- Hochfester Stahl (2)
- Hybrid components (2)
- Industrial application (2)
- Inverse modelling (2)
- Keyhole collapse (2)
- Keyhole mode welding (2)
- Kornfeinung (2)
- LME (2)
- Laser Beam Welding (2)
- Laser Powder Bed Fusion (2)
- Laser Welding (2)
- Laser arc-hybrid welding (2)
- Laser beam Welding (2)
- Laser beam weliding (2)
- Laser beams (2)
- Laser keyhole welding (2)
- Laser powder cladding (2)
- Laser-metal-deposition (2)
- Life Cycle Assessment (LCA) (2)
- Life cycle assessment (LCA) (2)
- Lightweight body shell design (2)
- Lightweight concepts (2)
- Local critical strain (2)
- Marangoni convection (2)
- Marangoni effect (2)
- Martensitbildung (2)
- Martensite kinetic (2)
- Matching ferritic welding electrode (2)
- Material flow (2)
- Melt pool dinamics (2)
- Melt pool dynamics (2)
- Mesh analysis (2)
- Metal mixing (2)
- Model prediction (2)
- Molten pool (2)
- Moving mesh (2)
- Multiple experiments (2)
- Nickel (2)
- Nickel alloys (2)
- Notch stress approach (2)
- Optical flow (2)
- Optimization (2)
- Oscillating magnetic field (2)
- Oscillating vapor plume (2)
- PBF-LB/M (2)
- Partial penetration welding (2)
- Path planning (2)
- Pores (2)
- Porosity prevention (2)
- Porosity reduction (2)
- Preheating (2)
- Process monitoring (2)
- Process reliability (2)
- RSW (2)
- Repair welding (2)
- Resource efficiency (2)
- SMAW (2)
- Seam geometry (2)
- Short calculation time (2)
- Stainless steel (2)
- Stiffness (2)
- Stochastic search method (2)
- Strain rates (2)
- Structural stress approach (2)
- Submerged arc welding (2)
- Surface structuring (2)
- Synchrotron (2)
- Tack welding (2)
- Technical crack detection (2)
- Temperature behavior (2)
- Tensile strength (2)
- Tensile tests (2)
- Testing method (2)
- Thermal analysis (2)
- Thermal cycles (2)
- Thermography (2)
- Thick plates (2)
- Time-to-solution (2)
- Titanium alloy (2)
- Transformable steels (2)
- Ultrasonic vibration (2)
- V groove (2)
- Vapor plume (2)
- Vapour plume (2)
- Volume heat source (2)
- WIG-Schweißen (2)
- Weld metal (2)
- Weld pool (2)
- Welding of aluminum (2)
- Welding of thick metal plates (2)
- Welding thermal cycle (2)
- Welding-induced residual stress (2)
- Widerstandspunktschweißen (2)
- Wire arc additive manufacturing (2)
- Zinc coated steel (2)
- 2D ray tracing (1)
- 3D FE-simulation (1)
- 3D ray tracing (1)
- 3D-FE-Simulation (1)
- 9% Ni Steel (1)
- 9%Ni steel, (1)
- AC magnetic field (1)
- AC magnetic fields (1)
- AGIL (1)
- AISI D2 (1)
- AM (1)
- AM feature integration (1)
- AZ31 magnesium alloy (1)
- Adaptive welding beam oscillation (1)
- Advanced High-Strength Steel (AHSS) (1)
- Advanced high-strength steel (1)
- Advanced high-strength steels (1)
- Al Mg Si alloys (1)
- Al/Mg alloys (1)
- AlMg0.7SiTiB filler wire (1)
- Aluminium alloy (1)
- Aluminium-Legierung 5083 (1)
- Aluminum alloy 2024-T3 (1)
- Aluminum alloys (1)
- Aluminum bronze (1)
- Analysis techniques (1)
- Analytical approach (1)
- Analytical model (1)
- Anisotropic austenitic steel (1)
- Anisotropic austenitic weld (1)
- Applicability (1)
- Arc Welding Automation (1)
- Arc sensor (1)
- Artificial Intelligence (1)
- Artificial intelligence (1)
- Austenitic (1)
- Austenitic steel (1)
- Austenitic welding electrode (1)
- Automated arc welding (1)
- Automated welding (1)
- Automobile engineering (1)
- Automobiles (1)
- Automotive (1)
- Automotive parts (1)
- Axial force (1)
- Bead-on-plate welds (1)
- Beam Welding (1)
- Beam attenuation (1)
- Beam welding (1)
- Bending test (1)
- Boundary element method (1)
- Build - up Strategy (1)
- Build direction (1)
- Build-up Orientation (1)
- Build-up strategy (1)
- Bulging (1)
- Bulging effects (1)
- Buoyancy (1)
- C-Mn steels (1)
- CFD model (1)
- CFD-model (1)
- CO2 laser (1)
- CO2 lasers (1)
- CO2- and Nd:YAG laser (1)
- CTW-Test (1)
- Calculation (1)
- Calculation time (1)
- Carbon Steels (1)
- Carbon dioxide footprint (1)
- Carbon steels (1)
- Cavities (1)
- Charpy V-notch tests (1)
- Cimensional Accuracy (1)
- Circumferential welds (1)
- Cladding parameter (1)
- Clustering (1)
- Coarse grained heat affected zone (1)
- Cold Cracking Test (1)
- Columnar crystal growth (1)
- Combined laser manufacturing (1)
- Combined processes (1)
- Computer vision (1)
- Condition monitoring (1)
- Contact element (1)
- Continuous cooling transformation behaviour (1)
- Continuous cooling transformation diagrams (1)
- Control magnetic field (1)
- Controlled tensile weldability test (1)
- Conventional Ni-based austenitic welding electrode (1)
- Convolutional neural network (1)
- Crack growth (1)
- Cracking susceptibility (1)
- Cracking susceptibility of AHSS (1)
- Cracks in the HAZ (1)
- Crash behaviour (1)
- Crater (1)
- Critical strain rate (1)
- Cryogenic Steel (1)
- DED-EB (1)
- DIC (1)
- DIC technique (1)
- DIP transfer (1)
- Damage prediction (1)
- Deep learning (1)
- Deformation (1)
- Deformation behaviour (1)
- Deformed geometry (1)
- Dendrite growth (1)
- Density measurement (1)
- Deposition welding (1)
- Die-casted aluminum (1)
- Different welding position (1)
- Digital Image Correlation (1)
- Digital factory (1)
- Digitalization (1)
- Direct Energy Deposition (1)
- Direct Laser Metal Deposition (1)
- Direct energy deposition (1)
- Discontinuities (1)
- Dissimilar joints (1)
- Dissimilar welding (1)
- Distortion simulation (1)
- Drive pinion (1)
- Drop out of bead (1)
- Duplex (1)
- Duplex nucleation theory (1)
- Duplex stainless steels (1)
- Duplex steels (1)
- Dynamic fracture tests (1)
- EBAM (1)
- Economic wide technology replacement (1)
- Efficient modelling (1)
- Einspannung (1)
- Electro-thermomechnical model (1)
- Electrode geometry (1)
- Electromagnetic (1)
- Electromagnetic Force (1)
- Electromagnetic rectification (1)
- Electromagnetic stirring (1)
- Electromagnetic support (1)
- Electromagnetic supported degassing (1)
- Electromagnetic weld control (1)
- Electromagnetic weld pool support system (1)
- Electromagnetic weld support system (1)
- Embedded electronics (1)
- End-crater (1)
- Energy density distribution (1)
- Energy dispersive synchrotron X-ray diffraction (1)
- Energy parameters of the arc (1)
- Environment (1)
- Environmental impact categories (1)
- Epitaxial nucleation (1)
- Equivalent volumetric heat source (1)
- Ermüdung (1)
- Execution (1)
- Experimental determination (1)
- Externally loaded hot cracking test (1)
- Externally loaded test (1)
- FE simulation (1)
- FE-model (1)
- FEM (1)
- FEM study (1)
- Fair salary (1)
- Fast calculation (1)
- Fatigue loading (1)
- Fatigue strength (1)
- FeMn-steels (1)
- Ferritic welding electrode (1)
- Ferromagnetic steel (1)
- Ferromagnetic steels (1)
- Ferrous metals and alloys (1)
- Fibre laser (1)
- Fibre lasers (1)
- Fibre-optic lasers (1)
- Filler material distribution (1)
- Filler wire (1)
- Filler wire mixing (1)
- Fillet welds (1)
- Fine-grained Steel (1)
- Finite Element Method (1)
- Finite element method (FEM) (1)
- Finite elements analysis (1)
- Flange width (1)
- Flow (1)
- Flow pattern (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Fracture (1)
- Fracture behaviour (1)
- Fresnel reflection (1)
- Friction spot welding (1)
- Friction welding (1)
- Full penetration laser welding (1)
- Full penetration welding (1)
- Functional analysis (1)
- Functional-analytical solution (1)
- Fusion zone (1)
- Fusion zone profile (1)
- Fusion zone, nickel alloys (1)
- GMA surfacing (1)
- Galvanized steel (1)
- Gap bridging (1)
- Gap compensation (1)
- General analytical solutions (1)
- Gleeble experiments (1)
- Gleeble testing (1)
- Grade S960QL steel (1)
- Grain structure (1)
- Greenhouse gas mitigation (1)
- Greens function method (1)
- HAZ crack (1)
- HSLA (1)
- Hardly separable problem (1)
- Heat Input (1)
- Heat Treatment (1)
- Heat generation (1)
- Heat input (1)
- Heat source calibration (1)
- Heat source configuration (1)
- Heat source models (1)
- Heat transfer (1)
- Heat treatments (1)
- High Power Fibre Laser (1)
- High brightness (1)
- High power fiber laser (1)
- High power laser keyhole welding (1)
- High process speeds (1)
- High speed laser cladding (1)
- High-Power Welding (1)
- High-power Laserbeam Welding (1)
- High-power fibre laser (1)
- High-power laser beam (1)
- High-pressure pipelines (1)
- High-strength fine-grained steels (1)
- High-strength steel sheets (1)
- Higher manganese content (1)
- Highspeed-plasma-laser-cladding (1)
- Hold time (1)
- Hot Cracks (1)
- Human health (1)
- Human health G. (1)
- Hybrid Laser arc Welding (1)
- Hybrid Laser-Arc Welding (1)
- Hybrid Part (1)
- Hybrid Welding (1)
- Hybrid bonding (1)
- Hybrid-laser-arc welding (1)
- Hydrostatic and arc pressure exceed the Laplace pressure (1)
- Hydrostatic force compensation (1)
- Imaging (1)
- Impact Absorbed Energy (1)
- Impact absorbed energy (1)
- In situ strain (1)
- In-situ synchrotron diffraction (1)
- Inconel 625 (1)
- Inconel 939 (1)
- Industrial Parts (1)
- Industrial and Manufacturing Engineering (1)
- Industrial parts (1)
- Initial gap (1)
- Instrumented restrained cracking test (1)
- Instrumentierte Eindringprüfung (1)
- Instumented indentation test (1)
- Integrated alignment features (1)
- Intensity of Restraint (1)
- Investigated materials (1)
- Jacket Support Structures (1)
- Joint-site structure (1)
- Keyhole mode laser beam welding (1)
- Keyhole stability (1)
- LBW (1)
- LCA (1)
- LMD (1)
- LW (1)
- Lamé curves (1)
- Lamé curves approximation (1)
- Laser Metal Deposition (LMD) (1)
- Laser Metal Deposition; Laser Beam Welding; Duplex; Stainless Steel (1)
- Laser and electron beam welding (1)
- Laser beam welding under vacuum/reduced pressure (1)
- Laser beam wlding (1)
- Laser cladding (1)
- Laser cutting (1)
- Laser dispersing (1)
- Laser melting (1)
- Laser metal deposition (LMD) (1)
- Laser metal fusion (1)
- Laser powder bed fusion (1)
- Laser powder-based directed energy deposition (1)
- Laser surfacing (1)
- Laser-Hybrid Welding (1)
- Laser-beam welding, (1)
- Laser-plasma hybrid (1)
- Laserstrahlschweißen (1)
- Life cycle assessment (1)
- Life-cycle assessment (1)
- Lifetime (1)
- Lightweight Design (1)
- Lightweight design (1)
- Lightweight principles (1)
- Liquation Cracking (1)
- Liquid Metal Embrittlement (1)
- Liquid Metal Embrittlement (LME) (1)
- Local fatigue approaches (1)
- Local fatigue spproaches (1)
- Lokale Spannungs-Dehnungskurven (1)
- Low Temperature Toughness (1)
- Low alloy steels (1)
- Low feed rates (1)
- Low heat input GMA welding (1)
- Low heat input Gma welding (1)
- Low transformation temperature (LTT) alloy (1)
- Low transformation temperature filler material (1)
- MHD (1)
- MIG welding (1)
- MRO (1)
- Macro Processing (Joining, Welding) (1)
- Macro processing (1)
- Magnesium (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetic bath support (1)
- Maintenance (1)
- Manganese (1)
- Manganese alloyed stainless steels (1)
- Maritime Components (1)
- Maritime industry (1)
- Martensite start temperature (1)
- Martensite transformation (1)
- Martensitic transformation (1)
- Matching ferritic filler metal (1)
- Material modeling (1)
- Material ranking (1)
- Mathematical modeling (1)
- Measurement (1)
- Mechanical Properties (1)
- Mechanical properties of joints (1)
- Mechanical properties of the joints (1)
- Mechanical property (1)
- Mechanical strength (1)
- Mechanical-technological properties (1)
- Metal forming tools (1)
- Metallic vapour plume (1)
- Microcracking (1)
- Microstructure Tensile strength (1)
- Misalignment of edges (1)
- Misalignment of the edges (1)
- Model calibration (1)
- Model order reduction (1)
- Modeling (1)
- Modeling approach (1)
- Modeling of fluid flow (1)
- Modified varestraint transvarestraint (MVT) hot cracking test (1)
- Molten pool behaviour (1)
- Monitoring systems (1)
- Multi - physical modeling (1)
- Multi pass welding (1)
- Multi-attribute decision method (1)
- Multi-criteria decision support (1)
- Multi-materials joining (1)
- Multi-pass welding (1)
- Multi-physical modeling (1)
- Multi-regional inputeoutput data (1)
- Multiple reflections (1)
- Multirun welding (1)
- Narrow gap welding (1)
- Narrow-gap welding (1)
- Neural Networks (1)
- Neural network (1)
- Ni-based austenitic filler metal (1)
- Ni-based austenitic welding electrode (1)
- Ni-based superalloy (1)
- NiCrBSi (1)
- Nickel-based superalloy (1)
- Non-destructive testing (1)
- Novel metrology (1)
- Novel optical measurement (1)
- Numerical Simulation (1)
- Numerical Welding Simulation (1)
- Numerical analysis (1)
- Numerical approach (1)
- Numerical simulations (1)
- Numerical welding simulations (1)
- Offshore Wind (1)
- Offshore wind turbines (1)
- Open science (1)
- Open source (1)
- Optical measurement (1)
- Optical measurement technique (1)
- Optical measuring technique (1)
- Optical measurment technique (1)
- Orbital process (1)
- Ortsaufgelöst (1)
- PBF/LB-M (1)
- Particles (1)
- Pearlitic microstructure (1)
- Penetration depth (1)
- Phase field method (1)
- Pin profile (1)
- Pipe Welding (1)
- Pipe laying (1)
- Pipe manufacturing (1)
- Pipe weld preparation (1)
- Pipe welding (1)
- Pipeline construction (1)
- Pipeline steel X120 (1)
- Pipeline steel of grade X120 (1)
- Plasma (1)
- Plasma cutting (1)
- Plasma-Transferred-Arc (1)
- Plasma-cut samples (1)
- Plasma-cutting (1)
- Plasma-transferred-arc (1)
- Plastic deformation (1)
- Plume (1)
- Plume heating (1)
- Pointwise constraints (1)
- Position welding (1)
- Post-welding heat treatment (1)
- Powder Analysis (1)
- Pre-weld Preparation (1)
- Precipitation hardening aluminum alloys (1)
- Preheatin (1)
- Prior austenite grain size (1)
- Process diagnostics and simulation (1)
- Process innovations (1)
- Process monitoring and control (1)
- Process procedures (1)
- Process stability (1)
- Proper generalized decomposition (1)
- Pulsed laser beam welding (1)
- Punktschweißkleben (1)
- Punktschweißverbindung (1)
- Quality monitoring (1)
- Rail tracks (1)
- Ray teacing (1)
- Ray-tracing (1)
- Ray-tracing methods (1)
- Recycling (1)
- Reference lists (1)
- Repair and overhaul (1)
- Research data management (1)
- Resistance Spot Welding (RSW) (1)
- Resistance welding (1)
- Result display (1)
- Retained austenite (1)
- Robots (1)
- Root dropping (1)
- SEM (1)
- SEP-1220-3 (1)
- SLM (1)
- SLM printed plasma torch (1)
- Schweißeignung (1)
- Schweißen (1)
- Secondary heat source (1)
- Selektive-laser-melting (1)
- Self-restraint hot cracking (1)
- Self-restraint test (1)
- Sensitivität (1)
- Sensitivitätsanalyse (1)
- Sensivitätsanalyse (1)
- Sensor (1)
- Sensors (1)
- Shear strength (1)
- Sheet (1)
- Shielding atmosphere (1)
- Shielding gas (1)
- Shielding gases (1)
- Ship building (1)
- Shipbuilding (1)
- Shipbuilding steel (1)
- Shrinkage (1)
- Similar and dissimilar material spot weld (1)
- Simufact.welding (1)
- Single-pass welding (1)
- Social Life Cycle Assessment (SLCA) (1)
- Social life cycle assessment (SLCA) (1)
- Software (1)
- Solidification behaviour (1)
- Solidification crack (1)
- Solidification craking (1)
- Stainless austenitic and duplex steels (1)
- Standardization (1)
- Steady-state weld pool (1)
- Steel (1)
- Steel and Al (1)
- Steels (1)
- Strain field (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Strain rate (1)
- Strain-rate (1)
- Stress-strain behavior (1)
- Super martensitic filler material (1)
- Superalloy (1)
- Superelliptic Lamé curves (1)
- Support structures (1)
- Surface cracks (1)
- Surface roughness (1)
- Surface texturing (1)
- Susceptibility to cracking (1)
- Sustainability assessment (1)
- System technology (1)
- TIG welding (1)
- TRIP (1)
- TRIP - transformation induced plasticity (1)
- Tandem Gas Metal Arc Welding (1)
- Tandem gas metal arc welding (1)
- Tandem welding (1)
- Temperature Field Generation (1)
- Temperature distribution (1)
- Tensile Strength (1)
- Tensile performance (1)
- Tensile properties (1)
- Tensile resistance spot welding experiment (1)
- Tensileshear (1)
- Test method (1)
- Texture (1)
- Thermal energy generation (1)
- Thermal softening (1)
- Thermo physical simulation (1)
- Thermo-capillary convection (1)
- Thermo-fluid dynamics (1)
- Thermomechanical material properties (1)
- Thermophysical material properties (1)
- Thick materials (1)
- Thick metal plate welding (1)
- Thick plate (1)
- Thick plate welding (1)
- Thick walled parts (1)
- Thick-Walled Steel (1)
- Thick-plate welding (1)
- Thick-walled Structures (1)
- Ti - 6Al - 4V (1)
- Ti-6Al-4 V (1)
- Ti3Al2.5V (1)
- TiB2 (1)
- Tick plates (1)
- Tool torque (1)
- Torsion (1)
- Toughness (1)
- Transformation induced plasticity (1)
- Transformation induced plasticity (TRIP) (1)
- Transformation-induced plasticity (TRIP) (1)
- Traverse force (1)
- Tube welding (1)
- Tungsten carbide (1)
- Turbine blade (1)
- Turbine components (1)
- Turbine industry (1)
- Turbulence (1)
- Two-dimensional solidification (1)
- Two-run welding technique (1)
- Ultrasonic C-scan image (1)
- Ultrasonic field (1)
- Ultrasonic non-destructive evaluation (1)
- Unalloyed steels (1)
- V-notch impact toughness (1)
- Vacuum (1)
- Vapor recondensation (1)
- Vaporization (1)
- Variables influencing hot cracking (1)
- Vehicle bodies (1)
- Verzug (1)
- Viscoplasticity (1)
- Volumetric heat source (1)
- Wear resistance (1)
- Weld cracks (1)
- Weld defects (1)
- Weld end crater (1)
- Weld imperfections (1)
- Weld microstructure (1)
- Weld plan modification (1)
- Weld pool behavior (1)
- Weld pool geometry (1)
- Weld pool modeling (1)
- Weld pool shape approximation (1)
- Weld pool stabilization (1)
- Weld pool support (1)
- Weld root (1)
- Weld specimens (1)
- Weldbonded joint behaviour (1)
- Weldbonded joints (1)
- Weldbonding process reliability (1)
- Welding Current (1)
- Welding Simulation (1)
- Welding costs (1)
- Welding cracks (1)
- Welding distortion (1)
- Welding distortions (1)
- Welding jig (1)
- Welding of AlMg3 (1)
- Welding parameter (1)
- Welding process selection (1)
- Welding process simulation (1)
- Welding residual stress (1)
- Welding residual stresses (1)
- Welding under external loading (1)
- Weldx (1)
- Werkstoffe (1)
- Wineglass shape (1)
- Wire electron beam additive manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- Work-flow (1)
- Wärmequellenkonfiguration (1)
- X-ray computer tomography (1)
- X8Ni9 (1)
- YAG lasers (1)
- Zinc (1)
- Zink (1)
- cryogenic steel (1)
- deposition welding (1)
- digital image correlation (1)
- dual phase steel (1)
- hardness (1)
- highspeed plasma laser cladding (1)
- laser energy distribution (1)
- laser hybrid welding (1)
- laser welding (1)
- microstructure (1)
- resistance spot welding (1)
- sensitivity analysis (1)
- tensile strength (1)
- thermal cycles (1)
- thick plate welding (1)
- welding residual stresses (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (182)
- 9.3 Schweißtechnische Fertigungsverfahren (177)
- 9.6 Additive Fertigung metallischer Komponenten (3)
- 5 Werkstofftechnik (2)
- 5.2 Metallische Hochtemperaturwerkstoffe (2)
- 7 Bauwerkssicherheit (2)
- 7.7 Modellierung und Simulation (2)
- 9.0 Abteilungsleitung und andere (2)
- 5.5 Materialmodellierung (1)
Eingeladener Vortrag
- nein (25)
The Directed Energy Deposition process is used in a wide range of applications including the repair, coating or modification of existing structures and the additive manufacturing of individual parts. As the process is frequently applied in the aerospace industry, the requirements for quality assurance are extremely high. Therefore, more and more sensor systems are being implemented for process monitoring. To evaluate the generated data, suitable methods must be developed. A solution, in this context, was the application of artificial neural networks (ANNs). This article demonstrates how measurement data can be used as input data for ANNs. The measurement data were generated using a pyrometer, an emission spectrometer, a camera (Charge-Coupled Device) and a laser scanner. First, a concept for the extraction of relevant features from dynamic measurement data series was presented. The developed method was then applied to generate a data set for the quality prediction of various geometries, including weld beads, coatings and cubes. The results were compared to ANNs trained with process parameters such as laser power, scan speed and powder mass flow. It was shown that the use of measurement data provides additional value. Neural networks trained with measurement data achieve significantly higher prediction accuracy, especially for more complex geometries.
The application of hybrid laser-arc welding (HLAW) for joining closed circumferential welds is a challenge due to the high risk of forming a defective overlap area with a shrinkage void or solidification cracks in the material thickness. A series of HLAW experiments were performed to understand the development of a faulty overlap area when closing the circumferential weld. Welding trials on flat specimens and pipe segments were supported by numerical analyses in which the thermomechanical behavior of the welds in the overlap area was investigated. Different process control strategies were tested, including variations in defocusing levels and the overlap length. The newly developed HLAW head, including laser optics with a motor-driven collimation system, made it possible to defocus the laser beam during welding without disturbing the stability of the welding process. High-level defocusing of the laser beam of more than 40 mm relative to the specimen surface with a resulting beam diameter of > 2.9 mm, and in combination with a short overlap length of 15 mm, was promising with respect to the formation of a desired cup-shaped weld profile that is resistant to solidification cracks.
During resistance spot welding of zinc-coated advanced high-strength steels (AHSSs) for automotive production, liquid metal embrittlement (LME) cracking may occur in the event of a combination of various unfavorable influences. In this study, the interactions of different welding current levels and weld times on the tendency for LME cracking in third-generation AHSSs were investigated. LME manifested itself as high penetration cracks around the circumference of the spot welds for welding currents closely below the expulsion limit. At the same time, the observed tendency for LME cracking showed no direct correlation with the overall heat input of the investigated welding processes. To identify a reliable indicator of the tendency for LME cracking, the local strain rate at the origin of the observed cracks was analyzed over the course of the welding process via finite element simulation. While the local strain rate showed a good correlation with the process-specific LME cracking tendency, it was difficult to interpret due to its discontinuous course. Therefore, based on the experimental measurement of electrode displacement during welding, electrode indentation velocity was proposed as a descriptive indicator for quantifying cracking tendency.
This article presents a cost-effective and reliable method for welding 30 mm thick sheets of shipbuilding steel EH36. The method proposes to perform butt welding in a two-run technique using hybrid laser arc welding (HLAW) and submerged arc welding (SAW). The HLAW is performed as a partial penetration weld with a penetration depth of approximately 25 mm. The SAWis carried out as a second run on the opposite side. With a SAWpenetration depth of 8 mm, the weld cross-section is closed with the reliable intersection of both passes. The advantages of the proposed welding method are: no need for forming of the HLAW root; the SAW pass can effectively eliminate pores in the HLAWroot; the high stability of the welding process regarding the preparation quality of the weld edges. Plasma cut edges can be welded without lack of fusion defects. The weld quality achieved is confirmed by destructive tests.
With regard to efficient production, it is desirable to combine the respective advantages of additively and conventionally manufactured components. Particularly in the case of large-volume components that also include filigree or complex structures, it makes sense to divide the overall part into individual elements, which afterwards have to be joined by welding.
The following research represents a first step in fundamentally investigating and characterizing the joint welding of Laser Powder Bed Fusion (L-PBF) components made of Inconel 718. For this purpose, bead-on-plate welds were performed on plates manufactured using the L-PBF process and compared with the conventionally manufactured material. Conventional laser beam welding was used as welding process. The weld geometry was investigated as a function of the L-PBF build-up orientation. It was found that the welding depth and weld geometry differ depending on this orientation and in comparison to the conventional material.
This study presents mechanisms of the evolution of a narrowed region in the weld pool center during deep penetration laser beam welding. In numerous numerical studies presented in this study, it was also found that the local reduction of the weld pool size can cause detrimental effects on the melt flow behavior and the resulting properties of the welds. A particularly large influence of this effect was identified in three aspects. First, the local variation of the solidification sequence of the weld pool causes an increase in the hot-cracking susceptibility due to a locally delayed solidification. Second, it was proven that a change in the local length and width of the weld pool is associated with an adverse impact on the potential flow routes of the molten material that induces stronger local variations of its solidification. Thus, the element mixing, e.g., during the welding with filler materials, is blocked. This leads to a non-homogeneous chemical composition of the final weld and can cause undesired effects on the final material properties. Finally, another observed effect is related to the reduced ability of process pores to reach the top surface. As this type of porosity is usually produced around the keyhole tip, the change of the fluid flow regime above this area plays a significant role in determining the final path of the pores until the premature solidification in the middle of the weld pool captures them. This study summarizes mainly numerical results that were supported by selected experimental validation results.
Laser metal deposition (LMD) as an additive manufacturing technique became increasingly important in recent years and thus the demand for component safety. This is the reason, for the need for reliable in-situ defect detection techniques. For laser beam weld seams an optical measurement technique based on an optical flow algorithm was successfully used to define the critical straining conditions that lead to hot cracking. This algorithm was adapted for bead-on-plate weld seams on LMD deposited layers of IN718 alloy while performing external strain on the specimen in an externally loaded hot cacking test facility. The resulting transversal hot cracks along the weld seam were localized via X-Ray inspection and the type of cracking confirmed by Scanning Electron Microscopy (SEM). The strain distribution was measured in the vicinity of the solidification front and correlated to the detected hot cracks. Based on the results this technique could be adopted for LMD experiments.
Duplex stainless steels combine the positive properties of its two phases, austenite and ferrite. Due to its good corrosion resistance, high tensile strength and good ductility it has multiple applications. But laser beam welding of duplex steels changes the balanced phase distribution in favor of ferrite. This results in a higher vulnerability to corrosion and a lower ductility. In this study different powder combinations consisting of duplex and nickel for coating layers by laser metal deposition are investigated. Afterwards laser tracks are welded, and the temperature cycles measured. The ferrite content of the tracks are analyzed by feritscope, metallographic analysis and Electron Backscatter Diffraction. The goal is the development of a powder mixture allowing for a duplex microstructure in a two-step process, where firstly the edges of the weld partners are coated with the powder mixture by LMD and secondly those edges are laser beam welded. The powder mixture identified by the pretests is tested in the two-step process and analyzed by metallographic analysis, energy dispersive X-ray spectroscopy and Vickers hardness tests. The resulting weld seams show a balanced duplex microstructure with a homogenous nickel distribution and a hardness of the weld seam similar to the base material.
A technique for calculating the main solidification parameters for a two-dimensional columnar crystal growth during complete penetration laser beam welding of thin steel sheets was developed. Given that the weld pool interface is described by Lamé curves (superellipses) within the horizontal plane of growth, general analytical solutions were derived for the geometry of the crystal axis and the corresponding growth rate and cross-sectional area of the crystal. A dimensionless analysis was performed to provide insights on the dependence of the solidification parameters on the shape and dimensions of the rear part of the weld pool boundary. The derived solutions were applied for the case of complete penetration laser beam keyhole welding of 2 mm thick 316L austenitic chromium-nickel steel sheets. It was shown that the reconstruction of the weld pool boundary with Lamé curves provides higher accuracy and flexibility compared to results obtained with elliptical functions. The validity of the proposed technique and the derived analytical solutions was backed up by a comparison of the obtained solutions to known analytical solutions and experimentally determined shapes and sizes of the crystals on the top surface of the sheet. The dimensions of the calculated crystal axis correlated well with the experimentally obtained results.
It is already known that the laser beam welding (LBW) or hybrid laser-arc welding (HLAW) processes are sensitive to manufacturing tolerances such as gaps and misalignment of the edges, especially at welding of thick-walled steels due to its narrow beam diameter. Therefore, the joining parts preferably have to be milled. The study deals with the influence of the edge quality, the gap and the misalignment of edges on the weld seam quality of hybrid laser-arc welded 20-mm-thick structural steel plates which were prepared by laser and plasma cutting. Single-pass welds were conducted in butt joint configuration. An AC magnet was used as a contactless backing. It was positioned under the workpiece during the welding process to prevent sagging. The profile of the edges and the gap between the workpieces were measured before welding by a profile scanner or a digital camera, respectively. With a laser beam power of just 13.7 kW, the single-pass welds could
be performed. A gap bridgeability up to 1 mm at laser-cut and 2 mm at plasma-cut samples could be reached respectively.
Furthermore, a misalignment of the edges up to 2 mm could be welded in a single pass. The new findings may eliminate the need for cost and time-consuming preparation of the edges.